# Invocation command line: # /spec/cpu2000/bin/runspec -c config.measure_rate.cpu2000.cfg -u 4 ############################################################################ test_date = Sep-2003 machine_name = boulder hw_disk = 1x36GB SCSI, 15K RPM hw_memory = 16 GB mach = IH+.HPC.4cpu APAR = IY36772 LARGE_PAGES = 400 rate = 1 ncpus = 4 users = 4 include: run.reportable.cpu2000.inc # Fixed run-details. # ---- Begin inclusion of '/spec/cpu2000/config/run.reportable.cpu2000.inc' runlist = all action = validate iterations = 3 output_format = asc,config,pdf verbose = 6 reportable = 1 mean_anyway = 1 size = ref tune = base,peak ext = default env_vars = 1 hw_parallel = No company_name = IBM Corporation hw_vendor = IBM Corporation test_site = Austin, TX tester_name = IBM Austin # ---- End inclusion of '/spec/cpu2000/config/run.reportable.cpu2000.inc' include: software.nim00.cpu2000.inc # Software descriptions. # ---- Begin inclusion of '/spec/cpu2000/config/software.nim00.cpu2000.inc' default=default=default=default: sw_os = AIX 5L V5.2 sw_file = AIX/JFS sw_state = Multi-User sw_avail = May-2003 expand_notes = 1 env_vars = 1 license_num = 11 # Note that this is different from HPG licenses. #makeflags = -j2 #submit = let "MYCPU=\$SPECUSERNUM"; bindprocessor \$\$ \$MYCPU; $command int=default=default=default: sw_compiler10 = IBM C for AIX, Version 6.0 sw_compiler20 = IBM VisualAge C++ Professional for AIX, Version 6.0 fp=default=default=default: sw_compiler10 = IBM C for AIX, Version 6.0 sw_compiler20 = IBM XL FORTRAN for AIX, Version 8.1.1.0 sw_compiler30 = Other Software: ESSL 3.3.0.5, MASS 3.0 int=default=default=default: notes700 = notes710 = notes720 = Approved alternate-source file 252.eon.fmax_errno.src.alt.tar.gz notes730 = was used with 252.eon for POSIX-compatibility. notes740 = notes750 = C: IBM VAC++ invoked as cc except where noted as xlc notes760 = C++: IBM VAC++ invoked as xlC notes770 = fp=default=default=default: notes700 = notes710 = notes750 = C: IBM VAC++ invoked as xlc notes760 = Fortran 77 and 90: IBM XL Fortran for AIX invoked as xlf90. notes770 = default=default=default=default: notes800 = fpdr: Feedback directed program restructuring tool notes810 = /spec/cpu2000 filesystem mounted with no JFS log file I/O. notes820 = APAR IY $APAR was applied to AIX to enable new hardware support. notes830 = ulimits set to unlimited. notes840 = Large page mode and memory affinity were set as follows: notes850 = vmo -r -o lgpg_regions=$LARGE_PAGES -o lgpg_size=16777216 -o memory_affinity=1 notes860 = chuser capabilities=CAP_BYPASS_RAC_VMM,CAP_PROPAGATE \$USER notes870 = shutdown -r notes880 = export MEMORY_AFFINITY=MCM notes890 = # ########################### # Integer benchmarks ########################### # #=============================================================================== # How the compilers are called #=============================================================================== int=default=default=default: CC = /usr/vac/bin/cc CXX = /usr/vacpp/bin/xlC #=============================================================================== # Integer Portability Flags # no optimizations allowed here #=============================================================================== 176.gcc=default=default=default: EXTRA_CFLAGS=-ma -DHOST_WORDS_BIG_ENDIAN 186.crafty=default=default=default: EXTRA_CFLAGS=-DAIX 252.eon=default=default=default: srcalt=fmax_errno EXTRA_LDFLAGS=-I. -DNDEBUG 253.perlbmk=default=default=default: EXTRA_CFLAGS=-DSPEC_CPU2000_AIX 254.gap=default=default=default: EXTRA_CFLAGS=-DSYS_IS_BSD -DSYS_STRING_H -DSYS_HAS_TIME_PROTO -DSYS_HAS_MALLOC_PROTO -DSYS_HAS_CALLOC_PROTO 300.twolf=default=default=default: EXTRA_CFLAGS=-DHAVE_SIGNED_CHAR #=============================================================================== # Integer Portability Flag Notes #=============================================================================== int=default=default=default: notes100 = Portability Flags: notes110 = 176.gcc: -ma -DHOST_WORDS_BIG_ENDIAN notes120 = 186.crafty: -DAIX notes130 = 252.eon: srcalt=fmax_errno notes140 = -I. -DNDEBUG notes150 = 253.perlbmk: -DSPEC_CPU2000_AIX notes160 = 254.gap: -DSYS_IS_BSD -DSYS_STRING_H -DSYS_HAS_TIME_PROTO notes170 = -DSYS_HAS_MALLOC_PROTO -DSYS_HAS_CALLOC_PROTO notes180 = 300.twolf: -DHAVE_SIGNED_CHAR notes190 = #=============================================================================== # Integer Base Flags #=============================================================================== int=base=default=default: fdo_pre0 = /usr/vac/bin/cleanpdf PASS1_CFLAGS =-qpdf1 -O5 -blpdata -qalign=natural PASS1_LDCFLAGS =-qpdf1 -O5 -blpdata -qalign=natural PASS2_CFLAGS =-qpdf2 -O5 -blpdata -qalign=natural PASS2_LDCFLAGS =-qpdf2 -O5 -blpdata -qalign=natural notes200 = notes210 = Base Optimization Flags: notes220 = C: -qpdf1/pdf2 notes230 = -O5 -blpdata -qalign=natural 252.eon=base=default=default: fdo_pre0 = /usr/vac/bin/cleanpdf PASS1_CXXFLAGS =-qpdf1 -O5 -lhmu -qalign=natural PASS1_LDCXXFLAGS =-qpdf1 -O5 -lhmu -qalign=natural PASS2_CXXFLAGS =-qpdf2 -O5 -lhmu -qalign=natural PASS2_LDCXXFLAGS =-qpdf2 -O5 -lhmu -qalign=natural notes200 = notes210 = Base Optimization Flags: notes270 = C++: -qpdf1/pdf2 notes280 = -O5 -lhmu -qalign=natural notes290 = # ########################################### # Floating Point benchmarks ########################################### #=============================================================================== # How the compilers are called #=============================================================================== fp=default=default=default: CC = /usr/vac/bin/xlc FC = xlf90 F77 = xlf90 #=============================================================================== # Floating Point Portability Flags # no optimizations allowed here #=============================================================================== 168.wupwise=default=default=default: EXTRA_FFLAGS=-qfixed 171.swim=default=default=default: EXTRA_FFLAGS=-qfixed 172.mgrid=default=default=default: EXTRA_FFLAGS=-qfixed 173.applu=default=default=default: EXTRA_FFLAGS=-qfixed 178.galgel=default=default=default: EXTRA_FFLAGS=-qfixed -qsuffix=f=f90 187.facerec=default=default=default: EXTRA_FFLAGS=-qsuffix=f=f90 189.lucas=default=default=default: EXTRA_FFLAGS=-qsuffix=f=f90 191.fma3d=default=default=default: EXTRA_FFLAGS= -qsuffix=f=f90 200.sixtrack=default=default=default: EXTRA_FFLAGS=-qfixed 301.apsi=default=default=default: EXTRA_FFLAGS=-qfixed #=============================================================================== # FP Portability Flag Notes #=============================================================================== fp=default=default=default: notes100 = notes110 = Portability Flags notes120 = -qfixed used in: 168.wupwise, 171.swim, 172.mgrid, 173.applu, notes130 = 178.galgel, 200.sixtrack, 301.apsi notes140 = -qsuffix=f=f90 used in: 178.galgel, 187.facerec, 189.lucas, 191.fma3d notes150 = #=============================================================================== # Floating Point Base Flags #=============================================================================== fp=base=default=default: notes200 = notes210 = Base Optimization Flags: notes220 = C: -O5 -qalign=natural -blpdata -lmass notes230 = Fortran: -O5 -qalign=natural -blpdata -lmass COPTIMIZE = -O5 -qalign=natural -blpdata -lmass FOPTIMIZE = -O5 -qalign=natural -blpdata -lmass #=========================================================== # Integer peak optimization flags #=========================================================== int=peak=default=default: ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes300_1 = notes300_2 = Peak Optimization Flags 164.gzip=peak=default=default: ENV_SPECTEST = 164.gzip ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes310_1 = 164.gzip: basepeak = 1 notes310_2 = "CC = /usr/vac/bin/xlc" basepeak = 1 CC = /usr/vac/bin/xlc 175.vpr=peak=default=default: ENV_SPECTEST = 175.vpr ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes320_1 = 175.vpr: basepeak = 1 basepeak = 1 176.gcc=peak=default=default: ENV_SPECTEST = 176.gcc ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes330_1 = 176.gcc: basepeak = 1 basepeak = 1 181.mcf=peak=default=default: ENV_SPECTEST = 181.mcf ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes340_1 = 181.mcf: fdpr -v -R3 notes340_2 = -O5 -blpdata -D_ILS_MACROS COPTIMIZE =-O5 -blpdata CFLAGS =-D_ILS_MACROS fdo_run1 = fdpr -v -R3 -p $commandexe -x $command fdo_post1 = cp ${baseexe}.fdpr $baseexe 186.crafty=peak=default=default: ENV_SPECTEST = 186.crafty ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes350_1 = 186.crafty: -qpdf1/pdf2 notes350_2 = fdpr -v -R3 notes350_3 = -O3 -q64 fdo_pre0 = /usr/vac/bin/cleanpdf PASS1_CFLAGS =-qpdf1 -O3 -q64 PASS1_LDCFLAGS =-qpdf1 -O3 -q64 PASS2_CFLAGS =-qpdf2 -O3 -q64 PASS2_LDCFLAGS =-qpdf2 -O3 -q64 fdo_run2 = fdpr -v -R3 -p $commandexe -x $command fdo_post2 = cp ${baseexe}.fdpr $baseexe 197.parser=peak=default=default: ENV_SPECTEST = 197.parser ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes360_1 = 197.parser: -O5 -blpdata -D_ILS_MACROS COPTIMIZE =-O5 -blpdata CFLAGS =-D_ILS_MACROS 252.eon=peak=default=default: ENV_SPECTEST = 252.eon ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes370_1 = 252.eon: basepeak = 1 basepeak = 1 253.perlbmk=peak=default=default: ENV_SPECTEST = 253.perlbmk ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes380_1 = 253.perlbmk: -qpdf1/pdf2 notes380_2 = -O5 -lhmu -qalign=natural fdo_pre0 = /usr/vac/bin/cleanpdf PASS1_CFLAGS =-qpdf1 -O5 -lhmu -qalign=natural PASS1_LDCFLAGS =-qpdf1 -O5 -lhmu -qalign=natural PASS2_CFLAGS =-qpdf2 -O5 -lhmu -qalign=natural PASS2_LDCFLAGS =-qpdf2 -O5 -lhmu -qalign=natural 254.gap=peak=default=default: ENV_SPECTEST = 254.gap ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes390_1 = 254.gap: basepeak = 1 basepeak = 1 255.vortex=peak=default=default: ENV_SPECTEST = 255.vortex ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes400_1 = 255.vortex: -qpdf1/pdf2 notes400_2 = -O5 -lhmu -qalign=natural fdo_pre0 = /usr/vac/bin/cleanpdf PASS1_CFLAGS =-qpdf1 -O5 -lhmu -qalign=natural PASS1_LDCFLAGS =-qpdf1 -O5 -lhmu -qalign=natural PASS2_CFLAGS =-qpdf2 -O5 -lhmu -qalign=natural PASS2_LDCFLAGS =-qpdf2 -O5 -lhmu -qalign=natural 256.bzip2=peak=default=default: ENV_SPECTEST = 256.bzip2 ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes410_1 = 256.bzip2: -qpdf1/pdf2 notes410_2 = -O5 -blpdata -qarch=pwr3 -qtune=pwr3 fdo_pre0 = /usr/vac/bin/cleanpdf PASS1_CFLAGS =-qpdf1 -O5 -blpdata -qarch=pwr3 -qtune=pwr3 PASS1_LDCFLAGS =-qpdf1 -O5 -blpdata -qarch=pwr3 -qtune=pwr3 PASS2_CFLAGS =-qpdf2 -O5 -blpdata -qarch=pwr3 -qtune=pwr3 PASS2_LDCFLAGS =-qpdf2 -O5 -blpdata -qarch=pwr3 -qtune=pwr3 300.twolf=peak=default=default: ENV_SPECTEST = 300.twolf ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes420_1 = 300.twolf: -qpdf1/pdf2 notes420_2 = -O5 -lhmu -qalign=natural -blpdata notes420_3 = "CC = /usr/vac/bin/xlc" fdo_pre0 = /usr/vac/bin/cleanpdf PASS1_CFLAGS =-qpdf1 -O5 -lhmu -qalign=natural -blpdata PASS1_LDCFLAGS =-qpdf1 -O5 -lhmu -qalign=natural -blpdata PASS2_CFLAGS =-qpdf2 -O5 -lhmu -qalign=natural -blpdata PASS2_LDCFLAGS =-qpdf2 -O5 -lhmu -qalign=natural -blpdata CC = /usr/vac/bin/xlc ################################### # Floating Point benchmarks ################################### fp=peak=default=default: ENV_LOGNUM = ${lognum} ENV_TUNE = peak EXTRA_F77FLAGS =-qfixed notes300_1 = notes300_2 = Peak Optimization Flags 168.wupwise=peak=default=default: ENV_SPECTEST = 168.wupwise ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes310_1 = 168.wupwise: -O5 -qipa=partition=large F77OPTIMIZE = -O5 -qipa=partition=large 171.swim=peak=default=default: ENV_SPECTEST = 171.swim ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes320_1 = 171.swim: -O4 -q64 -blpdata F77OPTIMIZE = -O4 -q64 -blpdata 172.mgrid=peak=default=default: ENV_SPECTEST = 172.mgrid ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes330_1 = 172.mgrid: -O5 -qarch=pwr3 -qtune=pwr3 -blpdata F77OPTIMIZE = -O5 -qarch=pwr3 -qtune=pwr3 -blpdata 173.applu=peak=default=default: ENV_SPECTEST = 173.applu ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes340_1 = 173.applu: -O3 -qarch=pwr3 -qtune=pwr3 -lmass -qhot -blpdata F77OPTIMIZE = -O3 -qarch=pwr3 -qtune=pwr3 -lmass -qhot -blpdata 177.mesa=peak=default=default: ENV_SPECTEST = 177.mesa ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes350_1 = 177.mesa: -qpdf1/pdf2 notes350_2 = fdpr -v -R3 notes350_3 = -O3 -qarch=pwr3 -qtune=pwr3 -qipa=level=2 -qalign=natural -blpdata fdo_pre0 = /usr/vac/bin/cleanpdf PASS1_CFLAGS =-qpdf1 -O3 -qarch=pwr3 -qtune=pwr3 -qipa=level=2 -qalign=natural -blpdata PASS1_LDCFLAGS =-qpdf1 -O3 -qarch=pwr3 -qtune=pwr3 -qipa=level=2 -qalign=natural -blpdata PASS2_CFLAGS =-qpdf2 -O3 -qarch=pwr3 -qtune=pwr3 -qipa=level=2 -qalign=natural -blpdata PASS2_LDCFLAGS =-qpdf2 -O3 -qarch=pwr3 -qtune=pwr3 -qipa=level=2 -qalign=natural -blpdata fdo_run2 = fdpr -v -R3 -p $commandexe -x $command fdo_post2 = cp ${baseexe}.fdpr $baseexe 178.galgel=peak=default=default: ENV_SPECTEST = 178.galgel ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes360_1 = 178.galgel: -qpdf1/pdf2 notes360_2 = fdpr -v -R3 notes360_3 = -O5 -qalign=natural -qessl -lessl -lmass -blpdata fdo_pre0 = /usr/lpp/xlf/bin/cleanpdf PASS1_FFLAGS =-qpdf1 -O5 -qalign=natural -qessl -lessl -lmass -blpdata PASS1_LDFFLAGS =-qpdf1 -O5 -qalign=natural -qessl -lessl -lmass -blpdata PASS2_FFLAGS =-qpdf2 -O5 -qalign=natural -qessl -lessl -lmass -blpdata PASS2_LDFFLAGS =-qpdf2 -O5 -qalign=natural -qessl -lessl -lmass -blpdata fdo_run2 = fdpr -v -R3 -p $commandexe -x $command fdo_post2 = cp ${baseexe}.fdpr $baseexe 179.art=peak=default=default: ENV_SPECTEST = 179.art ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes380_1 = 179.art: -O4 -lhmu COPTIMIZE = -O4 -lhmu 183.equake=peak=default=default: ENV_SPECTEST = 183.equake ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes390_1 = 183.equake: basepeak = 1 basepeak = 1 187.facerec=peak=default=default: ENV_SPECTEST = 187.facerec ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes400_1 = 187.facerec: fdpr -v -R3 notes400_2 = -O5 -lmass -blpdata FOPTIMIZE =-O5 -lmass -blpdata fdo_run1 = fdpr -v -R3 -p $commandexe -x $command fdo_post1 = cp ${baseexe}.fdpr $baseexe 188.ammp=peak=default=default: ENV_SPECTEST = 188.ammp ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes410_1 = 188.ammp: basepeak = 1 basepeak = 1 189.lucas=peak=default=default: ENV_SPECTEST = 189.lucas ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes420_1 = 189.lucas: -O3 -q64 -blpdata FOPTIMIZE = -O3 -q64 -blpdata 191.fma3d=peak=default=default: ENV_SPECTEST = 191.fma3d ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes430_1 = 191.fma3d: -qpdf1/pdf2 notes430_2 = -O5 -qarch=pwr4 -qtune=pwr3 -lhmu -qalign=natural -blpdata fdo_pre0 = /usr/lpp/xlf/bin/cleanpdf PASS1_FFLAGS =-qpdf1 -O5 -qarch=pwr4 -qtune=pwr3 -lhmu -qalign=natural -blpdata PASS1_LDFFLAGS =-qpdf1 -O5 -qarch=pwr4 -qtune=pwr3 -lhmu -qalign=natural -blpdata PASS2_FFLAGS =-qpdf2 -O5 -qarch=pwr4 -qtune=pwr3 -lhmu -qalign=natural -blpdata PASS2_LDFFLAGS =-qpdf2 -O5 -qarch=pwr4 -qtune=pwr3 -lhmu -qalign=natural -blpdata 200.sixtrack=peak=default=default: ENV_SPECTEST = 200.sixtrack ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes440_1 = 200.sixtrack: -qpdf1/pdf2 notes440_2 = -O5 -lmass fdo_pre0 = /usr/lpp/xlf/bin/cleanpdf PASS1_F77FLAGS =-qpdf1 -O5 -lmass PASS1_LDF77FLAGS =-qpdf1 -O5 -lmass PASS2_F77FLAGS =-qpdf2 -O5 -lmass PASS2_LDF77FLAGS =-qpdf2 -O5 -lmass 301.apsi=peak=default=default: ENV_SPECTEST = 301.apsi ENV_LOGNUM = ${lognum} ENV_TUNE = peak notes450_1 = 301.apsi: -O5 -qarch=pwr4 -qtune=pwr3 -blpdata F77OPTIMIZE = -O5 -qarch=pwr4 -qtune=pwr3 -blpdata # ---- End inclusion of '/spec/cpu2000/config/software.nim00.cpu2000.inc' include: rs6000.inc # Hardware descriptions. # ---- Begin inclusion of '/spec/cpu2000/config/rs6000.inc' default=default=default=H+.1_of_32cpu: # Details of the 1700 MHz Regatta-H+ System. # This is sold as an SMP system; for the purposes of the # 1-way measurements we present it as a single-CPU system. # Note that start from a 32-way here, deconfiguring 31 # processors, as opposed to starting with an 8-way and # only having to deconfigure 7. hw_model = IBM eServer pSeries 690 Turbo (1700 MHz, 1 CPU) hw_avail = May-2003 hw_cpu = POWER4+ hw_cpu_mhz = 1700 hw_ncpu = 1 hw_ncpuorder = 8,16,24,32 hw_fpu = Integrated hw_pcache = 64KBI+32KBD (on chip) hw_scache = 1536KB unified (on chip) hw_tcache = 128MB unified (off-chip) per MCM, 4 MCMs in SUT hw_ocache = None hw_other = None rate = 0 # "speed" run, for 1 CPU. users = 1 # For SPEC/CPU "rate" run ENV_OMP_NUM_THREADS = 1 # For SPEC/OMP "speed" run sw_threads = 1 notes900 = notes910 = MCM: Acronym for "Multi-Chip Module" notes920 = SUT: Acronym for "System Under Test" notes930 = notes940 = 31 processors were deconfigured through the configuration menu. notes950 = 6 memory-cards were deconfigured through the configuration menu. notes960 = default=default=default=H+: # Details of the 1700 MHz Regatta-H+ System. hw_model = IBM eServer pSeries 690 Turbo (1700 MHz, 32 CPU) hw_avail = May-2003 hw_cpu = POWER4+ hw_cpu_mhz = 1700 hw_ncpu = 32 hw_ncpuorder = 8,16,24,32 hw_fpu = Integrated hw_pcache = 64KBI+32KBD (on chip) per CPU (2 CPU per chip) hw_scache = 1536KB unified, shared (on chip) per chip hw_tcache = 128MB unified (off-chip) per MCM, 4 MCMs in SUT (4 chips per MCM) hw_ocache = None hw_other = None rate = 1 users = 32 # For SPEC/CPU "rate" run ENV_OMP_NUM_THREADS = 32 # For SPEC/OMP "speed" run sw_threads = 32 notes900 = notes910 = MCM: Acronym for "Multi-Chip Module" notes920 = SUT: Acronym for "System Under Test" notes930 = default=default=default=p670+.1_of_16cpu: # Details of the 1500 MHz Regatta-p670+ System. # This is sold as an SMP system; for the purposes of the # 1-way measurements we present it as a single-CPU system. # Note that start from a 16-way here, deconfiguring 15 # processors, as opposed to starting with a 4-way and # only having to deconfigure 3. hw_model = IBM eServer pSeries 670 (1500 MHz, 1 CPU) hw_avail = May-2003 hw_cpu = POWER4+ hw_cpu_mhz = 1500 hw_ncpu = 1 hw_ncpuorder = 4,8,16 hw_fpu = Integrated hw_pcache = 64KBI+32KBD (on chip) hw_scache = 1536KB shared (on chip) hw_tcache = 128MB unified (off-chip) per MCM, 2 MCMs in SUT hw_ocache = None hw_other = None rate = 0 # "speed" run, for 1 CPU. users = 1 # For SPEC/CPU "rate" run ENV_OMP_NUM_THREADS = 1 # For SPEC/OMP "speed" run sw_threads = 1 notes900 = notes910 = MCM: Acronym for "Multi-Chip Module" notes920 = SUT: Acronym for "System Under Test" notes930 = notes940 = 15 processors were deconfigured through the configuration menu. notes950 = 2 memory-cards were deconfigured through the configuration menu. notes960 = default=default=default=p670+: # Details of the 1500 MHz Regatta-p670+ System. hw_model = IBM eServer pSeries 670 (1500 MHz, 16 CPU) hw_avail = May-2003 hw_cpu = POWER4+ hw_cpu_mhz = 1700 hw_ncpu = 16 hw_ncpuorder = 4,8,16 hw_fpu = Integrated hw_pcache = 64KBI+32KBD (on chip) per CPU (2 CPU per chip) hw_scache = 1536KB unified, shared (on chip) per chip hw_tcache = 128MB unified (off-chip) per MCM, 2 MCMs in SUT (4 chips per MCM) hw_ocache = None hw_other = None rate = 1 users = 16 # For SPEC/CPU "rate" run ENV_OMP_NUM_THREADS = 16 # For SPEC/OMP "speed" run sw_threads = 16 notes900 = notes910 = MCM: Acronym for "Multi-Chip Module" notes920 = SUT: Acronym for "System Under Test" notes930 = default=default=default=IH+.1cpu: # Details of the 1500 MHz Regatta-IH+ System. # This is sold as an SMP system; for the purposes of the # 1-way measurements we present it as a single-CPU system. hw_model = IBM eServer pSeries 655 (1500 MHz, 1 CPU) hw_avail = Jul-2003 hw_cpu = POWER4+ hw_cpu_mhz = 1500 hw_ncpu = 1 hw_ncpuorder = 8 hw_fpu = Integrated hw_pcache = 64KBI+32KBD (on chip) hw_scache = 1536KB shared (on chip) hw_tcache = 128MB unified (off-chip) per MCM, 1 MCM in SUT hw_ocache = None hw_other = None rate = 0 # "speed" run, for 1 CPU. users = 1 # For SPEC/CPU "rate" run ENV_OMP_NUM_THREADS = 1 # For SPEC/OMP "speed" run sw_threads = 1 notes900 = notes910 = MCM: Acronym for "Multi-Chip Module" notes920 = SUT: Acronym for "System Under Test" notes930 = notes940 = 7 processors were deconfigured through the configuration menu. notes950 = default=default=default=IH+.HPC.1cpu: # Details of the 1700 MHz Regatta-IH+ System. # This is sold as an SMP system; for the purposes of the # 1-way measurements we present it as a single-CPU system. hw_model = IBM eServer pSeries 655 (1700 MHz, 1 CPU) hw_avail = Jul-2003 hw_cpu = POWER4+ hw_cpu_mhz = 1700 hw_ncpu = 1 hw_ncpuorder = 4 hw_fpu = Integrated hw_pcache = 64KBI+32KBD (on chip) hw_scache = 1536KB unified (on chip) hw_tcache = 128MB unified (off-chip) per MCM, 1 MCM in SUT hw_ocache = None hw_other = None rate = 0 # "speed" run, for 1 CPU. users = 1 # For SPEC/CPU "rate" run ENV_OMP_NUM_THREADS = 1 # For SPEC/OMP "speed" run sw_threads = 1 notes900 = notes910 = MCM: Acronym for "Multi-Chip Module" notes920 = SUT: Acronym for "System Under Test" notes930 = notes940 = 3 processors were deconfigured through the configuration menu. notes950 = default=default=default=IH+.8cpu: # Details of the 1500 MHz Regatta-IH+ System. hw_model = IBM eServer pSeries 655 (1500 MHz, 8 CPU) hw_avail = Jul-2003 hw_cpu = POWER4+ hw_cpu_mhz = 1500 hw_ncpu = 8 hw_ncpuorder = 8 hw_fpu = Integrated hw_pcache = 64KBI+32KBD (on chip) per CPU (2 CPU per chip) hw_scache = 1536KB unified, shared (on chip) per chip hw_tcache = 128MB unified (off-chip) per MCM, 1 MCM in SUT (4 chips per MCM) hw_ocache = None hw_other = None rate = 1 users = 8 # For SPEC/CPU "rate" run ENV_OMP_NUM_THREADS = 8 # For SPEC/OMP "speed" run sw_threads = 8 notes900 = notes910 = MCM: Acronym for "Multi-Chip Module" notes920 = SUT: Acronym for "System Under Test" notes930 = default=default=default=IH+.HPC.4cpu: # Details of the 1700 MHz Regatta-IH+ System. hw_model = IBM eServer pSeries 655 (1700 MHz, 4 CPU) hw_avail = Jul-2003 hw_cpu = POWER4+ hw_cpu_mhz = 1700 hw_ncpu = 4 hw_ncpuorder = 4 hw_fpu = Integrated hw_pcache = 64KBI+32KBD (on chip) per CPU (1 CPU per chip) hw_scache = 1536KB unified, shared (on chip) per chip hw_tcache = 128MB unified (off-chip) per MCM, 1 MCM in SUT (4 chips per MCM) hw_ocache = None hw_other = None rate = 1 users = 4 # For SPEC/CPU "rate" run ENV_OMP_NUM_THREADS = 4 # For SPEC/OMP "speed" run sw_threads = 4 notes900 = notes910 = MCM: Acronym for "Multi-Chip Module" notes920 = SUT: Acronym for "System Under Test" notes930 = default=default=default=MI_GQ.1cpu.1450MHz: # Details of the 1450 MHz Regatta-MI/GQ Server/Workstation. # This is sold in a variety of combinations; for the purposes of # the 1-way measurements we present it as a single-CPU system. hw_model = IBM eServer pSeries 650 Model 6M2 (1450 MHz, 1 CPU) hw_avail = Dec-2002 hw_cpu = POWER4+ hw_cpu_mhz = 1450 hw_ncpu = 1 hw_ncpuorder = 2,4,6,8 hw_fpu = Integrated hw_pcache = 64KBI+32KBD (on chip) hw_scache = 1536KB unified (on chip) hw_tcache = 8MB unified (off-chip) per SCM, 1 SCM in SUT hw_ocache = None hw_other = None rate = 1 users = 4 # For SPEC/CPU "rate" run ENV_OMP_NUM_THREADS = 4 # For SPEC/OMP "speed" run sw_threads = 4 notes900 = notes910 = SCM: Acronym for "Single-Chip Module" notes920 = SUT: Acronym for "System Under Test" notes930 = notes940 = The 1-way pSeries 650 machine contains 1 CPU board. notes950 = 1 processor was deconfigured through the configuration menu. notes990 = default=default=default=MI_GQ.8cpu.1450MHz: # Details of the 1450 MHz Regatta-MI/GQ Server/Workstation. hw_model = IBM eServer pSeries 650 Model 6M2 (1450 MHz, 8 CPU) hw_avail = Dec-2002 hw_cpu = POWER4+ hw_cpu_mhz = 1450 hw_ncpu = 8 hw_ncpuorder = 2,4,6,8 hw_fpu = Integrated hw_pcache = 64KBI+32KBD (on chip) per CPU (2 CPU per chip) hw_scache = 1536KB unified (on chip) hw_tcache = 8MB unified (off-chip) per SCM, 4 SCMs in SUT hw_ocache = None hw_other = None rate = 1 users = 8 # For SPEC/CPU "rate" run ENV_OMP_NUM_THREADS = 8 # For SPEC/OMP "speed" run sw_threads = 8 notes900 = notes910 = SCM: Acronym for "Single-Chip Module" notes920 = SUT: Acronym for "System Under Test" notes990 = default=default=default=LER_GQ.1cpu.1200MHz: # Details of the 1200 MHz Regatta-LER/GQ Server/Workstation. # Note that the 6C4 & 6E4 are identical; we just edit the # rawfile and resubmit for each one. # This is sold in a variety of combinations; for the purposes of # the 1-way measurements we present it as a single-CPU system. hw_model = IBM eServer pSeries 630 Model 6C4 (1200 MHz, 1 CPU) hw_avail = Apr-2003 hw_cpu = POWER4+ hw_cpu_mhz = 1200 hw_ncpu = 1 hw_ncpuorder = 1,2,4 hw_fpu = Integrated hw_pcache = 64KBI+32KBD (on chip) hw_scache = 1536KB unified (on chip) hw_tcache = 8MB unified (off-chip) per SCM, 1 SCM in SUT hw_ocache = None hw_other = None rate = 0 # "speed" run, for 1 CPU. users = 1 # For SPEC/CPU "rate" run ENV_OMP_NUM_THREADS = 1 # For SPEC/OMP "speed" run sw_threads = 1 notes900 = notes910 = SCM: Acronym for "Single-Chip Module" notes920 = SUT: Acronym for "System Under Test" notes930 = notes940 = IBM eServer pSeries 615 Model 6C3 (rack-mount server) and pSeries notes950 = 615 Model 6E3 (deskside server) are electronically equivalent. notes960 = notes970 = The 1-way pSeries 630 machine contains 1 CPU board. notes980 = 1 processor was deconfigured through the configuration menu. notes990 = default=default=default=LER_GQ.2cpu.1200MHz: # Details of the 1200 MHz Regatta-LER/GQ Server/Workstation. # Note that the 6C4 & 6E4 are identical; we just edit the # rawfile and resubmit for each one. # This is a 2-way "Turbo" arrangement. hw_model = IBM eServer pSeries 630 Model 6C4 (1200 MHz, 2 CPU) hw_avail = Apr-2003 hw_cpu = POWER4+ hw_cpu_mhz = 1200 hw_ncpu = 2 hw_ncpuorder = 1,2,4 hw_fpu = Integrated hw_pcache = 64KBI+32KBD (on chip) per CPU (2 CPU per chip) hw_scache = 1536KB unified (on chip) hw_tcache = 8MB unified (off-chip) per SCM, 1 SCM in SUT hw_ocache = None hw_other = None rate = 1 users = 2 # For SPEC/CPU "rate" run ENV_OMP_NUM_THREADS = 2 # For SPEC/OMP "speed" run sw_threads = 2 notes900 = notes910 = SCM: Acronym for "Single-Chip Module" notes920 = SUT: Acronym for "System Under Test" notes930 = notes940 = IBM eServer pSeries 615 Model 6C3 (rack-mount server) and pSeries notes950 = 615 Model 6E3 (deskside server) are electronically equivalent. notes960 = notes970 = The 1-way pSeries 630 machine contains 1 CPU board. notes990 = default=default=default=LER_GQ.4cpu.1200MHz: # Details of the 1200 MHz Regatta-LER/GQ Server/Workstation. # Note that the 6C4 & 6E4 are identical; we just edit the # rawfile and resubmit for each one. hw_model = IBM eServer pSeries 630 Model 6C4 (1200 MHz, 4 CPU) hw_avail = Apr-2003 hw_cpu = POWER4+ hw_cpu_mhz = 1200 hw_ncpu = 4 hw_ncpuorder = 1,2,4 hw_fpu = Integrated hw_pcache = 64KBI+32KBD (on chip) per CPU (2 CPU per chip) hw_scache = 1536KB unified (on chip) hw_tcache = 8MB unified (off-chip) per SCM, 2 SCMs in SUT hw_ocache = None hw_other = None rate = 1 users = 4 # For SPEC/CPU "rate" run ENV_OMP_NUM_THREADS = 4 # For SPEC/OMP "speed" run sw_threads = 4 notes900 = notes910 = SCM: Acronym for "Single-Chip Module" notes920 = SUT: Acronym for "System Under Test" notes930 = notes940 = IBM eServer pSeries 615 Model 6C3 (rack-mount server) and pSeries notes950 = 615 Model 6E3 (deskside server) are electronically equivalent. notes990 = default=default=default=LER_GQ.1cpu.1450MHz: # Details of the 1450 MHz Regatta-LER/GQ Server/Workstation. # Note that the 6C4 & 6E4 are identical; we just edit the # rawfile and resubmit for each one. # This is sold in a variety of combinations; for the purposes of # the 1-way measurements we present it as a single-CPU system. hw_model = IBM eServer pSeries 630 Model 6C4 (1450 MHz, 1 CPU) hw_avail = Feb-2003 hw_cpu = POWER4+ hw_cpu_mhz = 1450 hw_ncpu = 1 hw_ncpuorder = 1,2,4 hw_fpu = Integrated hw_pcache = 64KBI+32KBD (on chip) hw_scache = 1536KB unified (on chip) hw_tcache = 8MB unified (off-chip) per SCM, 1 SCM in SUT hw_ocache = None hw_other = None rate = 0 # "speed" run, for 1 CPU. users = 1 # For SPEC/CPU "rate" run ENV_OMP_NUM_THREADS = 1 # For SPEC/OMP "speed" run sw_threads = 1 notes900 = notes910 = SCM: Acronym for "Single-Chip Module" notes920 = SUT: Acronym for "System Under Test" notes930 = notes940 = IBM eServer pSeries 615 Model 6C3 (rack-mount server) and pSeries notes950 = 615 Model 6E3 (deskside server) are electronically equivalent. notes960 = notes970 = The 1-way pSeries 630 machine contains 1 CPU board. notes980 = 1 processor was deconfigured through the configuration menu. notes990 = default=default=default=LER_GQ.2cpu.1450MHz: # Details of the 1450 MHz Regatta-LER/GQ Server/Workstation. # Note that the 6C4 & 6E4 are identical; we just edit the # rawfile and resubmit for each one. # This is a 2-way "Turbo" arrangement. hw_model = IBM eServer pSeries 630 Model 6C4 (1450 MHz, 2 CPU) hw_avail = Feb-2003 hw_cpu = POWER4+ hw_cpu_mhz = 1450 hw_ncpu = 2 hw_ncpuorder = 1,2,4 hw_fpu = Integrated hw_pcache = 64KBI+32KBD (on chip) per CPU (2 CPU per chip) hw_scache = 1536KB unified (on chip) hw_tcache = 8MB unified (off-chip) per SCM, 1 SCM in SUT hw_ocache = None hw_other = None rate = 1 users = 2 # For SPEC/CPU "rate" run ENV_OMP_NUM_THREADS = 2 # For SPEC/OMP "speed" run sw_threads = 2 notes900 = notes910 = SCM: Acronym for "Single-Chip Module" notes920 = SUT: Acronym for "System Under Test" notes930 = notes940 = IBM eServer pSeries 615 Model 6C3 (rack-mount server) and pSeries notes950 = 615 Model 6E3 (deskside server) are electronically equivalent. notes960 = notes970 = The 1-way pSeries 630 machine contains 1 CPU board. notes990 = default=default=default=LER_GQ.4cpu.1450MHz: # Details of the 1450 MHz Regatta-LER/GQ Server/Workstation. # Note that the 6C4 & 6E4 are identical; we just edit the # rawfile and resubmit for each one. hw_model = IBM eServer pSeries 630 Model 6C4 (1450 MHz, 4 CPU) hw_avail = Feb-2003 hw_cpu = POWER4+ hw_cpu_mhz = 1450 hw_ncpu = 4 hw_ncpuorder = 1,2,4 hw_fpu = Integrated hw_pcache = 64KBI+32KBD (on chip) per CPU (2 CPU per chip) hw_scache = 1536KB unified (on chip) hw_tcache = 8MB unified (off-chip) per SCM, 2 SCMs in SUT hw_ocache = None hw_other = None rate = 1 users = 4 # For SPEC/CPU "rate" run ENV_OMP_NUM_THREADS = 4 # For SPEC/OMP "speed" run sw_threads = 4 notes900 = notes910 = SCM: Acronym for "Single-Chip Module" notes920 = SUT: Acronym for "System Under Test" notes930 = notes940 = IBM eServer pSeries 615 Model 6C3 (rack-mount server) and pSeries notes950 = 615 Model 6E3 (deskside server) are electronically equivalent. notes990 = default=default=default=E4.1000MHz: # Details of the 1000 MHz Regatta-E4 Workstation. # This is only sold as a single-CPU system. hw_model = IBM IntelliStation POWER 275 Workstation (1000 MHz, 1 CPU) hw_avail = Jul-2003 hw_cpu = POWER4+ hw_cpu_mhz = 1000 hw_ncpu = 1 hw_ncpuorder = 1 hw_fpu = Integrated hw_pcache = 64KBI+32KBD (on chip) hw_scache = 1536KB shared (on chip) hw_tcache = 8MB unified (off-chip) per DCM, 1 DCM in SUT hw_ocache = None hw_other = None rate = 0 # "speed" run, for 1 CPU. users = 1 # For SPEC/CPU "rate" run ENV_OMP_NUM_THREADS = 1 # For SPEC/OMP "speed" run sw_threads = 1 notes900 = notes910 = DCM: Acronym for "Dual-Chip Module" notes920 = SUT: Acronym for "System Under Test" notes930 = default=default=default=E4.1cpu.1200MHz: # Details of the 1200 MHz Regatta-E4 Workstation. # This is sold as a single- or dual- CPU system; # for the 1-way measurements we present it as a # single-CPU system. hw_model = IBM pSeries 615 Model 6C3 (1200 MHz, 1 CPU) hw_avail = Jul-2003 hw_cpu = POWER4+ hw_cpu_mhz = 1200 hw_ncpu = 1 hw_ncpuorder = 1,2 hw_fpu = Integrated hw_pcache = 64KBI+32KBD (on chip) hw_scache = 1536KB shared (on chip) hw_tcache = 8MB unified (off-chip) per DCM, 1 DCM in SUT hw_ocache = None hw_other = None rate = 0 # "speed" run, for 1 CPU. users = 1 # For SPEC/CPU "rate" run ENV_OMP_NUM_THREADS = 1 # For SPEC/OMP "speed" run sw_threads = 1 notes900 = notes910 = DCM: Acronym for "Dual-Chip Module" notes920 = SUT: Acronym for "System Under Test" notes930 = notes940 = IBM eServer pSeries 615 Model 6C3 (rack-mount server) and pSeries notes950 = 615 Model 6E3 (deskside server) are electronically equivalent. notes960 = 1 processor was deconfigured through the configuration menu. notes970 = default=default=default=E4.2cpu.1200MHz: # Details of the 1200 MHz Regatta-E4 Workstation. # This is sold as a single- or dual- CPU system; # here is the dual-CPU description. hw_model = IBM pSeries 615 Model 6C3 (1200 MHz, 2 CPU) hw_avail = Jul-2003 hw_cpu = POWER4+ hw_cpu_mhz = 1200 hw_ncpu = 2 hw_ncpuorder = 1,2 hw_fpu = Integrated hw_pcache = 64KBI+32KBD (on chip) per CPU (2 CPUs per chip) hw_scache = 1536KB unified, shared (on chip) hw_tcache = 8MB unified (off-chip) per DCM, 1 DCM in SUT hw_ocache = None hw_other = None rate = 1 users = 2 # For SPEC/CPU "rate" run ENV_OMP_NUM_THREADS = 2 # For SPEC/OMP "speed" run sw_threads = 2 notes900 = notes910 = DCM: Acronym for "Dual-Chip Module" notes920 = SUT: Acronym for "System Under Test" notes930 = notes940 = IBM eServer pSeries 615 Model 6C3 (rack-mount server) and pSeries notes950 = 615 Model 6E3 (deskside server) are electronically equivalent. notes970 = default=default=default=E4.6C3.1cpu.1450MHz: # Details of the 1450 MHz Regatta-E4 Workstation. # This is sold as a single- or dual- CPU system; # for the 1-way measurements we present it as a # single-CPU system. hw_model = IBM pSeries 615 Model 6C3 (1450 MHz, 1 CPU) hw_avail = Jul-2003 hw_cpu = POWER4+ hw_cpu_mhz = 1450 hw_ncpu = 1 hw_ncpuorder = 1,2 hw_fpu = Integrated hw_pcache = 64KBI+32KBD (on chip) hw_scache = 1536KB shared (on chip) hw_tcache = 8MB unified (off-chip) per DCM, 1 DCM in SUT hw_ocache = None hw_other = None rate = 0 # "speed" run, for 1 CPU. users = 1 # For SPEC/CPU "rate" run ENV_OMP_NUM_THREADS = 1 # For SPEC/OMP "speed" run sw_threads = 1 notes900 = notes910 = DCM: Acronym for "Dual-Chip Module" notes920 = SUT: Acronym for "System Under Test" notes930 = notes960 = 1 processor was deconfigured through the configuration menu. notes970 = default=default=default=E4.6C3.2cpu.1450MHz: # Details of the 1450 MHz Regatta-E4 Workstation. # This is sold as a single- or dual- CPU system; # here is the dual-CPU description. hw_model = IBM pSeries 615 Model 6C3 (1450 MHz, 2 CPU) hw_avail = Jul-2003 hw_cpu = POWER4+ hw_cpu_mhz = 1450 hw_ncpu = 2 hw_ncpuorder = 1,2 hw_fpu = Integrated hw_pcache = 64KBI+32KBD (on chip) per CPU (2 CPUs per chip) hw_scache = 1536KB unified, shared (on chip) hw_tcache = 8MB unified (off-chip) per DCM, 1 DCM in SUT hw_ocache = None hw_other = None rate = 1 users = 2 # For SPEC/CPU "rate" run ENV_OMP_NUM_THREADS = 2 # For SPEC/OMP "speed" run sw_threads = 2 notes900 = notes910 = DCM: Acronym for "Dual-Chip Module" notes920 = SUT: Acronym for "System Under Test" notes930 = # ---- End inclusion of '/spec/cpu2000/config/rs6000.inc'