# Invocation command line:
# /home/cpu2017.1.0.2.ic18.0/bin/harness/runcpu --define default-platform-flags --copies 40 --configfile ic18.0-lin-core-avx2-rate-20170901.cfg --define smt-on --define cores=20 --define physicalfirst --define invoke_with_interleave --define drop_caches --tune base,peak --output_format all --nopower --runmode rate --tune base:peak --size refrate fprate
# output_root was not used for this run
############################################################################
#------------------------------------------------------------------------------
# This is a sample SPEC CPU2017 config file. It is applicable for:
#
# Compiler name/version: Intel(R) C/C++ and Fortran 18.0.0.128 Compilers for Linux
# Operating system version: Redhat Enterprise Linux 7.4, GLIBC 2.17
# Hardware: Intel(R) processors supporting CORE-AVX2 tuning
#
# If you wish to build your own:
# (1) Copy this to a new name
# cd %SPEC%/config
# copy this.cfg that.cfg
# (2) Change items that are marked 'EDIT' (search for it)
#
# If you have different software or hardware, this config file may not work.
# You may find a better config file for your system next to posted results:
# http://www.spec.org/cpu2017/results
#
# Compiler issues: Contact your compiler vendor, not SPEC.
# For SPEC help: http://www.spec.org/auto/cpu2017/Docs/techsupport.html
#------------------------------------------------------------------------------
#--------- Preprocessor -------------------------------------------------------
#
# Optionally edit if you wish:
%define build_ncpus 8 # controls number of simultaneous compiles
# Used to date the label
%define version 20170901
# Used for the optimization tuning part of the label (not required)
%if defined(%{noopt})
%define opt_label -noopt
%elif defined(%{medopt})
%define opt_label -medopt
%else
%define opt_label
%endif
# Used for labeling static linked builds (not required)
%if defined(%{static})
%define static_label -static
%else
%define static_label
%endif
#--------- Label --------------------------------------------------------------
# Arbitrary string, tags your binaries & directories.
# Two Suggestions: # (1) Change this label as you try new ideas.
label = ic18.0-lin-core-avx2-rate%{opt_label}%{static_label}-%{version} # (2) Make the label meaningful to YOU.
#--------- Global Settings ----------------------------------------------------
# For info, see:
# https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname XXX
# Example: https://www.spec.org/auto/cpu2017/Docs/config.html#tune
########################################################
# ATTENTION ATTENTION ATTENTION
########################################################
#
# NOTE If you change fail_build then PLEASE also
# change the line 'define version', because
# SPEC review tools use 'label' to track binaries.
#
########################################################
#
# vvvvvvvvvvvv # do not change unless you read NOTE above
fail_build=0 # do not change unless you read NOTE above
# ^^^^^^^^^^^^ # do not change unless you read NOTE above
#
########################################################
#
action = validate
command_add_redirect = 1
line_width = 1020
log_line_width = 1020
makeflags = -j%{build_ncpus}
output_format = txt,cfg,pdf,csv
preenv = 1
tune = base
bench_post_setup = sync
parallel_test = 1
mean_anyway = 1
reportable = 1
copies = 1
#Reference the flags Files
flagsurl000=http://www.spec.org/cpu2017/flags/Intel-ic18.0-official-linux64.xml
%ifdef %{default-platform-flags}
flagsurl001=http://www.spec.org/cpu2017/flags/Lenovo-Platform-SPECcpu2017-Flags-V1.2-SKL-A.xml
%endif
# Set some environment variables
preENV_LD_LIBRARY_PATH = $[top]/lib/ia32:$[top]/lib/intel64:$[top]/je5.0.1-32:$[top]/je5.0.1-64
# Affinitization
# For UP systems, we need to know if the processors are ordered across cores first or in order
# If across cores, processors 0, 1, 2 and 3 are on distinct physical cores
# Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores
default:
submit = numactl --localalloc --physcpubind=$SPECCOPYNUM -- $command
%ifdef %{no-numa}
submit = taskset -c $SPECCOPYNUM $command
%endif
#--------- Compilers ----------------------------------------------------------
intrate,fprate:
CC = icc -m64 -std=c11
CXX = icpc -m64
FC = ifort -m64
default:
# How to say "Show me your version, please"
CC_VERSION_OPTION = --version
CXX_VERSION_OPTION = --version
FC_VERSION_OPTION = --version
JEMALLOC32_DIR = /usr/local/je5.0.1-32/lib
JEMALLOC64_DIR = /usr/local/je5.0.1-64/lib
%if !defined(%{static})
JEMALLOC32 = jemalloc
JEMALLOC64 = jemalloc
%else
JEMALLOC32 = libjemalloc.a
JEMALLOC64 = libjemalloc.a
%endif
#--------- Portability --------------------------------------------------------
intrate,fprate:
PORTABILITY= -DSPEC_LP64
500.perlbench_r:
CPORTABILITY = -DSPEC_LINUX_X64
521.wrf_r:
CPORTABILITY = -DSPEC_CASE_FLAG
FPORTABILITY= -convert big_endian
523.xalancbmk_r:
CXXPORTABILITY=-DSPEC_LINUX
526.blender_r:
CPORTABILITY= -DSPEC_LINUX -funsigned-char
527.cam4_r:
CPORTABILITY= -DSPEC_CASE_FLAG
#--------- How Many CPUs? -----------------------------------------------------
# Both SPECrate and SPECspeed can test multiple chips / cores / hw threads
# - For SPECrate, you set the number of copies.
# See: https://www.spec.org/cpu2017/Docs/system-requirements.html#MultipleCPUs
#
# q. How many should I set?
# a. Unknown, you will have to try it and see!
#
# To get you started, some suggestions:
#
# copies - This config file defaults to testing only 1 copy. You might
# try changing it to match the number of cores on your system,
# or perhaps the number of virtual CPUs as reported by:
# grep -c processor /proc/cpuinfo
# Be sure you have enough memory. See:
# https://www.spec.org/cpu2017/Docs/system-requirements.html#memory
#
default:
copies = 1 # EDIT to change number of copies (see above)
#-------- Tuning Flags -------------------------------------------------
intspeed,fpspeed:
#reconsider using a speed config file instead of a rate config file
fail=1
intrate,fprate:
SSE = -xCORE-AVX2
EXTRA_FOPTIMIZE = -nostandard-realloc-lhs -align array32byte
intrate=default:
EXTRA_LIBS = -L$(JEMALLOC64_DIR) -l$(JEMALLOC64)
EXTRA_LDFLAGS = -Wl,-z,muldefs
intrate=base:
%if defined(%{noopt})
OPT_ROOT = -O0
%elif defined(%{medopt})
OPT_ROOT = -O2
%else
OPT_ROOT = -ipo -O3 -no-prec-div
%endif
FAST_NO_STATIC = $(SSE) $(OPT_ROOT)
FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT)
FAST = $(SSE) $(OPT_ROOT) -static
FORT_FAST = $(SSE) $(OPT_ROOT) -static
%if !defined(%{static})
COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=3
CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=3
FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=3
%if defined(%{noopt})
COPTIMIZE = $(OPT_ROOT)
CXXOPTIMIZE = $(OPT_ROOT)
FOPTIMIZE = $(OPT_ROOT)
%endif
%else
COPTIMIZE = $(FAST) -qopt-mem-layout-trans=3
CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=3
FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=3
%if defined(%{noopt})
COPTIMIZE = $(OPT_ROOT) -static
CXXOPTIMIZE = $(OPT_ROOT) -static
FOPTIMIZE = $(OPT_ROOT) -static
%endif
%endif
fprate=base:
%if defined(%{noopt})
OPT_ROOT = -O0
%elif defined(%{medopt})
OPT_ROOT = -O2
%else
OPT_ROOT = -ipo -O3 -no-prec-div
%endif
FAST_NO_STATIC = $(SSE) $(OPT_ROOT)
FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT)
FAST = $(SSE) $(OPT_ROOT) -static
FORT_FAST = $(SSE) $(OPT_ROOT) -static
%if !defined(%{static})
COPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
%if defined(%{noopt})
COPTIMIZE = $(OPT_ROOT)
CXXOPTIMIZE = $(OPT_ROOT)
FOPTIMIZE = $(OPT_ROOT)
%endif
%else
COPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
CXXOPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
FOPTIMIZE = $(FORT_FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
%if defined(%{noopt})
COPTIMIZE = $(OPT_ROOT) -static
CXXOPTIMIZE = $(OPT_ROOT) -static
FOPTIMIZE = $(OPT_ROOT) -static
%endif
%endif
intrate=peak:
%if defined(%{noopt}) || defined(%{medopt})
#not building or executing peak against less opt
fail=1
%endif
PASS1_CFLAGS = -prof-gen
PASS2_CFLAGS = -prof-use
PASS1_FFLAGS = -prof-gen
PASS2_FFLAGS = -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = -prof-use
PASS1_LDFLAGS = -prof-gen
PASS2_LDFLAGS = -prof-use
OPT_ROOT = -ipo -O3 -no-prec-div
FAST_NO_STATIC_PASS1 = $(OPT_ROOT)
FORT_FAST_NO_STATIC_PASS1 = $(OPT_ROOT)
FAST_PASS1 = $(OPT_ROOT) -static
FORT_FAST_PASS1 = $(OPT_ROOT) -static
FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT)
FORT_FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT)
FAST_PASS2 = $(SSE) $(OPT_ROOT) -static
FORT_FAST_PASS2 = $(SSE) $(OPT_ROOT) -static
%if !defined(%{static})
PASS1_COPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=3
PASS1_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=3
PASS1_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=3
PASS2_COPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=3
PASS2_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=3
PASS2_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=3
%else
PASS1_COPTIMIZE = $(FAST_PASS1) -qopt-mem-layout-trans=3
PASS1_CXXOPTIMIZE = $(FAST_PASS1) -qopt-mem-layout-trans=3
PASS1_FOPTIMIZE = $(FORT_FAST_PASS1) -qopt-mem-layout-trans=3
PASS2_COPTIMIZE = $(FAST_PASS2) -qopt-mem-layout-trans=3
PASS2_CXXOPTIMIZE = $(FAST_PASS2) -qopt-mem-layout-trans=3
PASS2_FOPTIMIZE = $(FORT_FAST_PASS2) -qopt-mem-layout-trans=3
%endif
fprate=peak:
%if defined(%{noopt}) || defined(%{medopt})
#not building or executing peak against less opt
fail=1
%endif
PASS1_CFLAGS = -prof-gen
PASS2_CFLAGS = -prof-use
PASS1_FFLAGS = -prof-gen
PASS2_FFLAGS = -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = -prof-use
PASS1_LDFLAGS = -prof-gen
PASS2_LDFLAGS = -prof-use
OPT_ROOT = -ipo -O3 -no-prec-div
FAST_NO_STATIC_PASS1 = $(OPT_ROOT)
FORT_FAST_NO_STATIC_PASS1 = $(OPT_ROOT)
FAST_PASS1 = $(OPT_ROOT) -static
FORT_FAST_PASS1 = $(OPT_ROOT) -static
FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT)
FORT_FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT)
FAST_PASS2 = $(SSE) $(OPT_ROOT) -static
FORT_FAST_PASS2 = $(SSE) $(OPT_ROOT) -static
%if !defined(%{static})
PASS1_COPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
PASS1_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
PASS1_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
PASS2_COPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
PASS2_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
PASS2_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
%else
PASS1_COPTIMIZE = $(FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
PASS1_CXXOPTIMIZE = $(FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
PASS1_FOPTIMIZE = $(FORT_FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
PASS2_COPTIMIZE = $(FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
PASS2_CXXOPTIMIZE = $(FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
PASS2_FOPTIMIZE = $(FORT_FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
%endif
#some benchmarks do not want to share a core
%ifdef %{smt-on}
%define numpeakcopies %{cores}
510.parest_r,521.wrf_r,554.roms_r=peak:
copies = %{numpeakcopies}
%endif
500.perlbench_r=peak=default:
#[56]00.perlbench[rs] has non standard signed overflow
EXTRA_OPTIMIZE = -fno-strict-overflow
525.x264_r=peak:
EXTRA_OPTIMIZE = -fno-alias
502.gcc_r,523.xalancbmk_r=peak:
CC = icc -m32 -std=c11 -L/opt/intel/compilers_and_libraries_2018/linux/lib/ia32
CXX = icpc -m32 -L/opt/intel/compilers_and_libraries_2018/linux/lib/ia32
FC = ifort -m32 -L/opt/intel/compilers_and_libraries_2018/linux/lib/ia32
EXTRA_LIBS = -L$(JEMALLOC32_DIR) -l$(JEMALLOC32)
EXTRA_LDFLAGS = -Wl,-z,muldefs
#Change portability for 32b, large file support for safety
PORTABILITY = -D_FILE_OFFSET_BITS=64
#int rate subset for removing FDO
505.mcf_r,525.x264_r,548.exchange2_r,557.xz_r=peak=default:
feedback = 0
OPT_ROOT = -ipo -O3 -no-prec-div
FAST_NO_STATIC = $(SSE) $(OPT_ROOT)
FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT)
FAST = $(SSE) $(OPT_ROOT) -static
FORT_FAST = $(SSE) $(OPT_ROOT) -static
%if !defined(%{static})
COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=3
CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=3
FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=3
%else
COPTIMIZE = $(FAST) -qopt-mem-layout-trans=3
CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=3
FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=3
%endif
#fp rate subset for removing FDO
503.bwaves_r,538.imagick_r,549.fotonik3d_r=peak=default:
feedback = 0
OPT_ROOT = -ipo -O3 -no-prec-div
FAST_NO_STATIC = $(SSE) $(OPT_ROOT)
FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT)
FAST = $(SSE) $(OPT_ROOT) -static
FORT_FAST = $(SSE) $(OPT_ROOT) -static
%if !defined(%{static})
COPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
%else
COPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
CXXOPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
FOPTIMIZE = $(FORT_FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3
%endif
#-------------------------------------------------------------------------------
# Tester and System Descriptions - EDIT the sections below
#-------------------------------------------------------------------------------
# For info about any field, see
# https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname
# Example: https://www.spec.org/auto/cpu2017/Docs/config.html#hw_memory
#-------------------------------------------------------------------------------
#--------- If you install new compilers, EDIT this section --------------------
intrate,intspeed,fpspeed,fprate:
sw_compiler000 = C/C++: Version 18.0.0.128 of Intel C/C++
sw_compiler001 = Compiler for Linux;
sw_compiler002 = Fortran: Version 18.0.0.128 of Intel Fortran
sw_compiler003 = Compiler for Linux
sw_base_ptrsize = 64-bit
fprate,fpspeed:
sw_peak_ptrsize = 64-bit
sw_other = None
intrate,intspeed:
sw_peak_ptrsize = 32/64-bit
sw_other001 = jemalloc: jemalloc memory allocator library V5.0.1;
sw_other002 = jemalloc: configured and built at default for 32bit (i686) and 64bit (x86_64) targets;
sw_other003 = jemalloc: built with the RedHat Enterprise 7.4, and the system compiler gcc 4.8.5;
sw_other004 = jemalloc: sources avilable from jemalloc.net or https://github.com/jemalloc/jemalloc/releases;
#--------- EDIT Your info ---------------------------------------------------------
# To understand the difference between hw_vendor/sponsor/tester, see:
# www.spec.org/auto/cpu2017/Docs/config.html#test_sponsor
intrate,intspeed,fprate,fpspeed: # Important: keep this line
hw_vendor = Lenovo Global Technology
tester = Lenovo Global Technology
test_sponsor = Lenovo Global Technology
license_num = 9017
prepared_by = Lenovo Global Technology
#--------- EDIT system availability dates and system information ----------------------------------------------
intrate,intspeed,fprate,fpspeed: # Important: keep this line
# Example # Brief info about field
hw_avail = Aug-2017
sw_avail = Sep-2017
hw_cpu_nominal_mhz = 2400
hw_cpu_max_mhz = 3200
hw_ncores = 20
hw_nthreadspercore = 2
hw_ncpuorder = 1,2 chips
hw_model000 = ThinkSystem SR550
hw_model001 = (2.40 GHz, Intel Xeon Gold 5115)
hw_other = None
# sw_other = # TurboHeap Library V8.1 # Other perf-relevant sw, or "None"
hw_pcache = 32 KB I + 32 KB D on chip per core
hw_scache = 1 MB I+D on chip per core
hw_tcache = 13.75 MB I+D on chip per chip
hw_ocache = None
# hw_memory001 = # 4 TB (256 x 16 GB 2Rx4 PC4-2133P-R, # N GB (M x N GB nRxn
# hw_memory002 = # running at 1600 MHz) # PCn-nnnnnR-n[, ECC and other info])
#--------- Sysinfo fields - You may need to adjust this section ---------------
# Note: Some commented-out fields above are automatically set to preliminary
# values by sysinfo
# www.spec.org/auto/cpu2017/Docs/config.html#sysinfo
# Uncomment lines for which you already have a better answer than sysinfo
#
intrate,intspeed,fprate,fpspeed: # Important: keep this line
# Example # Brief info about field
# hw_cpu_name = # Intel Xeon E9-9999 v9 # chip name
# hw_disk = # 9 x 9 TB SATA III 9999 RPM # Size, type, other perf-relevant info
# hw_nchips = # 99 # number chips enabled
# sw_file = # ext99 # File system
# sw_state = # Run level 99 # Software state.
# sw_os001 = # Linux Sailboat # Operating system
# sw_os002 = # Distribution 7.2 SP1 # and version
#--------- EDIT Intel Recommended Fields - You may wish to adjust this section -----
default:
notes_015 = Binaries compiled on a system with 1x Intel Core i7-4790 CPU + 32GB RAM
notes_020 = memory using Redhat Enterprise Linux 7.4
notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited"
#Ease of tagging results from the runcpu command line with commands run outside of runcpu harneess
#Adjust as necessary for your SUT
%if defined(%{THP_enabled})
notes_200 = Transparent Huge Pages enabled with:
notes_201 = echo always > /sys/kernel/mm/transparent_hugepage/enabled
%elif defined(%{THP_disabled})
notes_200 = Transparent Huge Pages disabled with:
notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled
%else
notes_025 = Transparent Huge Pages enabled by default
%endif
%ifdef %{drop_caches}
notes_030 = Prior to runcpu invocation
notes_035 = Filesystem page cache synced and cleared with:
notes_040 = sync; echo 3> /proc/sys/vm/drop_caches
%endif
%ifdef %{invoke_with_interleave}
notes_045 = runcpu command invoked through numactl i.e.:
notes_050 = numactl --interleave=all runcpu <etc>
%endif
intrate,fprate:
%if defined(%{no-numa})
notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit'
notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor.
notes_submit_002 = For details, please see the config file.
%else
notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit'
notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor.
notes_submit_010 = For details, please see the config file.
%endif
# The following settings were obtained by running the sysinfo_program
# 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:ecd2bef08f316af97f5a7768b641e2a3307c1b4b68efb5a57fa76367d790d233)
default:
notes_plat_sysinfo_000 = Sysinfo program /home/cpu2017.1.0.2.ic18.0/bin/sysinfo
notes_plat_sysinfo_005 = Rev: r5797 of 2017-06-14 96c45e4568ad54c135fd618bcc091c0f
notes_plat_sysinfo_010 = running on linux-yyst Mon Dec 11 18:00:09 2017
notes_plat_sysinfo_015 =
notes_plat_sysinfo_020 = SUT (System Under Test) info as seen by some common utilities.
notes_plat_sysinfo_025 = For more information on this section, see
notes_plat_sysinfo_030 = https://www.spec.org/cpu2017/Docs/config.html#sysinfo
notes_plat_sysinfo_035 =
notes_plat_sysinfo_040 = From /proc/cpuinfo
notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) Gold 5115 CPU @ 2.40GHz
notes_plat_sysinfo_050 = 2 "physical id"s (chips)
notes_plat_sysinfo_055 = 40 "processors"
notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The following
notes_plat_sysinfo_065 = excerpts from /proc/cpuinfo might not be reliable. Use with caution.)
notes_plat_sysinfo_070 = cpu cores : 10
notes_plat_sysinfo_075 = siblings : 20
notes_plat_sysinfo_080 = physical 0: cores 0 1 2 3 4 8 9 10 11 12
notes_plat_sysinfo_085 = physical 1: cores 0 1 2 3 4 8 9 10 11 12
notes_plat_sysinfo_090 =
notes_plat_sysinfo_095 = From lscpu:
notes_plat_sysinfo_100 = Architecture: x86_64
notes_plat_sysinfo_105 = CPU op-mode(s): 32-bit, 64-bit
notes_plat_sysinfo_110 = Byte Order: Little Endian
notes_plat_sysinfo_115 = CPU(s): 40
notes_plat_sysinfo_120 = On-line CPU(s) list: 0-39
notes_plat_sysinfo_125 = Thread(s) per core: 2
notes_plat_sysinfo_130 = Core(s) per socket: 10
notes_plat_sysinfo_135 = Socket(s): 2
notes_plat_sysinfo_140 = NUMA node(s): 2
notes_plat_sysinfo_145 = Vendor ID: GenuineIntel
notes_plat_sysinfo_150 = CPU family: 6
notes_plat_sysinfo_155 = Model: 85
notes_plat_sysinfo_160 = Model name: Intel(R) Xeon(R) Gold 5115 CPU @ 2.40GHz
notes_plat_sysinfo_165 = Stepping: 4
notes_plat_sysinfo_170 = CPU MHz: 2394.380
notes_plat_sysinfo_175 = BogoMIPS: 4788.76
notes_plat_sysinfo_180 = Virtualization: VT-x
notes_plat_sysinfo_185 = L1d cache: 32K
notes_plat_sysinfo_190 = L1i cache: 32K
notes_plat_sysinfo_195 = L2 cache: 1024K
notes_plat_sysinfo_200 = L3 cache: 14080K
notes_plat_sysinfo_205 = NUMA node0 CPU(s): 0-9,20-29
notes_plat_sysinfo_210 = NUMA node1 CPU(s): 10-19,30-39
notes_plat_sysinfo_215 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
notes_plat_sysinfo_220 = pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp
notes_plat_sysinfo_225 = lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc
notes_plat_sysinfo_230 = aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg
notes_plat_sysinfo_235 = fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes
notes_plat_sysinfo_240 = xsave avx f16c rdrand lahf_lm abm 3dnowprefetch ida arat epb pln pts dtherm intel_pt
notes_plat_sysinfo_245 = tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2
notes_plat_sysinfo_250 = erms invpcid rtm cqm mpx avx512f avx512dq rdseed adx smap clflushopt clwb avx512cd
notes_plat_sysinfo_255 = avx512bw avx512vl xsaveopt xsavec xgetbv1 cqm_llc cqm_occup_llc
notes_plat_sysinfo_260 =
notes_plat_sysinfo_265 = /proc/cpuinfo cache data
notes_plat_sysinfo_270 = cache size : 14080 KB
notes_plat_sysinfo_275 =
notes_plat_sysinfo_280 = From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a
notes_plat_sysinfo_285 = physical chip.
notes_plat_sysinfo_290 = available: 2 nodes (0-1)
notes_plat_sysinfo_295 = node 0 cpus: 0 1 2 3 4 5 6 7 8 9 20 21 22 23 24 25 26 27 28 29
notes_plat_sysinfo_300 = node 0 size: 193110 MB
notes_plat_sysinfo_305 = node 0 free: 192365 MB
notes_plat_sysinfo_310 = node 1 cpus: 10 11 12 13 14 15 16 17 18 19 30 31 32 33 34 35 36 37 38 39
notes_plat_sysinfo_315 = node 1 size: 193504 MB
notes_plat_sysinfo_320 = node 1 free: 192746 MB
notes_plat_sysinfo_325 = node distances:
notes_plat_sysinfo_330 = node 0 1
notes_plat_sysinfo_335 = 0: 10 21
notes_plat_sysinfo_340 = 1: 21 10
notes_plat_sysinfo_345 =
notes_plat_sysinfo_350 = From /proc/meminfo
notes_plat_sysinfo_355 = MemTotal: 395893764 kB
notes_plat_sysinfo_360 = HugePages_Total: 0
notes_plat_sysinfo_365 = Hugepagesize: 2048 kB
notes_plat_sysinfo_370 =
notes_plat_sysinfo_375 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_380 = SuSE-release:
notes_plat_sysinfo_385 = SUSE Linux Enterprise Server 12 (x86_64)
notes_plat_sysinfo_390 = VERSION = 12
notes_plat_sysinfo_395 = PATCHLEVEL = 2
notes_plat_sysinfo_400 = # This file is deprecated and will be removed in a future service pack or release.
notes_plat_sysinfo_405 = # Please check /etc/os-release for details about this release.
notes_plat_sysinfo_410 = os-release:
notes_plat_sysinfo_415 = NAME="SLES"
notes_plat_sysinfo_420 = VERSION="12-SP2"
notes_plat_sysinfo_425 = VERSION_ID="12.2"
notes_plat_sysinfo_430 = PRETTY_NAME="SUSE Linux Enterprise Server 12 SP2"
notes_plat_sysinfo_435 = ID="sles"
notes_plat_sysinfo_440 = ANSI_COLOR="0;32"
notes_plat_sysinfo_445 = CPE_NAME="cpe:/o:suse:sles:12:sp2"
notes_plat_sysinfo_450 =
notes_plat_sysinfo_455 = uname -a:
notes_plat_sysinfo_460 = Linux linux-yyst 4.4.21-69-default #1 SMP Tue Oct 25 10:58:20 UTC 2016 (9464f67)
notes_plat_sysinfo_465 = x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_470 =
notes_plat_sysinfo_475 = run-level 3 Dec 11 17:58
notes_plat_sysinfo_480 =
notes_plat_sysinfo_485 = SPEC is set to: /home/cpu2017.1.0.2.ic18.0
notes_plat_sysinfo_490 = Filesystem Type Size Used Avail Use% Mounted on
notes_plat_sysinfo_495 = /dev/sda2 btrfs 744G 13G 730G 2% /home
notes_plat_sysinfo_500 =
notes_plat_sysinfo_505 = Additional information from dmidecode follows. WARNING: Use caution when you interpret
notes_plat_sysinfo_510 = this section. The 'dmidecode' program reads system data which is "intended to allow
notes_plat_sysinfo_515 = hardware to be accurately determined", but the intent may not be met, as there are
notes_plat_sysinfo_520 = frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard.
notes_plat_sysinfo_525 = BIOS Lenovo -[TEE119J-1.20]- 09/06/2017
notes_plat_sysinfo_530 = Memory:
notes_plat_sysinfo_535 = 12x Hynix HMA84GR7AFR4N-VK 32 GB 2 rank 2666, configured at 2400
notes_plat_sysinfo_540 =
notes_plat_sysinfo_545 = (End of data from sysinfo program)
hw_cpu_name = Intel Xeon Gold 5115
hw_disk = 1 x 800 GB SAS SSD
hw_memory000 = 384 GB (12 x 32 GB 2Rx4 PC4-2666V-R, running at
hw_memory001 = 2400)
hw_nchips = 2
prepared_by = root (is never output, only tags rawfile)
fw_bios = Lenovo BIOS Version TEE119J 1.20 released Sep-2017
sw_file = btrfs
sw_os000 = SUSE Linux Enterprise Server 12 SP2 (x86_64)
sw_os001 = Kernel 4.4.21-69-default
sw_state = Run level 3 (multi-user)
# End of settings added by sysinfo_program
# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
notes_000 =Environment variables set by runcpu before the start of the run:
notes_005 =LD_LIBRARY_PATH = "/home/cpu2017.1.0.2.ic18.0/lib/ia32:/home/cpu2017.1.0.2.ic18.0/lib/intel64"
notes_010 =LD_LIBRARY_PATH = "$LD_LIBRARY_PATH:/home/cpu2017.1.0.2.ic18.0/je5.0.1-32:/home/cpu2017.1.0.2.ic18.0/je5.0.1-64"
notes_plat_form_000 =BIOS configuration:
notes_plat_form_005 =Choose Operating Mode set to Maximum Performance
notes_plat_form_010 =DCU Streamer Prefetcher set to Enable
notes_plat_form_015 =MONITORMWAIT set to Enable
notes_plat_form_020 =SNC set to Enable