SPECsfs97_R1.v3 Result =============================================================================== Procom Technology Inc. : NetFORCE 4100 SPECsfs97_R1.v3 = 18146 Ops/Sec (Overall Response Time = 1.85 msec) =============================================================================== Throughput Response ops/sec msec 1006 1.1 2728 1.2 4517 1.2 6236 1.3 7984 1.5 9761 1.8 11516 2.0 13281 2.3 15039 2.6 16810 3.1 18146 4.2 =============================================================================== Server Configuration and Availability Vendor Procom Technology Inc. Hardware Available May 2003 Software Available June 2003 Date Tested May 2003 SFS License number 80 Licensee Location Irvine, CA CPU, Memory and Power Model Name NetFORCE 4100 Processor 3.06GHz Xeon (533 MHz Front_side Bus) # of Processors 1 Primary Cache (12KBI + 8KBD) on chip Secondary Cache 512KB Other Cache N/A UPS N/A Other Hardware Brocade SilkWorm 3200 switch Memory Size 4 GB (system Memory) NVRAM Size 4 GB (RAID controller) NVRAM Type SDRAM Cache Memory NVRAM Description 3-days battery Protection Server Software OS Name and Version NetFORCE Ver.4.2 Other Software None File System sfs2 NFS version 3 Server Tuning Buffer Cache Size Default # NFS Processes 70 Fileset Size 176.0 GB Network Subsystem Network Type Gigabit Ethernet Network Controller Desc. Gigabit Ethernet [PCI,1000Base-SX] Number Networks 1 Number Network Controllers 1 Protocol Type TCP Switch Type Extreme Summit48i Bridge Type N/A Hub Type N/A Other Network Hardware N/A Disk Subsystem and Filesystems Number Disk Controllers 2 [Dual ports] Number of Disks 115 Number of Filesystems 7 File System Creation Ops N/A File System Config 23 RAID0 group of five disks each. Disk Controller Integrated 2Gb Fibre Channel # of Controller Type 2 [Model No: BA03052] Number of Disks 115 Disk Type Seagate ST3146807FC 146GB 10K RPM & ST336704FC 36GB 10K RPM File Systems on Disks Filesystem (vol1 vol2 vol3 vol4 vol5 vol6 vol7) Special Config Notes See notes below. Load Generator (LG) Configuration Number of Load Generators 14 Number of Processes per LG 5 Biod Max Read Setting 2 Biod Max Write Setting 2 LG Type LG1 LG Model Intel Base Number and Type Processors PIII 700 MHz Memory Size 256 MB Operating System Redhat 7.0 Compiler gcc 2.96 Compiler Options -DNO_T_TYPES-DUSE_INTTYPES Network Type Intel PCI 100Base-T Testbed Configuration LG # LG Type Network Target File Systems Notes ---- ------- ------- ------------------- ----- 1..14 LG_1 1 /vol1 /vol2.../vol5; /vol6 /vol7.../vol3; /.... N/A =============================================================================== Notes and Tuning <> Seven file systems on two RAID zero groups with 8KB stripe size, <> each RAID group consists of 5 disks. There are three partitions <> per volume, each partitions is one RAID zero group with 8KB stripe <> size, each RAID group consists of 5 disks.There are two RAID groups <> for base volumes and twenty one for partitions. <> These are the parameters set in the OS: <> Set the number of NFS workers to 70. This specifies the number <> of NFS request handlers to run within the NetFORCE operating system. <> Disable directory auditing. Directory auditing is an optional file <> system validation and integrity check feature that can be enabled or <> disabled as required. <> Set the NFS UTF8 option to yes <> Disable file system readahead. <> Disable file system access time updates. =============================================================================== Generated on Wed Jun 11 10:05:14 EDT 2003 by SPEC SFS97 ASCII Formatter Copyright (c) 1997-2002 Standard Performance Evaluation Corporation