SPEC® CINT2006 Result

Fujitsu

PRIMERGY RX900 S1, Intel Xeon X7542, 2.66 GHz

Hardware
CPU Name:	Intel Xeon X7542
CPU Characteristics:	Intel Turbo Boost Technology up to 2.80 GHz
CPU MHz:	2667
FPU:	Integrated
CPU(s) enabled:	48 cores, 8 chips, 6 cores/chip
CPU(s) orderable:	4,6,8 chips
Primary Cache:	32 KB I + 32 KB D on chip per core
Secondary Cache:	256 KB I+D on chip per core
L3 Cache:	18 MB I+D on chip per chip
Other Cache:	None
Memory:	1 TB (128 x 8 GB DDR3-1066 DIMMs)
Disk Subsystem:	2 x 147 GB (SAS, 15000 RPM, RAID0)
Other Hardware:	None

Software
Operating System:	SUSE Linux Enterprise Server 11 (x86_64), Kernel 2.6.27.19-5-default
Compiler:	Intel C++ Professional Compiler for IA32 and Intel 64, Version 11.1 Build 20100203 Package ID: l_cproc_p_11.1.069
Auto Parallel:	No
File System:	ext2
System State:	Run level 3 (multi-user)
Base Pointers:	32-bit
Peak Pointers:	32/64-bit
Other Software:	Microquill SmartHeap V9.0

Results Table

Benchmark	Base							Peak
Benchmark	Copies	Seconds	Ratio	Seconds	Ratio	Seconds	Ratio	Copies	Seconds	Ratio	Seconds	Ratio	Seconds	Ratio
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
400.perlbench	48	517	906	518	905	521	900	48	440	1070	438	1070	437	1070
401.bzip2	48	775	598	772	600	774	598	48	721	642	714	649	717	646
403.gcc	48	553	698	554	698	554	697	48	553	698	554	698	554	697
429.mcf	48	393	1110	393	1120	394	1110	48	393	1110	391	1120	391	1120
445.gobmk	48	541	930	543	928	542	930	48	510	987	511	985	510	987
456.hmmer	48	278	1610	277	1620	278	1610	48	240	1870	240	1870	240	1860
458.sjeng	48	657	884	656	886	657	884	48	600	968	600	968	601	967
462.libquantum	48	436	2280	434	2290	434	2290	48	416	2390	417	2390	421	2360
464.h264ref	48	711	1490	710	1500	712	1490	48	677	1570	675	1570	678	1570
471.omnetpp	48	602	498	602	499	602	498	48	576	521	575	521	576	521
473.astar	48	596	565	596	565	596	565	48	560	602	559	602	560	601
483.xalancbmk	48	317	1040	317	1040	317	1040	48	317	1040	317	1040	317	1040

The config file option 'submit' was used.
 numactl was used to bind copies to the cores

The following command was used prior to run

   ulimit -s unlimited
   echo 1 > /proc/sys/vm/zone_reclaim_mode

icc -m32

icpc -m32

-xSSE4.2 -ipo -O3 -no-prec-div -static -opt-prefetch

403.gcc:

	icpc -m32
473.astar:	icpc -m64

400.perlbench:	-xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -static(pass 2) -prof-use(pass 2) -ansi-alias
401.bzip2:	-xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -static(pass 2) -prof-use(pass 2) -opt-prefetch -ansi-alias -auto-ilp32
403.gcc:	basepeak = yes
429.mcf:	-xSSE4.2 -ipo -O3 -no-prec-div -static -opt-prefetch
445.gobmk:	-xSSE4.2(pass 2) -prof-gen(pass 1) -prof-use(pass 2) -O2 -ipo -no-prec-div -ansi-alias
456.hmmer:	-xSSE4.2 -ipo -O3 -no-prec-div -static -unroll2 -ansi-alias -auto-ilp32
458.sjeng:	-xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -static(pass 2) -prof-use(pass 2) -unroll4 -auto-ilp32
462.libquantum:	-xSSE4.2 -ipo -O3 -no-prec-div -static -auto-ilp32 -opt-prefetch
464.h264ref:	-xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -static(pass 2) -prof-use(pass 2) -unroll2 -ansi-alias

471.omnetpp:	-xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/opt/SmartHeap_9/lib -lsmartheap
473.astar:	-xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=routine -Wl,-z,muldefs -L/opt/SmartHeap_9_64/lib -lsmartheap64
483.xalancbmk:	basepeak = yes

403.gcc: