|
Inspur Corporation Inspur NF5280R6 (Ampere Altra Q80-33) |
SPECrate®2017_int_base = 596 |
|
SPECrate®2017_int_peak = Not Run |
| CPU2017 License: | 3358 | Test Date: | Sep-2021 |
|---|---|---|---|
| Test Sponsor: | Inspur Corporation | Hardware Availability: | Jan-2022 |
| Tested by: | Inspur Corporation | Software Availability: | Dec-2020 |
Benchmark result graphs are available in the PDF report.
| Hardware | |
|---|---|
| CPU Name: | Ampere Altra Q80-33 |
| Max MHz: | 3300 |
| Nominal: | 3000 |
| Enabled: | 160 cores, 2 chips |
| Orderable: | 2 chips |
| Cache L1: | 64 KB I + 64 KB D on chip per core |
| L2: | 1 MB I+D on chip per core |
| L3: | 32 MB I+D on chip per chip |
| Other: | None |
| Memory: | 512 GB (16 x 32 GB 2Rx8 PC4-3200AA-R) |
| Storage: | 1 x 480 GB SATA SSD |
| Other: | None |
| Software | |
|---|---|
| OS: | Red Hat Enterprise Linux release 8.3 (Ootpa) 4.18.0-240.el8.aarch64 |
| Compiler: | C/C++/Fortran: Version 10.2.1 of Ampere GCC |
| Parallel: | No |
| Firmware: | Version 05.00.04 released Aug-2021 |
| File System: | xfs |
| System State: | Run level 3 (multi-user) |
| Base Pointers: | 64-bit |
| Peak Pointers: | Not Applicable |
| Other: | Jemalloc memory allocator library v5.2.1 |
| Power Management: | BIOS and OS set to prefer performance at the cost of additional power usage. |
Results Table
| Benchmark | Base | Peak | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
| SPECrate®2017_int_base | 596 | |||||||||||||
| SPECrate®2017_int_peak | Not Run | |||||||||||||
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
| 500.perlbench_r | 160 | 397 | 642 | 400 | 638 | 397 | 642 | |||||||
| 502.gcc_r | 160 | 571 | 397 | 569 | 398 | 571 | 397 | |||||||
| 505.mcf_r | 160 | 1136 | 228 | 1136 | 228 | 1136 | 228 | |||||||
| 520.omnetpp_r | 160 | 773 | 272 | 775 | 271 | 774 | 271 | |||||||
| 523.xalancbmk_r | 160 | 316 | 535 | 316 | 535 | 317 | 533 | |||||||
| 525.x264_r | 160 | 180 | 1560 | 179 | 1570 | 179 | 1570 | |||||||
| 531.deepsjeng_r | 160 | 232 | 790 | 232 | 790 | 232 | 791 | |||||||
| 541.leela_r | 160 | 327 | 810 | 327 | 811 | 327 | 809 | |||||||
| 548.exchange2_r | 160 | 212 | 1980 | 215 | 1950 | 218 | 1920 | |||||||
| 557.xz_r | 160 | 501 | 345 | 501 | 345 | 500 | 345 | |||||||
Compiler Notes
Binaries were compiled on a system with 2x Ampere Altra Q80-33 CPU chips + 256 GB Memory using CentOS 8.3. Ampere GCC 10.2.1 is available via https://github.com/AmpereComputing/ampere-gcc/releases
Submit Notes
The config file option 'submit' was used. 'numactl' was used to bind copies to the cores.
Operating System Notes
'ulimit -s unlimited' was used to set environment stack size Set dirty_ratio=8 to limit dirty cache to 8% of memory i.e. echo 8 | sudo tee /proc/sys/vm/dirty_ratio Set swappiness=1 to swap only if necessary i.e. echo 1 | sudo tee /proc/sys/vm/swappiness Set zone_reclaim_mode=1 to free local node memory and avoid remote memory i.e. echo 1 | sudo tee /proc/sys/vm/zone_reclaim_mode Set drop_caches=3 to reset caches before invoking runcpu i.e. echo 3 | sudo tee /proc/sys/vm/drop_caches Set numa_balancing=0 to disable automatic numa balancing i.e. echo 0 | sudo tee /proc/sys/kernel/numa_balancing Switch off all ktune and tuned settings i.e. sudo tuned-adm off Transparent huge pages set to 'never' i.e. sudo bash -c "echo never > /sys/kernel/mm/transparent_hugepage/enabled" Enable address randomization i.e. echo 2 | sudo tee /proc/sys/kernel/randomize_va_space runcpu command invoked through numactl 1 chip system: numactl --interleave=0-3 runcpu <etc> 2 chip system: numactl --interleave=all runcpu <etc>
Environment Variables Notes
Environment variables set by runcpu before the start of the run:
LD_LIBRARY_PATH =
"/home/CPU2017/jemalloc/install/lib:/home/CPU2017/gcc/install/lib64:/hom
e/amptest/ampere_spec2017/spec2017/jemalloc/install/lib:/home/amptest/am
pere_spec2017/spec2017/gcc/install/lib64:/home/amptest/ampere_spec2017/s
pec2017/jemalloc/install/lib:"
General Notes
NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. NA: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. Jemalloc v5.2.1 is available via https://github.com/jemalloc/jemalloc/releases/download/5.2.1/jemalloc-5.2.1.tar.bz2 It was built on CentOS 8.3 using Version 10.2.1 of Ampere GCC with configure options --prefix=/home/amptest/jemalloc/install --with-lg-quantum=3
Platform Notes
BIOS configuration:
ANC Mode Set to Quadrant
Sysinfo program /home/CPU2017/bin/sysinfo
Rev: r6622 of 2021-04-07 982a61ec0915b55891ef0e16acafc64d
running on localhost.localdomain Sat Sep 18 22:21:48 2021
SUT (System Under Test) info as seen by some common utilities.
For more information on this section, see
https://www.spec.org/cpu2017/Docs/config.html#sysinfo
From /proc/cpuinfo
*
* Did not identify cpu model. If you would
* like to write your own sysinfo program, see
* www.spec.org/cpu2017/config.html#sysinfo
*
*
* 0 "physical id" tags found. Perhaps this is an older system,
* or a virtualized system. Not attempting to guess how to
* count chips/cores for this system.
*
160 "processors"
cores, siblings (Caution: counting these is hw and system dependent. The following
excerpts from /proc/cpuinfo might not be reliable. Use with caution.)
From lscpu from util-linux 2.32.1:
Architecture: aarch64
Byte Order: Little Endian
CPU(s): 160
On-line CPU(s) list: 0-159
Thread(s) per core: 1
Core(s) per socket: 80
Socket(s): 2
NUMA node(s): 8
Vendor ID: ARM
Model: 1
Stepping: r3p1
CPU max MHz: 3300.0000
CPU min MHz: 1000.0000
BogoMIPS: 50.00
L1d cache: 64K
L1i cache: 64K
L2 cache: 1024K
L3 cache: 32768K
NUMA node0 CPU(s): 0-19
NUMA node1 CPU(s): 20-39
NUMA node2 CPU(s): 40-59
NUMA node3 CPU(s): 60-79
NUMA node4 CPU(s): 80-99
NUMA node5 CPU(s): 100-119
NUMA node6 CPU(s): 120-139
NUMA node7 CPU(s): 140-159
Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp
cpuid asimdrdm lrcpc dcpop asimddp ssbs
From numactl --hardware
WARNING: a numactl 'node' might or might not correspond to a physical chip.
available: 8 nodes (0-7)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
node 0 size: 64974 MB
node 0 free: 60258 MB
node 1 cpus: 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
node 1 size: 65459 MB
node 1 free: 60782 MB
node 2 cpus: 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
node 2 size: 65459 MB
node 2 free: 60832 MB
node 3 cpus: 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
node 3 size: 65459 MB
node 3 free: 60873 MB
node 4 cpus: 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99
node 4 size: 64436 MB
node 4 free: 59727 MB
node 5 cpus: 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117
118 119
node 5 size: 65459 MB
node 5 free: 61051 MB
node 6 cpus: 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137
138 139
node 6 size: 65421 MB
node 6 free: 60989 MB
node 7 cpus: 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157
158 159
node 7 size: 65390 MB
node 7 free: 60882 MB
node distances:
node 0 1 2 3 4 5 6 7
0: 10 11 11 12 20 20 21 21
1: 11 10 12 11 20 20 21 21
2: 11 12 10 11 21 21 22 22
3: 12 11 11 10 21 21 22 22
4: 20 20 21 21 10 11 11 12
5: 20 20 21 21 11 10 12 11
6: 21 21 22 22 11 12 10 11
7: 21 21 22 22 12 11 11 10
From /proc/meminfo
MemTotal: 534589632 kB
HugePages_Total: 0
Hugepagesize: 524288 kB
/sbin/tuned-adm active
No current active profile.
/sys/devices/system/cpu/cpu*/cpufreq/scaling_governor has
performance
From /etc/*release* /etc/*version*
os-release:
NAME="Red Hat Enterprise Linux"
VERSION="8.3 (Ootpa)"
ID="rhel"
ID_LIKE="fedora"
VERSION_ID="8.3"
PLATFORM_ID="platform:el8"
PRETTY_NAME="Red Hat Enterprise Linux 8.3 (Ootpa)"
ANSI_COLOR="0;31"
redhat-release: Red Hat Enterprise Linux release 8.3 (Ootpa)
system-release: Red Hat Enterprise Linux release 8.3 (Ootpa)
system-release-cpe: cpe:/o:redhat:enterprise_linux:8.3:ga
uname -a:
Linux localhost.localdomain 4.18.0-240.el8.aarch64 #1 SMP Wed Sep 23 05:09:38 EDT 2020
aarch64 aarch64 aarch64 GNU/Linux
Kernel self-reported vulnerability status:
CVE-2018-12207 (iTLB Multihit): Not affected
CVE-2018-3620 (L1 Terminal Fault): Not affected
Microarchitectural Data Sampling: Not affected
CVE-2017-5754 (Meltdown): Not affected
CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store
Bypass disabled via prctl
CVE-2017-5753 (Spectre variant 1): Mitigation: __user pointer
sanitization
CVE-2017-5715 (Spectre variant 2): Not affected
CVE-2020-0543 (Special Register Buffer Data Sampling): Not affected
CVE-2019-11135 (TSX Asynchronous Abort): Not affected
run-level 3 Sep 18 05:19
SPEC is set to: /home/CPU2017
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/rhel-home xfs 372G 40G 333G 11% /home
From /sys/devices/virtual/dmi/id
Vendor: Inspur
Product: NF5280R6
Product Family: ARM
Serial: 221624226
Additional information from dmidecode 3.2 follows. WARNING: Use caution when you
interpret this section. The 'dmidecode' program reads system data which is "intended to
allow hardware to be accurately determined", but the intent may not be met, as there are
frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard.
Memory:
2x Array 1 Manufacturer 10 Array 1 Part Number 10
2x Array 1 Manufacturer 12 Array 1 Part Number 12
2x Array 1 Manufacturer 14 Array 1 Part Number 14
2x Array 1 Manufacturer 16 Array 1 Part Number 16
2x Array 1 Manufacturer 2 Array 1 Part Number 2
2x Array 1 Manufacturer 4 Array 1 Part Number 4
2x Array 1 Manufacturer 6 Array 1 Part Number 6
2x Array 1 Manufacturer 8 Array 1 Part Number 8
16x Samsung M393A4K40DB3-CWE 32 GB 2 rank 3200
BIOS:
BIOS Vendor: American Megatrends Inc.
BIOS Version: 05.00.04
BIOS Date: 08/23/2021
BIOS Revision: 5.15
Firmware Revision: 1.7
(End of data from sysinfo program)
Compiler Version Notes
==============================================================================
C | 500.perlbench_r(base) 502.gcc_r(base) 505.mcf_r(base)
| 525.x264_r(base) 557.xz_r(base)
------------------------------------------------------------------------------
gcc (Ampere Computing Build 11923 20201215) 10.2.1 20201216
Copyright (C) 2020 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
------------------------------------------------------------------------------
==============================================================================
C++ | 520.omnetpp_r(base) 523.xalancbmk_r(base) 531.deepsjeng_r(base)
| 541.leela_r(base)
------------------------------------------------------------------------------
g++ (Ampere Computing Build 11923 20201215) 10.2.1 20201216
Copyright (C) 2020 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
------------------------------------------------------------------------------
==============================================================================
Fortran | 548.exchange2_r(base)
------------------------------------------------------------------------------
GNU Fortran (Ampere Computing Build 11923 20201215) 10.2.1 20201216
Copyright (C) 2020 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
------------------------------------------------------------------------------
Base Portability Flags
| 500.perlbench_r: | -DSPEC_LINUX_AARCH64 -DSPEC_LP64 |
| 502.gcc_r: | -DSPEC_LP64 |
| 505.mcf_r: | -DSPEC_LP64 |
| 520.omnetpp_r: | -DSPEC_LP64 |
| 523.xalancbmk_r: | -DSPEC_LINUX -DSPEC_LP64 |
| 525.x264_r: | -DSPEC_LP64 |
| 531.deepsjeng_r: | -DSPEC_LP64 |
| 541.leela_r: | -DSPEC_LP64 |
| 548.exchange2_r: | -DSPEC_LP64 |
| 557.xz_r: | -DSPEC_LP64 |