SPECweb99_SSL Result

 Hewlett-Packard : HP Integrity rx4640               ||     NC    SPECweb99_SSL
 Zeus Technology Limited : Zeus 4.3r2                ||        

      SPEC has determined that this result was not in compliance with the
      SPECweb99_SSL run and reporting rules. Specifically, the result did
      not meet the 3 month availability requirement in the SPECweb99_SSL
      run rules due to a change in availability of a dependency of the
      web server.



               |  Conforming Simultaneous
   Iteration   |       Connections
      1        |         NC
      2        |         NC
      3        |         NC
    Median     |         NC

                              Availability Dates

All Hardware                  Dec-2004
HTTPS Software                Oct-2005
Operating System              Jul-2005
Supplemental System           Jul-2005


Vendor                        Hewlett-Packard
Model                         HP Integrity rx4640
Processor                     1.6 GHz Intel Itanium2 9M
# Processors                  1 core, 1 chip, 1 core/chip
Primary Cache                 16KBI + 16KBD on chip
Secondary Cache               256KB unified on chip
Other Cache                   9216KB unified on chip
Memory                        32 GB (32x1GB)
Disk Subsystem                2x73GB(15K RPM)
Disk Controllers              1 SCSI C1010 Fast Wide LVD (Internal)
Other Hardware                1 x HP Procurve 2724 Switch


Operating System              SuSE SLES 9 SP2
File System                   See Notes
Other Software                gcc 3.3.3 from distro

                                HTTPS Software

Vendor                        Zeus Technology Limited
HTTPS Software                Zeus 4.3r2
API                           ISAPI
Server Cache                  none
Log Mode                      Binary Log Format

                                 Test Sponsor

Test Date                     Jul-2005
Tested By                     Hewlett-Packard Company
SPEC License                  3


# of Controllers              1
Network Controllers           A9900A PCI-X Gigabit Ethernet
# of Nets                     1
Type of Nets                  Gigabit Ethernet
Network Speed                 1 Gb/s
MSL (sec)                     30 (Non RFC1122)
Time-Wait (sec)               60 (Non RFC1122)
MTU                           1500


# of Clients                  3
Model                         HP Integrity rx2600
Processor                     1.0GHz Intel Itanium2
# of Processors               2
Memory                        6GB
Network Controller            HP A6825A
Operating System              HPUX 11i V2
Compiler                      B3901BA HP C/ANSI C

                            Benchmark Configuration

Requested Connections         1350
Fileset Size (MB)             4440.8

                           Notes/Tuning information

SUT Notes
    Two 73GB 15K RPM SCSI
    1x73GB disk partitioned for OS and logs
    OS ReiserFS with defaults
    Log filesystem ext2 with noatime,nodiratime - no inode access time updates, no access control lists
    1x73GB disk used for file_set
    file_set filesystem ext2 mounted noatime,nodiratime -  no inode access time updates, no access control lists

Operating System Notes
    sysctl tunes:
    net.core.rmem_max=1048576, maximum receive socket buffer size (default 65535)
    net.core.rmem_default=1048576, default receive socket buffer size (default 65535)
    net.core.wmem_max=1048576, , maximum send socket buffer size (default 65535)
    net.core.wmem_default=1048576, default send socket buffer size (default 65535)
    net.ipv4.tcp_max_syn_backlog=20480, sets length of per-socket backlog queue (default 1024)
    net.ipv4.tcp_syncookies=0, Disable TCP SYN Cookie Protection (default 1)
    net.ipv4.tcp_timestamps=0, turns TCP timestamp support off (default 1)
    net.ipv4.tcp_max_tw_buckets=2000000, sets TCP time-wait buckets pool size (default 180000)
    net.core.netdev_max_backlog=20000, number of unprocessed input packets before kernel starts dropping them (default 300)
    net.core.somaxconn=20480, maximum length of the listen queue (128)
    sys.vm.max_map_count=131072, maximum number of active map areas (65536)
    fs.file-max=2000000, maximum number of open files (default 1024)
    ulimit -n 500000 (prior to launching web server), sets number of open files (default 1024)

HTTPS Software Notes
    Zeus Global Parameters:
    tuning!modules!cgi!minuid 0
    tuning!modules!cgi!mingid 0
    tuning!bind_any      no
    tuning!cache_cooling_time 0
    tuning!cache_files       569263
    tuning!cache_flush_interval  180000
    tuning!cache_large_file   1048576
    tuning!cache_max_bytes    0
    tuning!cache_small_file  90000
    tuning!cache_stat_expire  180000
    tuning!cbuff_size         65536
    tuning!client_first_optimise yes
    tuning!fadvise!max_unflushed 2147483647
    tuning!keepalive_max          -1
    tuning!keepalive_timeout      1200
    tuning!keepalive      yes
    tuning!listen_queue_size 8192
    tuning!max_connections -1
    tuning!maxaccept    2048
    tuning!modules!cgi!cbuff_size  1048576
    tuning!modules!cgi!cleansize  0
    tuning!modules!isapi!enabled yes
    tuning!modules!nsapi!enabled no
    tuning!modules!stats!enabled no
    tuning!multiple_accept    yes
    tuning!sendfile      no
    tuning!softservers      no
    tuning!so_rbuff_size     0
    tuning!so_wbuff_size      1048576
    tuning!support_tls1 no
    tuning!ssl_keepalive yes
    tuning!ssl_sessioncache_size 9109
    tuning!ssl_diskcache    no
    tuning!ssl_cbuff_size   103000
    tuning!ssl_sessioncache_expiry 120
    tuning!timeout 600
    tuning!unique_bind      yes
    tuning!use_poll no
    Zeus runningsite configuration:
    modules!cgi!enabled yes
    modules!isapi!enabled yes

    Zeus ISAPI interface used
    Zeus PEPP Toolkit (0.9) used for SPECweb99 dynamic content
    ./Configure -ssl=yes
    compiled with gcc 3.3.3 from distro

Network Notes
    Networking Tunable Parameters:
    Ethtool used to disable TSO on the NIC (default enabled)
    InterruptThrottleRate=700 (via modprobe) Set maximum interrupt rate for NIC (default dynamic)
    RxDescriptors=512 (via modprobe) Number of receive descriptors allocated (default 256)
    txqueuelen=20000 (via ifconfig) Sets transmit queue length (default 100)

Client Notes
    Client code generated with ./configure --enable-posix-threads
    HP-UX Tunable Parameters:
    max_thread_proc=4096  Number of threads per process (64)

Other Notes
    Tuning Disclosure: HP-20030414.txt
    Dynamic API: HP-20020724-API.tgz


Test Run Details
    Run    Conforming  Percent  |  Throughput  Response ops/sec/  Kbits/
    Num    Connections Conform  |  ops/sec     msec     loadgen   sec
      1    NC          NC       |  NC          NC       NC        NC
      1    NC          NC       |  NC          NC       NC        NC
      1    NC          NC       |  NC          NC       NC        NC

First published at SPEC.org on 17-Aug-2005