# Invocation command line: # /home/cpu2006/bin/runspec --define invoke_with_interleave --flagsurl=Intel-ic16.0-official-linux64.xml,NEC-Platform-Settings-V1.2-110h-RevA.xml --rate 72 -c cpu2006-1.2-ic16.0-lin64-ws-avx2-rate-20150812.cfg --define smt --define cores=36 --define physicalfirst --define invoke_with_interleave --define drop_caches --define THP_enabled -T all -o all int # output_root was not used for this run ############################################################################ ############################################################################ # This is a sample config file. It was tested with: # # Compiler name/version: Intel Compiler 16.0 # Operating system version: 64-Bit RedHat Enterprise Linux64 7.1 # Hardware: Intel processors supporting AVX2 # ############################################################################ # SPEC CPU2006 Intel Linux64 config file # 20150812 Intel Compiler 16.0 for Linux64 ############################################################################ action = validate tune = base,peak # ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'ext' to track binaries. # ######################################################## %define version 20150812 ext = cpu2006-1.2-ic16.0-lin64-ws-avx2-rate-%{version} # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=1 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # ##################################################################################### # You can't change the line with fail_build=1 without changing the line ext= # to reflect the data on which you re-built the binaries. # In addition, the sw_compiler lines below, must be modified to match the description # of the compiler being used to build the binaries ##################################################################################### PATHSEP = / check_md5=1 reportable=1 bench_post_setup=sync parallel_test=0 mean_anyway=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6914 -f -p flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic16.0-official-linux64.xml %ifdef %{default-platform-flags} flagsurl2=Default-Platform-Flags.xml %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh # # These are listed as benchmark-tuning-extension-machine # int=default=default=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin OBJ = .o SMARTHEAP32_DIR = /sh SMARTHEAP64_DIR = /sh PORTABILITY = -D_FILE_OFFSET_BITS=64 fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 OBJ = .o # For UP systems, we need to know if the processors are ordered across cores first or in order # If across cores, processors 0, 1, 2 and 3 are on distinct physical cores # Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores default: submit = numactl --localalloc --physcpubind=$SPECCOPYNUM $command %ifdef %{no-numa} submit = taskset -c $SPECCOPYNUM $command %endif #################################################################### # Compiler options # for Nehalem use -xSSE4.2 # for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3 #################################################################### default: SSE = -xCORE-AVX2 FASTNOSTATIC = $(SSE) -ipo -O3 -no-prec-div FAST = $(SSE) -ipo -O3 -no-prec-div ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ 400.perlbench=default: CPORTABILITY= -DSPEC_CPU_LINUX_IA32 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default: CXXPORTABILITY= -DSPEC_CPU_LINUX fp=default: PORTABILITY = -DSPEC_CPU_LP64 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX ################################################################ # Tuning Flags ################################################################ # # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -opt-mem-layout-trans=3 CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -opt-mem-layout-trans=3 fp=base=default=default: OPTIMIZE= $(FAST) -opt-prefetch COPTIMIZE= -auto-p32 -ansi-alias -opt-mem-layout-trans=3 CXXOPTIMIZE= -auto-p32 -ansi-alias -opt-mem-layout-trans=3 ################################################################ # Peak Tuning Flags int 2006 fast ################################################################ int=peak=default: COPTIMIZE= -ansi-alias -opt-mem-layout-trans=3 CXXOPTIMIZE= -ansi-alias -opt-mem-layout-trans=3 PASS1_CFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_LDCFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCXXFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use 400.perlbench=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 COPTIMIZE= -auto-ilp32 401.bzip2=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -opt-prefetch -auto-ilp32 -ansi-alias 403.gcc=peak=default: COPTIMIZE = $(FASTNOSTATIC) feedback=0 429.mcf=peak=default: basepeak=yes 445.gobmk=peak=default: PASS1_CFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CFLAGS = $(SSE) -prof-use PASS1_LDCFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_LDCFLAGS = $(SSE) -prof-use 456.hmmer=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= $(FASTNOSTATIC) -unroll2 -auto-ilp32 feedback=no 458.sjeng=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -unroll4 -auto-ilp32 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: COPTIMIZE= -unroll2 -ansi-alias 471.omnetpp=peak=default: CXXOPTIMIZE= -ansi-alias -opt-ra-region-strategy=block 473.astar=peak=default: basepeak=yes 483.xalancbmk=peak=default: basepeak=yes ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 CXXOPTIMIZE= -auto-ilp32 PASS1_CFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CFLAGS = $(FASTNOSTATIC) -opt-mem-layout-trans=3 -prof-use PASS1_CXXFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CXXFLAGS = $(FASTNOSTATIC) -opt-mem-layout-trans=3 -prof-use PASS1_FFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_FFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_LDFLAGS = $(FASTNOSTATIC) -prof-use 410.bwaves=peak=default: basepeak=yes #################################################################################################################################### %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 2 \\* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- 433.milc=peak=default: basepeak=yes 434.zeusmp=peak=default: basepeak=yes feedback=0 435.gromacs=peak=default: OPTIMIZE= -opt-prefetch 436.cactusADM=peak=default: basepeak=yes 437.leslie3d=peak=default: basepeak=yes #################################################################################################################################### %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 2 \\* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 444.namd=peak=default: CXXOPTIMIZE= -fno-alias -auto-ilp32 447.dealII=peak=default: basepeak=yes 450.soplex=peak=default: PORTABILITY = -D_FILE_OFFSET_BITS=64 CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin OPTIMIZE= -opt-malloc-options=3 CXXOPTIMIZE= #################################################################################################################################### %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 2 \\* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -ansi-alias 454.calculix=peak=default: basepeak=yes 459.GemsFDTD=peak=default: basepeak=yes #################################################################################################################################### %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 2 \\* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 465.tonto=peak=default: OPTIMIZE= -unroll4 -auto -inline-calloc -opt-malloc-options=3 470.lbm=peak=default: basepeak=yes 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: basepeak=yes ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: #include: SUT.inc # ----- Begin inclusion of 'SUT.inc' ############################################################################ default=default=default=default: license_num = 9006 test_sponsor = NEC Corporation hw_avail = Apr-2016 sw_avail = Jan-2016 tester = NEC Corporation hw_cpu_name = Intel Xeon E5-2697 v4 # hw_cpu_char = # hw_cpu_char = Intel Turbo Boost Technology disabled hw_cpu_char = Intel Turbo Boost Technology up to 3.60 GHz hw_cpu_mhz = 2300 hw_disk = 1 x 1 TB SATA, 7200 RPM hw_fpu = Integrated hw_memory = 256 GB (16 x 16 GB 2Rx4 PC4-2400T-R) hw_model = Express5800/R120g-1M (Intel Xeon E5-2697 v4) hw_ncpuorder = 1,2 chips hw_ncores = 36 hw_nchips = 2 hw_ncoresperchip = 18 hw_nthreadspercore = 2 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 45 MB I+D on chip per chip hw_ocache = None hw_vendor = NEC Corporation prepared_by = NEC Corporation sw_file = ext4 sw_os000 = Red Hat Enterprise Linux Server release 7.2 sw_os001 = (Maipo) sw_os002 = Kernel 3.10.0-327.4.5.el7.x86_64 sw_state = Run level 3 (multi-user) # notes_plat_000 = Default BIOS settings were used. notes_plat_000 = BIOS Settings: notes_plat_005 = Power Management Policy: Custom notes_plat_010 = Energy Performance: Performance notes_plat_015 = Patrol Scrub: Disabled # notes_plat_020 = Demand Scrub: Disabled notes_plat_020 = Cluster on Die: Enabled # notes_plat_030 = Snoop Mode: Home Snoop # notes_plat_030 = Snoop Mode: Home Snoop with Directory # notes_plat_035 = Hyper-Threading: Disabled notes_025 = notes_030 = The Express5800/R120g-1M (Intel Xeon E5-2697 v4) and notes_035 = the Express5800/R120g-2M (Intel Xeon E5-2697 v4) models are electronically equivalent. notes_040 = The results have been measured on the Express5800/R120g-2M (Intel Xeon E5-2697 v4) model. notes_045 = # ---- End inclusion of '/home/cpu2006/config/SUT.inc' notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_010 = For details, please see the config file. %ifdef %{no-numa} notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %endif notes_015 = Binaries compiled on a system with 1x Intel Core i5-4670K CPU + 32GB notes_020 = memory using RedHat EL 7.1 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" int=default=default=default: sw_compiler000 = C/C++: Version 16.0.0.101 of Intel C++ Studio XE sw_compiler001 = for Linux sw_base_ptrsize = 32-bit sw_peak_ptrsize = 32/64-bit sw_other = Microquill SmartHeap V10.2 default: %ifdef %{THP_enabled} notes_050 = Transparent Huge Pages enabled with: notes_055 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %endif %ifdef %{THP_disabled} notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %endif %ifdef %{drop_caches} notes_060 = Filesystem page cache cleared with: notes_065 = echo 1 > /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_070 = runspec command invoked through numactl i.e.: notes_075 = numactl --interleave=all runspec %endif fp=default=default=default: sw_compiler001 = C/C++: Version 16.0.0.101 of Intel C++ Studio XE sw_compiler002 = for Linux; sw_compiler004 = Fortran: Version 16.0.0.101 of Intel Fortran sw_compiler005 = Studio XE for Linux sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit sw_other001 = None # The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6914 -f -p' default: # Sysinfo program /home/cpu2006/config/sysinfo.rev6914 # $Rev: 6914 $ $Date:: 2014-06-25 #$ e3fbb8667b5a285932ceab81e28219e1 # running on r120g-m Mon Mar 14 11:28:34 2016 # # This section contains SUT (System Under Test) info as seen by # some common utilities. To remove or add to this section, see: # http://www.spec.org/cpu2006/Docs/config.html#sysinfo # # From /proc/cpuinfo # model name : Intel(R) Xeon(R) CPU E5-2697 v4 @ 2.30GHz # 2 "physical id"s (chips) # 72 "processors" # cores, siblings (Caution: counting these is hw and system dependent. The # following excerpts from /proc/cpuinfo might not be reliable. Use with # caution.) # cpu cores : 18 # siblings : 36 # physical 0: cores 0 1 2 3 4 8 9 10 11 16 17 18 19 20 24 25 26 27 # physical 1: cores 0 1 2 3 4 8 9 10 11 16 17 18 19 20 24 25 26 27 # cache size : 23040 KB # # From /proc/meminfo # MemTotal: 264029692 kB # HugePages_Total: 0 # Hugepagesize: 2048 kB # # From /etc/*release* /etc/*version* # os-release: # NAME="Red Hat Enterprise Linux Server" # VERSION="7.2 (Maipo)" # ID="rhel" # ID_LIKE="fedora" # VERSION_ID="7.2" # PRETTY_NAME="Red Hat Enterprise Linux Server 7.2 (Maipo)" # ANSI_COLOR="0;31" # CPE_NAME="cpe:/o:redhat:enterprise_linux:7.2:GA:server" # redhat-release: Red Hat Enterprise Linux Server release 7.2 (Maipo) # system-release: Red Hat Enterprise Linux Server release 7.2 (Maipo) # system-release-cpe: cpe:/o:redhat:enterprise_linux:7.2:ga:server # # uname -a: # Linux r120g-m 3.10.0-327.4.5.el7.x86_64 #1 SMP Thu Jan 21 04:10:29 EST 2016 # x86_64 x86_64 x86_64 GNU/Linux # # run-level 3 Mar 14 11:23 # # SPEC is set to: /home/cpu2006 # Filesystem Type Size Used Avail Use% Mounted on # /dev/sda3 ext4 909G 217G 646G 26% / # Additional information from dmidecode: # # Warning: Use caution when you interpret this section. The 'dmidecode' program # reads system data which is "intended to allow hardware to be accurately # determined", but the intent may not be met, as there are frequent changes to # hardware, firmware, and the "DMTF SMBIOS" standard. # # BIOS American Megatrends Inc. 5.0.1005 01/15/2016 # Memory: # 16x Samsung M393A2G40DB1-CRC 16 GB 2 rank 2400 MHz # # (End of data from sysinfo program) # hw_cpu_name = Intel Xeon E5-2697 v4 # hw_disk = 909 GB add more disk info here # hw_memory001 = 251.798 GB fixme: If using DDR3, format is: # hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' # hw_nchips = 2 # prepared_by = root (is never output, only tags rawfile) # sw_file = ext4 # sw_os001 = Red Hat Enterprise Linux Server release 7.2 (Maipo) # sw_os002 = 3.10.0-327.4.5.el7.x86_64 # sw_state = Run level 3 (add definition here) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl001 = http://www.spec.org/cpu2006/flags/NEC-Platform-Settings-V1.2-120g-RevB.xml notes_000 =Environment variables set by runspec before the start of the run: notes_005 =LD_LIBRARY_PATH = "/home/cpu2006/libs/32:/home/cpu2006/libs/64:/home/cpu2006/sh" notes_010 =