CPU2006 license: | 11 | Test date: | Jun-2011 |
---|---|---|---|
Test sponsor: | IBM Corporation | Hardware Availability: | Feb-2011 |
Tested by: | IBM Corporation | Software Availability: | Jan-2011 |
Hardware | |
---|---|
CPU Name: | Intel Xeon E5606 |
CPU Characteristics: | |
CPU MHz: | 2133 |
FPU: | Integrated |
CPU(s) enabled: | 8 cores, 2 chips, 4 cores/chip |
CPU(s) orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 8 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 48 GB (12 x 4 GB 2Rx8 PC3-10600R-9, ECC, running at 1066 MHz) |
Disk Subsystem: | 2 x 50 GB SATA, SSD, RAID 0 |
Other Hardware: | None |
Software | |
---|---|
Operating System: | SUSE Linux Enterprise Server 11 SP1 (x86_64), Kernel 2.6.32.12-0.7-default |
Compiler: | Intel C++ Compiler XE for applications running on IA-32 Version 12.0.1.116 Build 20101116 |
Auto Parallel: | No |
File System: | ext3 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V9.01 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 8 | 636 | 123 | 634 | 123 | 636 | 123 | 8 | 520 | 150 | 518 | 151 | 519 | 151 |
401.bzip2 | 8 | 961 | 80.4 | 959 | 80.5 | 960 | 80.4 | 8 | 843 | 91.6 | 845 | 91.4 | 842 | 91.7 |
403.gcc | 8 | 548 | 118 | 546 | 118 | 553 | 117 | 8 | 548 | 118 | 546 | 118 | 553 | 117 |
429.mcf | 8 | 378 | 193 | 374 | 195 | 374 | 195 | 8 | 360 | 203 | 354 | 206 | 352 | 207 |
445.gobmk | 8 | 687 | 122 | 684 | 123 | 683 | 123 | 8 | 665 | 126 | 666 | 126 | 663 | 127 |
456.hmmer | 8 | 362 | 206 | 363 | 206 | 365 | 205 | 8 | 303 | 246 | 304 | 246 | 303 | 246 |
458.sjeng | 8 | 757 | 128 | 756 | 128 | 756 | 128 | 8 | 693 | 140 | 693 | 140 | 693 | 140 |
462.libquantum | 8 | 223 | 742 | 223 | 742 | 225 | 736 | 8 | 223 | 742 | 223 | 742 | 225 | 736 |
464.h264ref | 8 | 838 | 211 | 838 | 211 | 838 | 211 | 8 | 827 | 214 | 827 | 214 | 825 | 215 |
471.omnetpp | 8 | 500 | 100 | 500 | 99.9 | 500 | 100 | 8 | 462 | 108 | 459 | 109 | 460 | 109 |
473.astar | 8 | 615 | 91.3 | 613 | 91.5 | 616 | 91.2 | 8 | 615 | 91.3 | 613 | 91.5 | 616 | 91.2 |
483.xalancbmk | 8 | 354 | 156 | 354 | 156 | 354 | 156 | 8 | 354 | 156 | 354 | 156 | 354 | 156 |
The config file option 'submit' was used. numactl was used to bind copies to the cores
'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run 'nodev /mnt/hugepages hugetlbfs nodev 0 0' added to /etc/fstab echo 7200 > /proc/sys/vm/nr_hugepages export HUGETLB_MORECORE=yes export LD_PRELOAD=/usr/lib64/libhugetlbfs.so
Load Default BIOS Settings and then change the following Power C-states enabled Demand Scrub disabled
Binaries compiled on RHEL5.5
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -B /usr/share/libhugetlbfs/ -Wl,-hugetlbfs-link=BDT |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -Wl,-z,muldefs -L/smartheap -lsmartheap -B /usr/share/libhugetlbfs/ -Wl,-hugetlbfs-link=BDT |
icc -m32 | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
471.omnetpp: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/smartheap -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |