SPEC(R) ACCEL(TM) ACC Summary GIGABYTE FirePro s9150 GIGABYTE MD70-HB0 Motherboard Test Sponsor: Cirrascale Corporation Thu Feb 19 17:14:10 2015 ACCEL License: 3842 Test date: Feb-2015 Test sponsor: Cirrascale Corporation Hardware availability: Jul-2014 Tested by: PathScale Inc. Software availability: Mar-2015 Base Base Base Peak Peak Peak Benchmarks Ref. Run Time Ratio Ref. Run Time Ratio -------------- ------ --------- --------- ------ --------- --------- 303.ostencil 145 32.2 4.50 S 145 32.2 4.50 S 303.ostencil 145 32.2 4.51 * 145 32.2 4.51 * 303.ostencil 145 32.1 4.51 S 145 32.1 4.51 S 304.olbm 455 55.3 8.23 * 455 55.3 8.23 * 304.olbm 455 53.7 8.48 S 455 53.7 8.48 S 304.olbm 455 55.4 8.21 S 455 55.4 8.21 S 314.omriq 956 65.5 14.6 S 956 65.5 14.6 S 314.omriq 956 65.2 14.7 S 956 65.2 14.7 S 314.omriq 956 65.4 14.6 * 956 65.4 14.6 * 350.md 252 95.2 2.65 S 252 80.5 3.13 S 350.md 252 95.3 2.65 * 252 80.5 3.13 * 350.md 252 95.4 2.64 S 252 80.4 3.14 S 351.palm 370 256 1.44 * 370 256 1.45 S 351.palm 370 256 1.44 S 370 254 1.46 * 351.palm 370 254 1.46 S 370 254 1.46 S 352.ep 530 265 2.00 S 530 236 2.24 S 352.ep 530 265 2.00 * 530 236 2.24 * 352.ep 530 265 2.00 S 530 237 2.24 S 353.clvrleaf 445 145 3.06 S 445 145 3.06 S 353.clvrleaf 445 141 3.15 S 445 141 3.15 S 353.clvrleaf 445 143 3.11 * 445 143 3.11 * 354.cg 408 428 0.953 S 408 428 0.953 S 354.cg 408 428 0.953 S 408 428 0.953 S 354.cg 408 428 0.953 * 408 428 0.953 * 355.seismic 370 89.5 4.13 * 370 78.0 4.75 S 355.seismic 370 89.2 4.15 S 370 77.5 4.78 S 355.seismic 370 89.9 4.12 S 370 77.6 4.77 * 356.sp 276 82.5 3.35 * 276 82.5 3.35 * 356.sp 276 82.6 3.34 S 276 82.6 3.34 S 356.sp 276 82.5 3.35 S 276 82.5 3.35 S 357.csp 270 56.1 4.81 S 270 56.1 4.81 S 357.csp 270 55.8 4.84 S 270 55.8 4.84 S 357.csp 270 56.1 4.81 * 270 56.1 4.81 * 359.miniGhost 369 206 1.79 S 369 206 1.79 S 359.miniGhost 369 203 1.82 * 369 203 1.82 * 359.miniGhost 369 202 1.83 S 369 202 1.83 S 360.ilbdc 367 249 1.48 S 367 225 1.63 * 360.ilbdc 367 248 1.48 * 367 225 1.63 S 360.ilbdc 367 248 1.48 S 367 224 1.64 S 363.swim 230 108 2.13 S 230 108 2.13 S 363.swim 230 91.3 2.52 S 230 91.3 2.52 S 363.swim 230 97.3 2.36 * 230 97.3 2.36 * 370.bt 223 49.8 4.47 S 223 49.8 4.47 S 370.bt 223 49.4 4.51 * 223 49.4 4.51 * 370.bt 223 49.4 4.52 S 223 49.4 4.52 S ============================================================================== 303.ostencil 145 32.2 4.51 * 145 32.2 4.51 * 304.olbm 455 55.3 8.23 * 455 55.3 8.23 * 314.omriq 956 65.4 14.6 * 956 65.4 14.6 * 350.md 252 95.3 2.65 * 252 80.5 3.13 * 351.palm 370 256 1.44 * 370 254 1.46 * 352.ep 530 265 2.00 * 530 236 2.24 * 353.clvrleaf 445 143 3.11 * 445 143 3.11 * 354.cg 408 428 0.953 * 408 428 0.953 * 355.seismic 370 89.5 4.13 * 370 77.6 4.77 * 356.sp 276 82.5 3.35 * 276 82.5 3.35 * 357.csp 270 56.1 4.81 * 270 56.1 4.81 * 359.miniGhost 369 203 1.82 * 369 203 1.82 * 360.ilbdc 367 248 1.48 * 367 225 1.63 * 363.swim 230 97.3 2.36 * 230 97.3 2.36 * 370.bt 223 49.4 4.51 * 223 49.4 4.51 * SPECaccel_acc_base 3.10 SPECaccel_acc_peak 3.21 HARDWARE -------- CPU Name: Intel Xeon E5-2637 v3 CPU Characteristics: Intel Turbo Boost Technology up to 3.70 GHz CPU MHz: 3500 CPU MHz Maximum: 3700 FPU: Integrated CPU(s) enabled: 8 cores, 2 chips, 4 cores/chip, 2 threads/core CPU(s) orderable: 1,2 chip Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 256 KB I+D on chip per core L3 Cache: 15 MB I+D on chip per chip Other Cache: None Memory: 32 GB (4 x 8 GB 1Rx4 PC4-2133R-15, running at 2133 MHz) Disk Subsystem: Western Digital Model: WD7500BPKT-00PK4T0 750Gb SATA 7200 rpm Other Hardware: None ACCELERATOR ----------- Accel Model Name: AMD FirePro s9150 Accel Vendor: AMD Accel Name: FirePro s9150 Type of Accel: GPU Accel Connection: PCIe 3.0 16x Does Accel Use ECC: No Accel Description: GPU set to high performance of sclk: 86100 mclk: 125000. See notes below. Accel Driver: AMD ATI Radeon Linux x86_64 Kernel Module 3.19.0+ SOFTWARE -------- Operating System: CentOS release 6.6 (Final) 3.19.0PathScale+ Compiler: PathScale ENZO 2015 v6.0 File System: ext4 System State: Run level 3 (add definition here) Other Software: None Platform Notes -------------- Sysinfo program /home/pathscale/ACCEL/Docs/sysinfo $Rev: 6874 $ $Date:: 2013-11-20 #$ 0953404ef7e75a5f9bbb534c6de3f831 running on Cirrascale Thu Feb 19 14:14:13 2015 This section contains SUT (System Under Test) info as seen by some common utilities. To remove or add to this section, see: http://www.spec.org/accel/Docs/config.html#sysinfo From /proc/cpuinfo model name : Intel(R) Xeon(R) CPU E5-2637 v3 @ 3.50GHz 2 "physical id"s (chips) 16 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 4 siblings : 8 physical 0: cores 0 1 4 5 physical 1: cores 0 1 4 5 cache size : 15360 KB From /proc/meminfo MemTotal: 32946036 kB HugePages_Total: 0 Hugepagesize: 2048 kB /usr/bin/lsb_release -d CentOS release 6.6 (Final) From /etc/*release* /etc/*version* centos-release: CentOS release 6.6 (Final) redhat-release: CentOS release 6.6 (Final) system-release: CentOS release 6.6 (Final) system-release-cpe: cpe:/o:centos:linux:6:GA uname -a: Linux Cirrascale 3.19.0PathScale+ #6 SMP Tue Feb 17 03:20:41 PST 2015 x86_64 x86_64 x86_64 GNU/Linux run-level 3 Feb 19 14:06 SPEC is set to: /home/pathscale/ACCEL Filesystem Type Size Used Avail Use% Mounted on /dev/sda1 ext4 96G 26G 66G 28% / Additional information from dmidecode: Warning: Use caution when you interpret this section. The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. BIOS GIGABYTE F15 11/28/2014 Memory: 4x Kinston 9995589-001.A00G 8 GB 1 rank 2133 MHz 12x NO DIMM NO DIMM (End of data from sysinfo program) 3.19.0PathScale+ is built from exactly this commit with one additionally patch below https://github.com/torvalds/linux/commit/8cc748aa76c921d8834ef00f762f31acd2c93aa8 Author: Alex Deucher Date: Thu Feb 12 00:40:58 2015 -0500 drm/radeon: fix voltage setup on hawaii Missing parameter when fetching the real voltage values from atom. Fixes problems with dynamic clocking on certain boards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=87457 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index dbc94f3..fc1b3f3 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -3289,6 +3289,7 @@ int radeon_atom_get_voltage_evv(struct radeon_device *rdev, args.in.ucVoltageType = VOLTAGE_TYPE_VDDC; args.in.ucVoltageMode = ATOM_GET_VOLTAGE_EVV_VOLTAGE; + args.in.usVoltageLevel = cpu_to_le16(virtual_voltage_id); args.in.ulSCLKFreq = This run fixes a cooling issue which wasn't caught in previous runs. A 40w fan was adjusted in order to provide airflow for the passively cooled s9150 General Notes ------------- ECC disabled by default GPU Boost mode enabled by setting the device to the following below high performance mode: "echo high > /sys/class/drm/card0/device/power_dpm_force_performance_level" The details for high performance mode: cat /sys/kernel/debug/dri/64/radeon_pm_info uvd disabled vce disabled power level avg sclk: 86100 mclk: 125000 The Intel documentation says the CPU can boost to 3700 Mhz, but dmidecode reports Max Speed: 3600 MHz Kit built system using no case and just mounted on a test bench Base Compiler Invocation ------------------------ C benchmarks: pathcc Fortran benchmarks: pathf90 Benchmarks using both Fortran and C: pathcc pathf90 Base Portability Flags ---------------------- 314.omriq: -std=gnu89 Base Optimization Flags ----------------------- C benchmarks: -O3 -acc -device=hawaii Fortran benchmarks: -O3 -acc -device=hawaii Benchmarks using both Fortran and C: -O3 -acc -device=hawaii Peak Compiler Invocation ------------------------ C benchmarks: pathcc Fortran benchmarks: pathf90 Benchmarks using both Fortran and C: pathcc pathf90 Peak Portability Flags ---------------------- 314.omriq: -std=gnu89 Peak Optimization Flags ----------------------- C benchmarks: 303.ostencil: basepeak = yes 304.olbm: basepeak = yes 314.omriq: basepeak = yes 352.ep: -O3 -acc -device=hawaii -fprelaxed-offload 354.cg: basepeak = yes 357.csp: basepeak = yes 370.bt: basepeak = yes Fortran benchmarks: 350.md: -O3 -acc -device=hawaii -fprelaxed-offload 351.palm: -O3 -acc -device=hawaii -CG2:gpu-no-sched-regpressure 355.seismic: Same as 350.md 356.sp: basepeak = yes 360.ilbdc: -O3 -acc -device=hawaii -CG2:gpu-no-misched 363.swim: basepeak = yes Benchmarks using both Fortran and C: 353.clvrleaf: basepeak = yes 359.miniGhost: basepeak = yes The flags file that was used to format this result can be browsed at http://www.spec.org/accel/flags/pathscale2015_flags.20150318.html You can also download the XML flags source by saving the following link: http://www.spec.org/accel/flags/pathscale2015_flags.20150318.xml SPEC and SPEC ACCEL are registered trademarks or trademarks of the Standard Performance Evaluation Corporation. All other brand and product names appearing in this result are trademarks or registered trademarks of their respective holders. ---------------------------------------------------------------------------------------------------------- For questions about this result, please contact the tester. For other inquiries, please contact webmaster@spec.org. Copyright 2014-2015 Standard Performance Evaluation Corporation Tested with SPEC ACCEL v1.0. Report generated on Wed Mar 18 11:12:32 2015 by ACCEL ASCII formatter v1290. Originally published on 18 March 2015.