SPEC Seal of Reviewal CINT2000 Result
Copyright © 1999-2004 Standard Performance Evaluation Corporation
SGI
SGI Origin 300 32X 600MHz R14000A
SPECint_rate2000 = 168    
SPECint_rate_base2000 = 164    
SPEC license # 4 Tested by: SGI Test date: May-2002 Hardware Avail: May-2002 Software Avail: Apr-2002
Graph Scale Benchmark Base
Copies
Base
Runtime
Base
Ratio
Copies Runtime Ratio
164.gzip base result bar (119)
164.gzip peak result bar (123)
164.gzip 32 436    119     32 424    123    
175.vpr base result bar (188)
175.vpr peak result bar (201)
175.vpr 32 277    188     32 258    201    
176.gcc base result bar (159)
176.gcc peak result bar (157)
176.gcc 32 258    159     32 260    157    
181.mcf base result bar (207)
181.mcf peak result bar (207)
181.mcf 32 322    207     32 322    207    
186.crafty base result bar (185)
186.crafty peak result bar (175)
186.crafty 32 200    185     32 213    175    
197.parser base result bar (148)
197.parser peak result bar (156)
197.parser 32 452    148     32 430    156    
252.eon base result bar (186)
252.eon peak result bar (203)
252.eon 32 260    186     32 237    203    
253.perlbmk base result bar (135)
253.perlbmk peak result bar (135)
253.perlbmk 32 495    135     32 496    135    
254.gap base result bar (107)
254.gap peak result bar (109)
254.gap 32 383    107     32 374    109    
255.vortex base result bar (176)
255.vortex peak result bar (179)
255.vortex 32 402    176     32 394    179    
256.bzip2 base result bar (170)
256.bzip2 peak result bar (181)
256.bzip2 32 328    170     32 307    181    
300.twolf base result bar (237)
300.twolf peak result bar (237)
300.twolf 32 469    237     32 469    237    
  SPECint_rate_base2000 164      
  SPECint_rate2000 168    

Hardware
Hardware Vendor: SGI
Model Name: SGI Origin 300 32X 600MHz R14000A
CPU: R14000
CPU MHz: 600
FPU: Integrated
CPU(s) enabled: 32 cores, 32 chips, 1 core/chip
CPU(s) orderable: 2-32
Parallel: No
Primary Cache: 32KBI + 32KBD on chip
Secondary Cache: 4MB(I+D) off chip
L3 Cache: N/A
Other Cache: N/A
Memory: 32 GB
Disk Subsystem: 1 x 18 GB FC, 4 x 18 GB FC (striped)
Other Hardware: None
Software
Operating System: IRIX 6.5.16f
Compiler: MIPSpro 7.3.1.3m C, C++
SCSL 1.4 Math Library
File System: xfs
System State: Single-user
Notes / Tuning Information
Baseline optimization flags (C and C++ use same flags):
   PASS1 : -Ofast=ip35 -IPA:use_intrinsic -fb_create /tmp/SPEC2000/FBDIR/base/$(EXEBASE) 
   PASS2 : -Ofast=ip35 -IPA:use_intrinsic -fb_opt /tmp/SPEC2000/FBDIR/base/$(EXEBASE) 
 Portability Flags:
   176.gcc: -Dalloca=__builtin_alloca -DMIPS -DHOST_WORDS_BIG_ENDIAN
   186.crafty: -DSGI
   253.perlbmk: -DSPEC_CPU2000_SGI -DI_FCNTL
   252.eon: -lm 
   254.gap: -DSYS_IS_USG -DSYS_HAS_TIME_PROTO -DSYS_HAS_SIGNAL_PROTO -DSYS_HAS_IOCTL_PROTO
            -DSYS_HAS_ANSI -DSYS_HAS_CALLOC_PROTO
   300.twolf: -DHAVE_SIGNED_CHAR
Peak optimization flags:
note:  all occurances of (FEEDBACK) below means compiled with a two-step process: 
   PASS1 = -fb_create /tmp/SPEC2000/FBDIR_peak/$(EXEBASE)
   PASS2 = -fb_opt /tmp/SPEC2000/FBDIR_peak/$(EXEBASE)
 164.gzip: -Ofast=ip35 -IPA:space=500:plimit=500 -lmalloc (FEEDBACK)
 175.vpr: -Ofast=ip35 -IPA:space=300:plimit=10000:callee_limit=5000:linear=on 
 .        -LNO:prefetch_ahead=2 -INLINE:aggressive=on 
 .        -OPT:Olimit=0:alias=disjoint:alias=restrict -CG:ld_latency=10 -lmalloc (FEEDBACK)
 181.mcf: basepeak=yes
 176.gcc: -Ofast=ip35 -CG:ld_latency=4 (FEEDBACK)
 186.crafty: -Ofast=ip35 -LNO:prefetch=0 -OPT:goto=off -CG:ld_latency=4 -lmalloc (FEEDBACK)
 197.parser: -Ofast=ip35 -IPA:min_hot=14 (FEEDBACK)
 252.eon: -Ofast=ip35 -LNO:prefetch=0 -LANG:exceptions=off -CG:ld_latency=4 -lmalloc -lm 
 .        (FEEDBACK)
 253.perlbmk: -Ofast=ip35 -IPA:use_intrinsic -Wl,-x (FEEDBACK)
 254.gap: -Ofast=ip35 -IPA:use_intrinsic -OPT:unroll_analysis=off:unroll_size=0:unroll_times_max=4
 . -OPT:alias=restrict:alias=disjoint -IPA:min_hot=7 -CG:ld_latency=8 -lmalloc (FEEDBACK)
 255.vortex: -Ofast=ip35 -IPA:use_intrinsic 
 .           -OPT:unroll_analysis=off:unroll_size=0:unroll_times_max=4 -LNO:opt=0 -CG:ld_latency=5 
 .           -IPA:min_hot=14 -TENV:X=4 -IPA:space=500:plimit=3600 -OPT:goto=off (FEEDBACK)
 256.bzip2: -Ofast=ip35 -IPA:min_hot=5:space=500:plimit=2900 -INLINE:aggressive=on (FEEDBACK)
 300.twolf: basepeak=yes
 The following O/S parameters were set:
   setenv PAGESIZE_DATA 4096 ; setenv PAGESIZE_TEXT 4096 ; setenv PAGESIZE_STACK 4096 
   systune -i ; percent_totalmem_4m_pages = 40 ; percent_totalmem_1m_pages = 7 
   systune -i ; percent_totalmem_256k_pages = 7 ; percent_totalmem_64k_pages = 7 
   systune -i ; r12k_bdiag = 0x4000000 ; gather_craylink_routerstats = 0
   limit stacksize 500000
 The following is done before building each benchmark that requires (FEEDBACK):  
 rm -rf /tmp/SPEC2000/FBDIR_peak/$baseexe ; mkdir -p /tmp/SPEC2000/FBDIR_peak/$baseexe 
 Jobs are submitted using dplace. Contents of the placement file submit.pf:   
 memories 1 in topology physical near $NODE
 threads 1
 run thread 0 on memory 0 using cpu $CPU
 The first disk mentioned in the Disk Subsystem is the system disk. A striped   
 XFS filesystem was created using the rest of the disks and the benchmark was  
 run on this.


For questions about this result, please contact the tester.
For other inquiries, please contact webmaster@spec.org
Copyright © 1999-2004 Standard Performance Evaluation Corporation

First published at SPEC.org on 18-Jun-2002

Generated on Fri Mar 25 16:02:28 2005 by SPEC CPU2000 HTML formatter v1.01