SPEC Seal of Reviewal CINT2000 Result
Copyright © 1999-2004 Standard Performance Evaluation Corporation
Fujitsu Siemens Computers
PRIMEPOWER400 (500MHz)
SPECint_rate2000 = 8.24 
SPECint_rate_base2000 = 7.53 
SPEC license # 22 Tested by: Fujitsu Limited Test date: Feb-2001 Hardware Avail: Apr-2001 Software Avail: Apr-2001
Graph Scale Benchmark Base
Copies
Base
Runtime
Base
Ratio
Copies Runtime Ratio
164.gzip base result bar (7.04)
164.gzip peak result bar (7.08)
164.gzip 2 461    7.04  2 459    7.08 
175.vpr base result bar (6.92)
175.vpr peak result bar (7.36)
175.vpr 2 470    6.92  2 441    7.36 
176.gcc base result bar (5.65)
176.gcc peak result bar (7.60)
176.gcc 2 452    5.65  2 336    7.60 
181.mcf base result bar (9.18)
181.mcf peak result bar (9.54)
181.mcf 2 455    9.18  2 438    9.54 
186.crafty base result bar (7.94)
186.crafty peak result bar (8.80)
186.crafty 2 292    7.94  2 264    8.80 
197.parser base result bar (7.85)
197.parser peak result bar (7.86)
197.parser 2 532    7.85  2 531    7.86 
252.eon base result bar (8.21)
252.eon peak result bar (8.88)
252.eon 2 368    8.21  2 340    8.88 
253.perlbmk base result bar (8.23)
253.perlbmk peak result bar (8.74)
253.perlbmk 2 507    8.23  2 478    8.74 
254.gap base result bar (4.93)
254.gap peak result bar (4.92)
254.gap 2 518    4.93  2 518    4.92 
255.vortex base result bar (11.7)
255.vortex peak result bar (12.1)
255.vortex 2 377    11.7   2 363    12.1  
256.bzip2 base result bar (7.70)
256.bzip2 peak result bar (7.90)
256.bzip2 2 452    7.70  2 440    7.90 
300.twolf base result bar (7.02)
300.twolf peak result bar (10.2)
300.twolf 2 992    7.02  2 683    10.2  
  SPECint_rate_base2000 7.53   
  SPECint_rate2000 8.24 

Hardware
Hardware Vendor: Fujitsu Siemens Computers
Model Name: PRIMEPOWER400 (500MHz)
CPU: SPARC64 GP
CPU MHz: 501
FPU: Integrated
CPU(s) enabled: 2 cores, 2 chips, 1 core/chip
CPU(s) orderable: 1 to 4
Parallel: None
Primary Cache: 128KBI+128KBD on chip
Secondary Cache: 8MB(I+D) off chip, per CPU
L3 Cache: None
Other Cache: None
Memory: 2048MB
Disk Subsystem: 1 x 36.4GB SCSI (10025rpm)
Other Hardware: Ethernet
Software
Operating System: Solaris 8
Compiler: Fujitsu Parallelnavi 1.0.1
Sun Forte Developer 6 update 1
File System: ufs
System State: single user
Notes / Tuning Information
Baseline (except 252.eon, for Parallelnavi 1.0.1): -Kfast_GP=3,largepage
 fdo_pre0=rm -rf `pwd`/*.fbk
 PASS1=-Kpg
 PASS2=-Kpu=$(EXEBASE).fbk
(252.eon, for Forte Developer 6 update 1): -fast -xcrossfile -xarch=v8plus
 fdo_pre0=rm -rf `pwd`/../feedback.profile `pwd`/SunWS_cache
 PASS1=-xprofile=collect:`pwd`/../feedback
 PASS2=-xprofile=use:`pwd`/../feedback

Peak (for Parallelnavi 1.0.1):
 fdo_pre0=rm -rf `pwd`/*.fbk
 PASS1=-Kpg
 PASS2=-Kpu=$(EXEBASE).fbk
 164.gzip: -Kfast_GP=3,largepage
 175.vpr: -Kfast_GP=4,staticclump,memalias,switchopt,cond,GREG,nounroll,largepage,onefile,NOFLTLD=3,xi=30
 181.mcf: -Kfast_GP=2,nounroll,memalias,restp,prefetch=4,largepage -x-
 186.crafty: -Kfast_GP=3,switchopt,cond,noiopt,staticclump,xi=6,memalias,largepage
 197.parser: -Kfast_GP=3,switchopt,cond,staticclump,use_rodata,largepage,funcalign=128
 253.perlbmk: -Kfast_GP=3,memalias,switchopt,largepage,bcopy
 254.gap: -Kfast_GP=3,largepage
 256.bzip2: Kfast_GP=3,NOFLTLD=1,use_rodata,staticclump,xi=8,cfunc,memalias,restp,largepage,funcalign=128
 300.twolf: -Kfast_GP=5,GREG,popt,cfunc,staticclump,use_rodata,xi=10,nounroll,largepage,bcopy
(for Forte Developer 6 update 1)
 fdo_pre0=rm -rf `pwd`/../feedback.profile `pwd`/SunWS_cache
 PASS1=-xprofile=collect:`pwd`/../feedback
 PASS2=-xprofile=use:`pwd`/../feedback
 176.gcc: -fast -xcrossfile -W2,-whole -Wc,-Qgsched-trace_late=1,-Qgsched-T4,-Qiselect-funcalign=64
          -xarch=v8plus -xprefetch
 252.eon: -fast -xcrossfile -xregs=syst -xsafe=mem -Qoption iropt -Mt500,-restrict_g,-restrict
          -Qoption cg -Qgsched-trace_late=1,-Qgsched-trace_spec_load=1,-Qgsched-T4 -xarch=v8plus
          -lmopt
 255.vortex: -fast -xsafe=mem -xcrossfile -W2,-Aheap,-reroll=1,-Aunroll,-Ms1,-Mt500,-Mr6000,-crit
             -Wc,-Qdepgraph-early_cross_call=1 -Wc,-Qiselect-funcalign=32 -Wc,-Qpeep-Sh0
             -xrestrict -xdepend -Wc,-Qgsched-trace_late=1,-Qgsched-T4 -xarch=v8plus

Portability:
 176.gcc: -Dalloca=__builtin_alloca -DHOST_WORDS_BIG_ENDIAN
 186.crafty: -DSUN 
 252.eon: -library=iostream,no%Cstd
 253.perlbmk: -DSPEC_CPU2000_SOLARIS -lnsl -lsocket
 254.gap: -DSYS_IS_USG -DSYS_HAS_TIME_PROTO -DSYS_HAS_SIGNAL_PROTO
          -DSYS_HAS_CALLOC_PROTO -DSYS_HAS_IOCTL_PROTO

Note:
 System Tunables: (for /etc/system)
  consistent_coloring=1, tune_t_fsflushr=86400, autoup=86400,
  shmsys:shminfo_shmmax=268435456, shmsys:shminfo_shmmni=1024, shmsys:shminfo_shmseg=1024
 (for /etc/opt/FJSVpnrm/lpg.conf)
  TSS=512M, SHMSEGSIZE=256M
 ONESTEP=yes was set for all baseline and peak benchmarks.
 Feedback directed optimization was used for all baseline and peak benchmarks.

Also used:
 -Xa (base and peak, except where noted) for 176.gcc (base only), 181.mcf, 186.crafty, 197.parser (peak only), 254.gap
 -dy (base) for all benchmarks except 252.eon, -dy (peak) for all except 176.gcc, 252.eon, 255. vortex
 -DWANT_STD_PROTO for 181.mcf (base and peak), -DCPU2000 for 186.crafty (base and peak),
 -DSUN -DCPU2000 for 197.parser (peak)
The flags listed above as "also used" were used for the actual compilation,
but they had no effect (-D flags), were the compiler's default (-Xa), or the compiler's
default when -Klargepage is used (-dy).
They are not necessary for result reproduction and can be omitted.


For questions about this result, please contact the tester.
For other inquiries, please contact webmaster@spec.org
Copyright © 1999-2004 Standard Performance Evaluation Corporation

First published at SPEC.org on 27-Mar-2001

Generated on Fri Mar 25 15:35:35 2005 by SPEC CPU2000 HTML formatter v1.01