SPECsfs97_R1.v3 Result =============================================================================== Hewlett-Packard : HP Integrity rx6600 Server SPECsfs97_R1.v3 = NC (Overall Response Time = NC) =============================================================================== SPEC has determined that this result was not in compliance with the SPEC SFS97_R1 run and reporting rules. Specifically, the result did not meet the requirement that all software components must be generally available within six months of result publication due to the unavailability of of required patches. =============================================================================== Throughput Response ops/sec msec NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC =============================================================================== Server Configuration and Availability Vendor Hewlett-Packard Hardware Available December 2006 Software Available November 2007 Date Tested May 2007 SFS License number 3 Licensee Location Cupertino, CA CPU, Memory and Power Model Name HP Integrity rx6600 Server Processor Dual-Core Intel Itanium 2 9050 1.6GHz # of Processors 2 cores, 1 chip, 2 cores/chip Primary Cache 16 KB I+16 KB D on chip per core Secondary Cache 1 MB I+256 KB D on chip per core Other Cache 12MB I + D on chip per core UPS N/A Other Hardware N/A Memory Size 72 GB (36x2GB DIMMS) NVRAM Size 6 GB (256 MB per MSA Controller) NVRAM Type Integrated NVRAM/battery module NVRAM Description 4-day battery Server Software OS Name and Version HP-UX 11i V3 Other Software N/A File System VxFS NFS version 3 Server Tuning Buffer Cache Size Dynamic # NFS Processes 1 Fileset Size 435.2 GB Network Subsystem Network Type 10 Gigabit Ethernet Network Controller Desc. HP PCI-X 10GBase-SR Number Networks 2 (N1-2) Number Network Controllers 2 Protocol Type TCP Switch Type HP Procurve 3400CL Switch Bridge Type N/A Hub Type N/A Other Network Hardware N/A Disk Subsystem and Filesystems Number Disk Controllers 7 Number of Disks 337 Number of Filesystems 96 (F1-F96) File System Creation Ops See Notes File System Config See Notes Disk Controller Internal 8-port SAS Controller # of Controller Type 1 Number of Disks 1 Disk Type Seagate 72GB 10K RPM File Systems on Disks Operating System Special Config Notes N/A Disk Controller 4Gbps Dual Channel Fiber Channel PCI-X # of Controller Type 3 (dual) Number of Disks 336 Disk Type Seagate 36GB 15K RPM File Systems on Disks F1-F96 Special Config Notes N/A Load Generator (LG) Configuration Number of Load Generators 4 Number of Processes per LG 24 Biod Max Read Setting 4 Biod Max Write Setting 2 LG Type LG1 LG Model HP Integrity rx2600 server Number and Type Processors 2 Intel Itanium 2 900 MHz Memory Size 2 GB Operating System HP-UX 11i V2 Compiler HP C/ANSI C (C.11.23.09) Compiler Options -DHAS_GETHOSTNAME -DUSE_GETRLIMIT -DSETPGRP3 Network Type HP A7012A PC-XI 1000Base-T Adapter Testbed Configuration LG # LG Type Network Target File Systems Notes ---- ------- ------- ------------------- ----- 1 LG1 1 F1, F5, F9, F13, F17, F21, F25, F29, F33, F37, F41, F45, F49, F53, F57, F61, F65, F69, F73, F77, F81, F85, F89, F93 N/A 2 LG1 1 F2, F6, F10, F14, F18, F22, F26, F30, F34, F38, F42, F46, F50, F54, F58, F62, F66, F70, F74, F78, F82, F86, F90, F94 N/A 3 LG1 2 F3, F7, F11, F15, F19, F23, F27, F31, F35, F39, F43, F47, F51, F55, F59, F63, F67, F71, F75, F79, F83, F87, F91, F95 N/A 4 LG1 2 F4, F8, F12, F16, F20, F24, F28, F32, F36, F40, F44, F48, F52, F56, F60, F64, F68, F72, F76, F80, F84, F88, F92, F96 N/A =============================================================================== Notes and Tuning <> There are 6 HP StorageWorks 4/8 SAN Switches connected to the SUT <> (one per fibre channel port). Each SAN switch connects to one controller <> of 12 HP StorageWorks 1500cs Modular Smart Arrays. Each of the 12 <> MSA1500s has dual active fibre channel controllers. Each MSA1500 has two <> Modular Smart Array 30 Disk Enclosures containing 14 disks each. <> Each LUN is carved from an MSA30's 14 physical disks in a RAID-5 <> configuration with 64KB stripes, 4 LUNs per MSA30. <> There are 8 LUNs per MSA1500, four assigned to each of the MSA 1500 <> controllers. There is one test filesystem per logical disk. <> Each client mounts two LUNs from each MSA1500 (one from each controller). <> VxFS is used for the OS and test filesystems (F1-F96). <> Each test filesystem log is 32k entries, mounted noatime (no access time update <> except when they correspond to updated to ctime or mtime) <> Jumbo frames (9000-byte MTU) over 10Gbit Ethernet. <> <> Kernel Tunables <> fcache_fb_policy=1 Filesystem flush behind request policy (default: 0) <> filecache_max=37% Max physical memory for caching file I/O (default: 50%) <> filecache_min=15% Min physical memory for caching file I/O (default: 5%) <> ftable_hash_locks=32768 Number of file table locks (default: 64) <> lcpu_attr=1 Toggles lcpu attribute of default pset (default: 0 = disabled) <> max_thread_proc=1024 Maximum threads in each process (default: 256) <> nkthread=24000 Maximum number of threads per system (default: 8416) <> nproc=23000 Maximum number of processes per system (default: 4200) <> tcphashsz=65536 Size of the TCP hash table in bytes (default: 2048) <> vnode_hash_locks=32768 Number of vnode locks (default: 128) <> vps_ceiling=64 Maximum system-selected page size in kBytes (default: 16) <> vps_pagesize=64 Default user page size in kBytes (default: 16) <> vxfs_bc_bufhwm=4000000 VxFS metadata cache high water mark (default: 0) <> vx_ninode=2100000 Number of entries in the VxFS inode table (default: 0) <> <> Kernel Parameters (set with adb) <> enable_tops=0 Interrupt Forwarding Policy (default: 1=enabled) <> <> NFS Parameters (set in /etc/default/nfs) <> nfsd_listen_backlog=512 Listen Queue len for NFS over TCP/IP (default: 32) <> nfsd_servers=512 Maximum concurrent NFS requests (default: 0) <> <> Networking Parameters set in (/etc/rc.config.d/nddconf) <> socket_caching_tcp=5000 Entries used for TCP socket caching (default: 512) <> tcp_conn_request_max=10000 Max outstanding inbound conn reqs. (default: 4096) <> tcp_recv_hiwater_def=1MB Maxi size of the receive window (default: 32KB) <> tcp_xmit_hiwater_def=1MB Unsent data level trigger flow ctrl (default: 32KB) <> <> 10 Gbit Parameters for both adapters set in (/etc/rc.config.d/hpixgbeconf) <> hp_ixgbe_mtu=9000 Maximum transmission unit value in bytes (default: 1500) <> hp_ixgbe_tx_coal_range_1=1 Range limit 1 of xmit intr coalescing (default: 5) <> hp_ixgbe_tx_coal_range_2=5 Range limit 2 of xmit intr coalescing (default: 25) <> hp_ixgbe_tx_coal_range_3=50 Range limit 3 for xmit inter coalescing (default: 70) <> hp_ixgbe_tx_coal_frc_a=1 Frames for xmit intr coalescing for 0-R1 (default: 32) <> hp_ixgbe_tx_coal_frc_b=128 Frames for xmit intr coalescing for R1-R2 (default: 256) <> hp_ixgbe_tx_coal_frc_c=128 Frames for xmit intr coalescing for R2-R3 (default: 512) <> hp_ixgbe_tx_coal_frc_d=128 Frames for xmit intr coalescing for R3-100(default: 512) <> hp_ixgbe_tx_timer=22500 Transmit timer interrupt in microseconds (default: 225000) <> hp_ixgbe_rx_coal_range_1=1 Range limit 1 for recv intr coalescing (default: 5) <> hp_ixgbe_rx_coal_range_2=5 Range limit 2 for recv intr coalescing (default: 25) <> hp_ixgbe_rx_coal_range_3=50 Range limit 3 for recv intr coalescing (default: 70) <> hp_ixgbe_rx_coal_frc_a=1 Frames for recv intr coalescing for 0-R1 (default: 1) <> hp_ixgbe_rx_coal_frc_b=128 Frames for recv intr coalescing for R1-R2 (default: 64) <> hp_ixgbe_rx_coal_frc_c=128 Frames for recv intr coalescing for R2-R3 (default: 128) <> hp_ixgbe_rx_coal_frc_d=128 Frames for recv intr coalescing for R3-100(default: 512) <> hp_ixgbe_rx_timer=2000 Receive timer interrupt in microseconds (default: 100) <> <> Interrupts for all fibre channel adapters were assigned to CPU 0 using ivtctl(1m). <> Interrupts for both 10Gbit adapters were assigned to CPU 0 using ivtctl(1m). <> <> Filesystem Parameters (set with vxtunefs for all test filesystems) <> read_pref_io=8192 The preferred read request size (default 64KB) <> write_nstream=1000 Simultaneous parallel write requests outstanding. (default: 1) <> write_pref_io=8192 The preferred write request size (default 64KB) <> <> SUT Patches <> PHKL_36612 - VxFS cumulative patch <> PHKL_36613 - VM cumulative patch <> PHNE_36614 - NFS cumulative patch <> PHNE_36614 - RPC cumulative patch <> <> MSA Parameters <> read_cache=50 Percent of 256MB NVRAM used for read cache (default: 100%) <> write_cache=50 Percent of 256MB NVRAM used for write cache (default: 0%) <> auto_path_change=disable Implicit (auto load bal) path change (default: enabled) <> preferred_path=controller=1 even Sets preferred path for even LUNS to ctrlr 1 <> preferred_path=controller=2 odd Sets preferred path for odd LUNS to ctrlr 2 <> acl ctrl1=0 2 Creates access control list for controller 1 for even LUNS <> acl ctrl2=1 3 Creates access control list for controller 2 for odd LUNS <> <> Client Networking Parameters <> socket_caching_tcp=5000 Entries for TCP socket caching (default: 512) <> tcp_recv_hiwater_def=1MB Max size for the receive window (default: 32KB) <> tcp_xmit_hiwater_def=1MB Unsent data triggers write-side flow ctrl (default: 32KB) =============================================================================== Generated on Mon Jun 25 18:20:43 EDT 2007 by SPEC SFS97 ASCII Formatter Copyright (c) 1997-2007 Standard Performance Evaluation Corporation