SPEC Seal of Reviewal CINT2000 Result
Copyright © 1999-2004 Standard Performance Evaluation Corporation
SGI
SGI 2400 32X 400MHz R12k
SPECint_rate2000 = 125    
SPECint_rate_base2000 = 115    
SPEC license # 4 Tested by: SGI Test date: May-2000 Hardware Avail: Jun-2000 Software Avail: Apr-2000
Graph Scale Benchmark Base
Copies
Base
Runtime
Base
Ratio
Copies Runtime Ratio
164.gzip base result bar (82.1)
164.gzip peak result bar (85.2)
164.gzip 32 633    82.1   32 610    85.2  
175.vpr base result bar (139)
175.vpr peak result bar (144)
175.vpr 32 375    139     32 361    144    
176.gcc base result bar (115)
176.gcc peak result bar (115)
176.gcc 32 356    115     32 355    115    
181.mcf base result bar (173)
181.mcf peak result bar (196)
181.mcf 32 387    173     32 341    196    
186.crafty base result bar (123)
186.crafty peak result bar (122)
186.crafty 32 302    123     32 305    122    
197.parser base result bar (104)
197.parser peak result bar (110)
197.parser 32 643    104     32 607    110    
252.eon base result bar (133)
252.eon peak result bar (132)
252.eon 32 362    133     32 365    132    
253.perlbmk base result bar (90.2)
253.perlbmk peak result bar (90.7)
253.perlbmk 32 741    90.2   32 737    90.7  
254.gap base result bar (71.8)
254.gap peak result bar (70.9)
254.gap 32 569    71.8   32 576    70.9  
255.vortex base result bar (107)
255.vortex peak result bar (196)
255.vortex 32 657    107     32 360    196    
256.bzip2 base result bar (122)
256.bzip2 peak result bar (136)
256.bzip2 32 457    122     32 410    136    
300.twolf base result bar (166)
300.twolf peak result bar (166)
300.twolf 32 673    166     32 672    166    
  SPECint_rate_base2000 115      
  SPECint_rate2000 125    

Hardware
Hardware Vendor: SGI
Model Name: SGI 2400 32X 400MHz R12k
CPU: R12000
CPU MHz: 400
FPU: Integrated
CPU(s) enabled: 32 cores, 32 chips, 1 core/chip
CPU(s) orderable: 2-64
Parallel: No
Primary Cache: 32KBI + 32KBD on chip
Secondary Cache: 8MB(I+D) off chip
L3 Cache: N/A
Other Cache: N/A
Memory: 32GB
Disk Subsystem: 1 x 18 GB SCSI, 10 x 18 GB FC (striped)
Other Hardware: None
Software
Operating System: IRIX 6.5.8f
Compiler: MIPSpro 7.3.1.1m C, C++, Fortran90
File System: xfs
System State: Single-user
Notes / Tuning Information
Baseline optimization flags (C and C++ use same flags):
   PASS1 : -Ofast=ip27 -IPA:use_intrinsic -fb_create /tmp/SPEC2000/FBDIR/base/$(EXEBASE)
   PASS2 : -Ofast=ip27 -IPA:use_intrinsic -fb_opt /tmp/SPEC2000/FBDIR/base/$(EXEBASE)
Portability Flags:
   176.gcc: -DUSG  -Dalloca=__builtin_alloca -DMIPS -DHOST_WORDS_BIG_ENDIAN
   186.crafty: -DSGI
   253.perlbmk: -DSPEC_CPU2000_SGI -DI_FCNTL
   254.gap: -DSYS_IS_USG -DSYS_HAS_TIME_PROTO -DSYS_HAS_SIGNAL_PROTO -DSYS_HAS_IOCTL_PROTO
   300.twolf: -DHAVE_SIGNED_CHAR
Peak optimization flags:
note:  all occurances of (FEEDBACK) below means compiled with a two-step process:
   PASS1 = -fb_create /tmp/SPEC2000/FBDIR_peak/$(EXEBASE)
   PASS2 = -fb_opt /tmp/SPEC2000/FBDIR_peak/$(EXEBASE)
 164.gzip: -Ofast=ip27 -IPA:space=500:plimit=500 -lmalloc (FEEDBACK)
 175.vpr: -Ofast=ip27 -IPA:space=300:plimit=10000:callee_limit=5000:linear=on -LNO:prefetch_ahead=2 
 .        -INLINE:aggressive=on -OPT:Olimit=0:alias=disjoint:alias=restrict -lmalloc (FEEDBACK)
 181.mcf: -Ofast=ip27 -IPA:min_hot=14 -lmalloc (FEEDBACK)
 176.gcc: -Ofast=ip27 (FEEDBACK)
 186.crafty: -Ofast=ip27 -LNO:prefetch=0 -OPT:goto=off -lmalloc (FEEDBACK)
 197.parser: -Ofast=ip27 -IPA:min_hot=14 (FEEDBACK)
 252.eon: -Ofast=ip27 -LNO:prefetch=0 -LANG:exceptions=off -lmalloc (FEEDBACK)
 253.perlbmk: -Ofast=ip27 -IPA:use_intrinsic -Wl,-x (FEEDBACK)
 254.gap: -Ofast=ip27 -IPA:use_intrinsic -OPT:unroll_analysis=off:unroll_size=0:unroll_times_max=4
 . -OPT:alias=restrict:alias=disjoint -IPA:min_hot=7 -lmalloc (FEEDBACK)
 255.vortex: -Ofast=ip27 -IPA:use_intrinsic -OPT:unroll_analysis=off:unroll_size=0:unroll_times_max=4 -LNO:opt=0 
 .           -CG:ld_latency=5 -IPA:min_hot=14 -TENV:X=4 -IPA:space=500:plimit=3600 -OPT:goto=off (FEEDBACK)
 256.bzip2: -Ofast=ip27 -IPA:min_hot=5:space=500:plimit=2900 -INLINE:aggressive=on (FEEDBACK)
 300.twolf: -Ofast=ip27 -IPA:use_intrinsic (FEEDBACK)
The following O/S parameters were set:
   setenv PAGESIZE_DATA 4096
   setenv PAGESIZE_TEXT 4096
   setenv PAGESIZE_STACK 4096
   systune -i ; percent_totalmem_4m_pages = 50 ; nlpages_4m = 128
   limit stacksize 500000
The following is done before building each benchmark that requires (FEEDBACK):
 rm -rf /tmp/SPEC2000 ; mkdir /tmp/SPEC2000 ; cd /tmp/SPEC2000 ; mkdir FBDIR_base ; mkdir FBDIR_peak


For questions about this result, please contact the tester.
For other inquiries, please contact webmaster@spec.org
Copyright © 1999-2004 Standard Performance Evaluation Corporation

First published at SPEC.org on 06-Jun-2000

Generated on Fri Mar 25 16:00:45 2005 by SPEC CPU2000 HTML formatter v1.01