CPU2006 license: | 9001 | Test date: | Jan-2012 |
---|---|---|---|
Test sponsor: | Itautec | Hardware Availability: | Jul-2011 |
Tested by: | Itautec | Software Availability: | Dec-2011 |
Hardware | |
---|---|
CPU Name: | Intel Xeon E5630 |
CPU Characteristics: | Intel Turbo Boost Technology up to 2.80 GHz |
CPU MHz: | 2533 |
FPU: | Integrated |
CPU(s) enabled: | 8 cores, 2 chips, 4 cores/chip, 2 threads/core |
CPU(s) orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 12 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 48 GB (12 x 4 GB 2Rx4 PC3-10600R-9, ECC) |
Disk Subsystem: | 2 x 146 GB, SAS, 15000 RPM, RAID 0 |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server Release 6.2, 2.6.32-220.el6.x86_64 |
Compiler: | C/C++: Version 12.1.0 of Intel Compiler XE Build 20111011 |
Auto Parallel: | No |
File System: | ext4 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V8.1 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 16 | 849 | 184 | 854 | 183 | 847 | 185 | 16 | 720 | 217 | 723 | 216 | 723 | 216 |
401.bzip2 | 16 | 1079 | 143 | 1078 | 143 | 1078 | 143 | 16 | 1025 | 151 | 1042 | 148 | 1027 | 150 |
403.gcc | 16 | 725 | 178 | 722 | 178 | 719 | 179 | 16 | 725 | 178 | 730 | 176 | 725 | 178 |
429.mcf | 16 | 389 | 376 | 389 | 375 | 389 | 375 | 16 | 389 | 376 | 389 | 375 | 389 | 375 |
445.gobmk | 16 | 834 | 201 | 834 | 201 | 833 | 201 | 16 | 789 | 213 | 789 | 213 | 790 | 213 |
456.hmmer | 16 | 524 | 285 | 529 | 282 | 526 | 284 | 8 | 240 | 310 | 240 | 311 | 240 | 311 |
458.sjeng | 16 | 978 | 198 | 977 | 198 | 978 | 198 | 16 | 919 | 211 | 919 | 211 | 917 | 211 |
462.libquantum | 16 | 224 | 1480 | 224 | 1480 | 224 | 1480 | 16 | 224 | 1480 | 224 | 1480 | 224 | 1480 |
464.h264ref | 16 | 1239 | 286 | 1292 | 274 | 1258 | 282 | 16 | 1256 | 282 | 1237 | 286 | 1231 | 288 |
471.omnetpp | 16 | 586 | 171 | 586 | 171 | 585 | 171 | 16 | 542 | 185 | 542 | 185 | 541 | 185 |
473.astar | 16 | 750 | 150 | 750 | 150 | 749 | 150 | 16 | 750 | 150 | 750 | 150 | 749 | 150 |
483.xalancbmk | 16 | 395 | 279 | 397 | 278 | 396 | 279 | 16 | 395 | 279 | 397 | 278 | 396 | 279 |
The config file option 'submit' was used. numactl was used to bind copies to the cores
'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run. Large pages were not enabled for this run
Data Reuse disabled in BIOS. DCU Prefetcher disabled in BIOS.
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 -Wl,-z,muldefs -L/home/rcaneca/sh/SmartHeap_8.1/lib -lsmartheap |
icc -m32 | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
471.omnetpp: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/home/rcaneca/sh/SmartHeap_8.1/lib -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |