SPEC HPC2002 Summary Hewlett-Packard Company hp server rx2600 cluster (1500MHz Itanium2) Tue Feb 17 17:51:21 2004 SPEC License #HPG2116 Tester: Hewlett-Packard Company Hardware available: May-2004 Test Site: Richardson, Texas Software available: May-2004 Test Date: Feb-2004 Benchmarks Ref Time Run Time Ratio ---------------- -------- -------- -------- 361.wrf_m 86400 217 399* ======================================================================== 361.wrf_m 86400 217 399* SPECenvM2002 399 HARDWARE -------- Hardware Vendor: Hewlett-Packard Company Model Name: hp server rx2600 cluster (1500MHz Itanium2) CPU: Intel Itanium 2 CPU MHz: 1500 FPU: Integrated CPU(s) enabled: 48 CPU(s) orderable: 1 to 2 per node, up to 64 nodes Primary Cache: L1 Inst/Data: 16 KB, associativity = 4 Secondary Cache: L2 Unified: 256 KB, associativity = 8 L3 Cache: L3 Unified: 6144 KB, associativity = 24 Other Cache: None Memory: 12GB per node (12 x 1 GB DDR 266 DIMMS) Disk Subsystem: 1x36GB 10k RPM SCSI system disk per node Other Hardware: See Notes section below. SOFTWARE -------- Parallel: MPI Processes-Threads: 48 MPI Processes: 48 OpenMP Threads: N/A Operating System: HPUX11i-TCOE B.11.23 Compiler: HP C/ANSI C Compiler B.11.23 HP aC++ Compiler B.11.23 HP Fortran 90 Compiler B.11.23 HP LIBF90 PHSS_29620 HP F90 Compiler PHSS_29663 HP aC++ Compiler PHSS_29655 HP C Compiler PHSS_29656 u2comp/be/plugin library PHSS_29657 HP MPI 02.00.01.00 B6060B File System: vxfs (system), vxfs through NFS (benchmark files) System State: Multi-user Other Software: NetCDF 3.5.0, HP MPI v2.00.01 NOTES ----- CPU(s) enabled: 48 (two per node, 24 nodes) Other Hardware: Computation Network: AB286A PCI-X 2-port Infiniband HCA for HPC AB346A 5m copper cable PCI-X Infiniband AB353A 7m copper cable PCI-X Infiniband AB291A PCI-X 12-port InfiniBand Copper Switch Topspin 96-port IB copper switch 99-00020-01 TS170 98-00045-01 12-port leaf boards (8) 98-00047-01 power supply 98-00044-01 controller module GigaBit on-board adapter for Administration and NFS PCI GigaBit card for NFS traffic (GigE-TX adapter A6825A ) NFS file server: rp5470 (PA-RISC) NFS File Server 4 PA8700 CPUs 750 MHz. 16 GB of memory 4 internal disks 73 GB Ultra2 SCSI 20 external disks 18 GB U160 SCSI striped with LVM across 4 SCSI controllers 15 external disks 73 GB FibreChannel mirrored with LVM across 2 FC controllers which contain the NFS filesystems accessed by the benchmark. These NFS filesystems are optimized for security rather than performance. File Server Network: HP ProCurve 9308 64-port copper Gigabit Ethernet Switch Built-in Gigabit Ethernet Adapters (one per node) Peak Flags: MPI mpif90 +DD64 +noppu +Ofast +Oinfo +U77 mpicc -Ae +DD64 +Ofast -DNOUNDERSCORE -DSPEC_HPG_MPI2 OPTIMIZE = ENV_SPEC_HPG_PARALLEL=MPI CPPFLAGS = -I. -C -P EXTRA_LIBS= -minshared -L${NETCDF}/lib/hpux64 -lnetcdf NETCDF = /home/clpack/netcdf-3.5.0 FPORTABILITY= -I${NETCDF}/include Alternate Source used for Peak: 361.wrf_m: module_big_step_utilities_em.F90 Improve data locality via loop interchange. Available as SPEC HPC2002 Source: env2002-src_hp-20040303.tar.gz Kernel Paramters (/stand/system): maxdsiz 0x7b03a000 maxdsiz_64bit 0x4000000000 maxssiz 0x10000000 maxssiz_64bit 0x40000000 maxtsiz 1073741824 maxtsiz_64bit 4294967296 vps_pagesize 4 vps_ceiling 64 dbc_min_pct 3 dbc_max_pct 3 Peak User Environment: use_submit_for_speed=1 submit = /home/f90pack/clust_mpirun $command clust_mpirun: mpirun -ITAPI -f appfile appfile: -h rx17 -np 2 -e MPI_FLAGS=y -e MPI_WORKDIR=$cwd $command ... -h rx40 -np 2 -e MPI_FLAGS=y -e MPI_WORKDIR=$cwd $command LSF used to initiate batch job submissions. Appfile is generated from within the LSF run. Netcdf source obtained from http://www.unidata.ucar.edu/packages/netcdf/ Netcdf built for HPUX 64 bit mode with: #!/bin/csh setenv CC '/opt/ansic/bin/cc +DD64' setenv CPPFLAGS "-D_HPUX_SOURCE -D_FILE_OFFSET_BITS=64 -Dextname" setenv FC '/opt/fortran90/bin/f90 +DD64' setenv FFLAGS -w setenv FLIBS -lU77 setenv CXX '/opt/aCC/bin/aCC +DD64' ./configure ----------------------------------------------------------------------------- For questions about this result, please contact the tester. For other inquiries, please contact webmaster@spec.org. Copyright 1999-2002 Standard Performance Evaluation Corporation Generated on Wed Mar 3 21:48:23 2004 by SPEC HPC2002 ASCII formatter v2.1