SPEC CPU2017 Flag Description - Platform settings

Operating System Tuning Parameters

sched_cfs_bandwidth_slice_us
When Completely Fair Scheduler bandwidth control is in use, this parameter controls the amount of run-time (bandwidth) transferred to a run queue from the task's control group bandwidth pool. Small values allow the global bandwidth to be shared in a fine-grained manner among tasks, larger values reduce transfer overhead.
The default value is 5000

Firmware / BIOS / Microcode Settings

Adjacent Cache Line Prefetch
This BIOS option allows 2 options: "Enabled" and "Disabled".
This prefetcher always collects cache line pairs (128 bytes) from the main memory, providing that the data is not already contained in the cache. If this prefetcher is disabled, only one cache line (64 bytes) is collected, which contains the data required by the processor.
Default setting is "Enabled".
DMI Link ASPM Control
This BIOS option allows 4 options: "Disabled", "L0s", "L1" and "L0sL1".
The control of Active State Power Management(ASPM) supported on the Direct Media Interface(DMI) Link. L0s: L0s entry supported. L1: L1 entry supported. L0sL1: L0s and L1 entry supported. Disabled: No ASPM entry supported.
Default setting is "L1".
Energy Efficient Turbo
This BIOS option allows 2 options: "Enabled" and "Disabled".
This feature will opportunistically lower the turbo frequency to increase energy efficiency. If this option is disabled, turbo frequency will remain constant.
Default setting is "Auto".
Fan Control
This BIOS option allows 2 options: "Auto" and "Full".
The default setting is "Auto", which allows the system to control the fan speed according to the system temperature. If "Full" is selected, the system runs fans at 100% speed and it may improve the system performance. But it increases the power consumption of the system.
Default setting is "Auto".
Hardware Prefetcher
This BIOS option allows 2 options: "Enabled" and "Disabled".
This prefetcher looks for data streams on the assumption that if the data is requested at address A and A+1, the data will also presumably be required at address A+2. This data is then prefetched into the L2 cache from the main memory.
Default setting is "Enabled".
Hyper-Threading
This BIOS option enables or disables additional hardware thread which shares same physical core. Generally "Enabled" is recommended but disabling it makes sense for the application which requires the shortest possible response times.
Default setting is "Enabled".
Native PCIE Enable
This BIOS option allows 2 options: "Enabled" and "Disabled".
This feature enables or disables OS to control below features: Hot Plug, SHPC Native Hot Plug control, Power Management Events, PCIe Advanced Error Reporting control, PCIe Capability Structure control, and Latency Tolerance Reporting control.
Default setting is "Enabled".
Package C-State Un-demotion
This BIOS option allows 2 options: "Enabled" and "Disabled".
This feature enables processor to switch back to the original requested deeper Package C-state considering cases where demotion was the incorrect decision in determing Package C-state depth.
Default setting is "Disabled".
Race To Halt (RTH)
This BIOS option allows 2 options: "Enabled" and "Disabled".
RTH will dynamically increase CPU frequency in order to enter Package C-State faster to reduce overall power.
Default setting is "Enabled".
REFRESH_2X_MODE
This BIOS option allows 3 options: "Disabled", "1- Enabled for WARM or HOT", and "2- Enabled HOT only".
This feature enables REFRESH 2X mode which maintains an acceptable overall error rate by increase DRAM refresh rate when temperature is WARM or HOT. 0 - Disabled. 1 - iMC enables 2xRefresh rate mode when thermal status is Warm or Hot. 2 - iMC enables 2xRefresh rate mode when thermal status is Hot
Default setting is "Disabled".
Software Guard Extensions (SGX)
This BIOS option allows 3 options: "Disabled", "Enabled", and "Software Controlled".
Intel(R) SGX is a CPU extension that applications can use to create and access private memory areas. When "Disabled" is selected, SGX is disabled and cannot be used by applications. When "Enabled" is selected, SGX is enabled and can be used by applications. The reserved size of the private memory is specified by the BIOS. When "Software Controlled" is selected, SGX is enabled and can be used by applications. The reserved size of the private memory is specified by the operating system (OS).
Default setting is "Software Controlled".
VT-d
This BIOS option enables or disables I/O virtualization functions of the CPU. If the server is not used for virtualization, this option should be set to "Disabled".
Default setting is "Enabled".