Lenovo Global Technology ThinkSystem SR665 V3 |
SPECspeed®2017_int_base = 15.8 |
SPECspeed®2017_int_peak = 16.1 |
CPU2017 License: | 9017 | Test Date: | Jan-2023 |
---|---|---|---|
Test Sponsor: | Lenovo Global Technology | Hardware Availability: | Feb-2023 |
Tested by: | Lenovo Global Technology | Software Availability: | Nov-2022 |
Benchmark result graphs are available in the PDF report.
Hardware | |
---|---|
CPU Name: | AMD EPYC 9174F |
Max MHz: | 4400 |
Nominal: | 4100 |
Enabled: | 32 cores, 2 chips, 2 threads/core |
Orderable: | 1,2 chips |
Cache L1: | 32 KB I + 32 KB D on chip per core |
L2: | 1 MB I+D on chip per core |
L3: | 256 MB I+D on chip per chip, 32 MB shared / 2 cores |
Other: | None |
Memory: | 384 GB (24 x 16 GB 1Rx8 PC5-4800B-R, running at 3600) |
Storage: | 1 x 480 GB SATA SSD |
Other: | None |
Software | |
---|---|
OS: | Red Hat Enterprise Linux 9.0 (Plow) Kernel 5.14.0-70.13.1.el9_0.x86_64 |
Compiler: | C/C++/Fortran: Version 4.0.0 of AOCC |
Parallel: | Yes |
Firmware: | Lenovo BIOS Version KAE105L 1.20 released Dec-2022 |
File System: | xfs |
System State: | Run level 3 (multi-user) |
Base Pointers: | 64-bit |
Peak Pointers: | 64-bit |
Other: | None |
Power Management: | BIOS and OS set to balance power and performance |
Power | |
---|---|
Max. Power (W): | 422.41 |
Idle Power (W): | 94.9 |
Min. Temperature (C): | 22.06 |
Elevation (m): | 43 |
Line Standard: | 220 V / 50 Hz / 1 phase / 3 wires |
Provisioning: | Line-powered |
Power Settings | |
---|---|
Management FW: | Version 1.20 of KAX307N |
Memory Mode: | Normal |
Power-Relevant Hardware | |
---|---|
Power Supply: | 1 x 750 W (non-redundant) |
Details: | ThinkSystem 750W Titanium Power Supply 4P57A82019 |
Backplane: | 8 x 2.5-inch HDD back plane |
Other Storage: | None |
Storage Model #s: | 4XB7A17101 |
NICs Installed: | 1 x ThinkSystem Ethernet 4-port Adaptor @ 1 Gb |
NICs Enabled (FW/OS): | 4 / 1 |
NICs Connected/Speed: | 1 @ 1 Gb |
Other HW Model #s: | 6 x Performance fans |
Power Analyzer | |
---|---|
Power Analyzer: | WIN:9888 |
Hardware Vendor: | YOKOGAWA, Inc. |
Model: | YokogawaWT310E |
Serial Number: | C3UD17024E |
Input Connection: | Default |
Metrology Institute: | CNAS |
Calibration By: | GRG METROLOGY & TEST (BEIJING) CO., LTD. |
Calibration Label: | J202210116758A-0003 |
Calibration Date: | 19-Oct-2022 |
PTDaemon® Version: | 1.9.2 (3976349f; 2020-12-08) |
Setup Description: | Connected to PSU1 |
Current Ranges Used: | 2.5A |
Voltage Range Used: | 300V |
Temperature Meter | |
---|---|
Temperature Meter: | WIN:9889 |
Hardware Vendor: | Digi International, Inc. |
Model: | DigiWATCHPORT_H |
Serial Number: | W62330940 |
Input Connection: | USB |
PTDaemon Version: | 1.9.2 (3976349f; 2020-12-08) |
Setup Description: | 50 mm in front of SUT main intake |
Benchmark | Threads | Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SPECspeed®2017_int_base | 15.8 | ||||||||||||||||||
SPECspeed®2017_int_energy_base | 86.0 | ||||||||||||||||||
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | |||||||||||||||||||
600.perlbench_s | 32 | 182 | 9.74 | 36.1 | 53.3 | 198 | 199 | 183 | 9.68 | 36.3 | 53.1 | 198 | 200 | 184 | 9.66 | 36.4 | 52.9 | 198 | 199 |
602.gcc_s | 32 | 253 | 15.7 | 50.2 | 86.2 | 198 | 201 | 251 | 15.8 | 49.8 | 87.0 | 198 | 201 | 251 | 15.9 | 49.7 | 87.1 | 198 | 201 |
605.mcf_s | 32 | 209 | 22.5 | 41.6 | 124 | 199 | 201 | 209 | 22.6 | 41.5 | 124 | 198 | 200 | 210 | 22.5 | 41.6 | 124 | 198 | 200 |
620.omnetpp_s | 32 | 149 | 10.9 | 29.4 | 60.3 | 197 | 198 | 148 | 11.0 | 29.2 | 60.7 | 197 | 199 | 149 | 10.9 | 29.4 | 60.4 | 197 | 198 |
623.xalancbmk_s | 32 | 63.6 | 22.3 | 12.6 | 123 | 198 | 201 | 63.6 | 22.3 | 12.6 | 122 | 198 | 201 | 64.0 | 22.2 | 12.6 | 122 | 197 | 201 |
625.x264_s | 32 | 70.7 | 24.9 | 13.9 | 138 | 197 | 199 | 70.8 | 24.9 | 13.9 | 138 | 197 | 199 | 70.7 | 25.0 | 13.9 | 138 | 197 | 199 |
631.deepsjeng_s | 32 | 186 | 7.72 | 36.5 | 42.7 | 197 | 198 | 185 | 7.74 | 36.4 | 42.7 | 197 | 199 | 186 | 7.69 | 36.7 | 42.5 | 197 | 198 |
641.leela_s | 32 | 246 | 6.92 | 48.4 | 38.1 | 197 | 198 | 247 | 6.90 | 48.6 | 38.0 | 197 | 197 | 247 | 6.92 | 48.4 | 38.1 | 196 | 198 |
648.exchange2_s | 32 | 95.3 | 30.9 | 18.8 | 171 | 197 | 200 | 95.3 | 30.9 | 18.8 | 170 | 197 | 199 | 95.4 | 30.8 | 18.8 | 170 | 197 | 200 |
657.xz_s | 32 | 216 | 28.6 | 49.3 | 136 | 228 | 355 | 217 | 28.5 | 49.5 | 136 | 228 | 356 | 216 | 28.7 | 49.1 | 137 | 228 | 363 |
Benchmark | Threads | Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SPECspeed®2017_int_peak | 16.1 | ||||||||||||||||||
SPECspeed®2017_int_energy_peak | 87.4 | ||||||||||||||||||
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | |||||||||||||||||||
600.perlbench_s | 1 | 181 | 9.78 | 36.1 | 53.3 | 199 | 200 | 181 | 9.80 | 35.9 | 53.6 | 198 | 200 | 182 | 9.77 | 36.0 | 53.4 | 198 | 200 |
602.gcc_s | 32 | 253 | 15.7 | 50.2 | 86.2 | 198 | 201 | 251 | 15.8 | 49.8 | 87.0 | 198 | 201 | 251 | 15.9 | 49.7 | 87.1 | 198 | 201 |
605.mcf_s | 1 | 201 | 23.5 | 39.9 | 129 | 199 | 202 | 200 | 23.6 | 39.9 | 129 | 199 | 202 | 201 | 23.5 | 39.9 | 129 | 199 | 202 |
620.omnetpp_s | 1 | 149 | 11.0 | 29.3 | 60.5 | 197 | 199 | 148 | 11.0 | 29.2 | 60.8 | 198 | 199 | 148 | 11.0 | 29.1 | 61.0 | 197 | 199 |
623.xalancbmk_s | 1 | 58.9 | 24.1 | 11.6 | 132 | 197 | 201 | 58.7 | 24.1 | 11.6 | 133 | 198 | 201 | 58.6 | 24.2 | 11.6 | 133 | 197 | 201 |
625.x264_s | 32 | 70.7 | 24.9 | 13.9 | 138 | 197 | 199 | 70.8 | 24.9 | 13.9 | 138 | 197 | 199 | 70.7 | 25.0 | 13.9 | 138 | 197 | 199 |
631.deepsjeng_s | 32 | 186 | 7.72 | 36.5 | 42.7 | 197 | 198 | 185 | 7.74 | 36.4 | 42.7 | 197 | 199 | 186 | 7.69 | 36.7 | 42.5 | 197 | 198 |
641.leela_s | 32 | 246 | 6.92 | 48.4 | 38.1 | 197 | 198 | 247 | 6.90 | 48.6 | 38.0 | 197 | 197 | 247 | 6.92 | 48.4 | 38.1 | 196 | 198 |
648.exchange2_s | 32 | 95.3 | 30.9 | 18.8 | 171 | 197 | 200 | 95.3 | 30.9 | 18.8 | 170 | 197 | 199 | 95.4 | 30.8 | 18.8 | 170 | 197 | 200 |
657.xz_s | 64 | 211 | 29.3 | 48.4 | 139 | 229 | 420 | 210 | 29.4 | 48.1 | 140 | 229 | 422 | 210 | 29.5 | 48.1 | 140 | 229 | 418 |
The AMD64 AOCC Compiler Suite is available at http://developer.amd.com/amd-aocc/
The config file option 'submit' was used. 'numactl' was used to bind copies to the cores. See the configuration file for details.
'ulimit -s unlimited' was used to set environment stack size limit 'ulimit -l 2097152' was used to set environment locked pages in memory limit runcpu command invoked through numactl i.e.: numactl --interleave=all runcpu <etc> To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root. To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root. To free node-local memory and avoid remote memory usage, 'sysctl -w vm.zone_reclaim_mode=1' run as root. To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root. To disable address space layout randomization (ASLR) to reduce run-to-run variability, 'sysctl -w kernel.randomize_va_space=0' run as root. To enable Transparent Hugepages (THP) for all allocations, 'echo always > /sys/kernel/mm/transparent_hugepage/enabled' and 'echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root.
Environment variables set by runcpu before the start of the run: GOMP_CPU_AFFINITY = "0-63" LD_LIBRARY_PATH = "/home/cpu2017-1.1.8-amd-aocc400-genoa-B1b/amd_speed_aocc400_genoa_B_lib /lib:" LIBOMP_NUM_HIDDEN_HELPER_THREADS = "0" MALLOC_CONF = "oversize_threshold:0,retain:true" OMP_DYNAMIC = "false" OMP_SCHEDULE = "static" OMP_STACKSIZE = "128M" OMP_THREAD_LIMIT = "64" Environment variables set by runcpu during the 600.perlbench_s peak run: GOMP_CPU_AFFINITY = "15" Environment variables set by runcpu during the 605.mcf_s peak run: GOMP_CPU_AFFINITY = "15" Environment variables set by runcpu during the 620.omnetpp_s peak run: GOMP_CPU_AFFINITY = "15" Environment variables set by runcpu during the 623.xalancbmk_s peak run: GOMP_CPU_AFFINITY = "15" Environment variables set by runcpu during the 657.xz_s peak run: GOMP_CPU_AFFINITY = "0-63" LIBOMP_NUM_HIDDEN_HELPER_THREADS = "8"
Binaries were compiled on a system with 2x AMD EPYC 9174F CPU + 1.5TiB Memory using RHEL 8.6 NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented.
BIOS configuration: Operating Mode set to Maximum Performance and then set it to Custom Mode NUMA Nodes per Socket set to NPS4 Determinism Slider set to Performance DRAM Scrub Time set to Disabled ACPI SRAT L3 Cache as NUMA Domain set to Enabled 4-Link xGMI Max Speed set to Minimum xGMI Maximum Link Width set to 0 Memory Speed set to 3600MHz DF P-States set to P3 Sysinfo program /home/cpu2017-1.1.8-amd-aocc400-genoa-B1b/bin/sysinfo Rev: r6622 of 2021-04-07 982a61ec0915b55891ef0e16acafc64d running on localhost.localdomain Mon Jan 9 16:24:20 2023 SUT (System Under Test) info as seen by some common utilities. For more information on this section, see https://www.spec.org/cpu2017/Docs/config.html#sysinfo From /proc/cpuinfo model name : AMD EPYC 9174F 16-Core Processor 2 "physical id"s (chips) 64 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 16 siblings : 32 physical 0: cores 0 1 16 17 24 25 32 33 40 41 48 49 56 57 physical 1: cores 0 1 16 17 24 25 32 33 40 41 48 49 56 57 From lscpu from util-linux 2.37.4: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Address sizes: 52 bits physical, 57 bits virtual Byte Order: Little Endian CPU(s): 64 On-line CPU(s) list: 0-63 Vendor ID: AuthenticAMD BIOS Vendor ID: Advanced Micro Devices, Inc. Model name: AMD EPYC 9174F 16-Core Processor BIOS Model name: AMD EPYC 9174F 16-Core Processor CPU family: 25 Model: 17 Thread(s) per core: 2 Core(s) per socket: 16 Socket(s): 2 Stepping: 1 Frequency boost: enabled CPU max MHz: 4408.2998 CPU min MHz: 1500.0000 BogoMIPS: 8187.57 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb cat_l3 cdp_l3 invpcid_single hw_pstate ssbd mba ibrs ibpb stibp vmmcall fsgsbase bmi1 avx2 smep bmi2 erms invpcid cqm rdt_a avx512f avx512dq rdseed adx smap avx512ifma clflushopt clwb avx512cd sha_ni avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local avx512_bf16 clzero irperf xsaveerptr rdpru wbnoinvd amd_ppin arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif v_spec_ctrl avx512vbmi umip pku ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg avx512_vpopcntdq la57 rdpid overflow_recov succor smca fsrm flush_l1d Virtualization: AMD-V L1d cache: 1 MiB (32 instances) L1i cache: 1 MiB (32 instances) L2 cache: 32 MiB (32 instances) L3 cache: 512 MiB (16 instances) NUMA node(s): 16 NUMA node0 CPU(s): 0,1,32,33 NUMA node1 CPU(s): 2,3,34,35 NUMA node2 CPU(s): 4,5,36,37 NUMA node3 CPU(s): 6,7,38,39 NUMA node4 CPU(s): 8,9,40,41 NUMA node5 CPU(s): 10,11,42,43 NUMA node6 CPU(s): 12,13,44,45 NUMA node7 CPU(s): 14,15,46,47 NUMA node8 CPU(s): 16,17,48,49 NUMA node9 CPU(s): 18,19,50,51 NUMA node10 CPU(s): 20,21,52,53 NUMA node11 CPU(s): 22,23,54,55 NUMA node12 CPU(s): 24,25,56,57 NUMA node13 CPU(s): 26,27,58,59 NUMA node14 CPU(s): 28,29,60,61 NUMA node15 CPU(s): 30,31,62,63 Vulnerability Itlb multihit: Not affected Vulnerability L1tf: Not affected Vulnerability Mds: Not affected Vulnerability Meltdown: Not affected Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization Vulnerability Spectre v2: Mitigation; Retpolines, IBPB conditional, IBRS_FW, STIBP always-on, RSB filling Vulnerability Srbds: Not affected Vulnerability Tsx async abort: Not affected From lscpu --cache: NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE L1d 32K 1M 8 Data 1 64 1 64 L1i 32K 1M 8 Instruction 1 64 1 64 L2 1M 32M 8 Unified 2 2048 1 64 L3 32M 512M 16 Unified 3 32768 1 64 /proc/cpuinfo cache data cache size : 1024 KB From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a physical chip. available: 16 nodes (0-15) node 0 cpus: 0 1 32 33 node 0 size: 24002 MB node 0 free: 23460 MB node 1 cpus: 2 3 34 35 node 1 size: 24185 MB node 1 free: 23819 MB node 2 cpus: 4 5 36 37 node 2 size: 24148 MB node 2 free: 23939 MB node 3 cpus: 6 7 38 39 node 3 size: 24185 MB node 3 free: 23981 MB node 4 cpus: 8 9 40 41 node 4 size: 24185 MB node 4 free: 23974 MB node 5 cpus: 10 11 42 43 node 5 size: 24185 MB node 5 free: 23965 MB node 6 cpus: 12 13 44 45 node 6 size: 24185 MB node 6 free: 23975 MB node 7 cpus: 14 15 46 47 node 7 size: 24185 MB node 7 free: 23992 MB node 8 cpus: 16 17 48 49 node 8 size: 24185 MB node 8 free: 23989 MB node 9 cpus: 18 19 50 51 node 9 size: 24185 MB node 9 free: 23992 MB node 10 cpus: 20 21 52 53 node 10 size: 24185 MB node 10 free: 23978 MB node 11 cpus: 22 23 54 55 node 11 size: 24185 MB node 11 free: 23987 MB node 12 cpus: 24 25 56 57 node 12 size: 24185 MB node 12 free: 23994 MB node 13 cpus: 26 27 58 59 node 13 size: 24185 MB node 13 free: 23991 MB node 14 cpus: 28 29 60 61 node 14 size: 24185 MB node 14 free: 23981 MB node 15 cpus: 30 31 62 63 node 15 size: 24113 MB node 15 free: 23910 MB node distances: node 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0: 10 11 12 12 12 12 12 12 32 32 32 32 32 32 32 32 1: 11 10 12 12 12 12 12 12 32 32 32 32 32 32 32 32 2: 12 12 10 11 12 12 12 12 32 32 32 32 32 32 32 32 3: 12 12 11 10 12 12 12 12 32 32 32 32 32 32 32 32 4: 12 12 12 12 10 11 12 12 32 32 32 32 32 32 32 32 5: 12 12 12 12 11 10 12 12 32 32 32 32 32 32 32 32 6: 12 12 12 12 12 12 10 11 32 32 32 32 32 32 32 32 7: 12 12 12 12 12 12 11 10 32 32 32 32 32 32 32 32 8: 32 32 32 32 32 32 32 32 10 11 12 12 12 12 12 12 9: 32 32 32 32 32 32 32 32 11 10 12 12 12 12 12 12 10: 32 32 32 32 32 32 32 32 12 12 10 11 12 12 12 12 11: 32 32 32 32 32 32 32 32 12 12 11 10 12 12 12 12 12: 32 32 32 32 32 32 32 32 12 12 12 12 10 11 12 12 13: 32 32 32 32 32 32 32 32 12 12 12 12 11 10 12 12 14: 32 32 32 32 32 32 32 32 12 12 12 12 12 12 10 11 15: 32 32 32 32 32 32 32 32 12 12 12 12 12 12 11 10 From /proc/meminfo MemTotal: 395952944 kB HugePages_Total: 0 Hugepagesize: 2048 kB /sbin/tuned-adm active Current active profile: throughput-performance /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor has performance From /etc/*release* /etc/*version* os-release: NAME="Red Hat Enterprise Linux" VERSION="9.0 (Plow)" ID="rhel" ID_LIKE="fedora" VERSION_ID="9.0" PLATFORM_ID="platform:el9" PRETTY_NAME="Red Hat Enterprise Linux 9.0 (Plow)" ANSI_COLOR="0;31" redhat-release: Red Hat Enterprise Linux release 9.0 (Plow) system-release: Red Hat Enterprise Linux release 9.0 (Plow) system-release-cpe: cpe:/o:redhat:enterprise_linux:9::baseos uname -a: Linux localhost.localdomain 5.14.0-70.13.1.el9_0.x86_64 #1 SMP PREEMPT Thu Apr 14 12:42:38 EDT 2022 x86_64 x86_64 x86_64 GNU/Linux Kernel self-reported vulnerability status: CVE-2018-12207 (iTLB Multihit): Not affected CVE-2018-3620 (L1 Terminal Fault): Not affected Microarchitectural Data Sampling: Not affected CVE-2017-5754 (Meltdown): Not affected CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store Bypass disabled via prctl CVE-2017-5753 (Spectre variant 1): Mitigation: usercopy/swapgs barriers and __user pointer sanitization CVE-2017-5715 (Spectre variant 2): Mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: always-on, RSB filling CVE-2020-0543 (Special Register Buffer Data Sampling): Not affected CVE-2019-11135 (TSX Asynchronous Abort): Not affected run-level 3 Jan 9 15:11 SPEC is set to: /home/cpu2017-1.1.8-amd-aocc400-genoa-B1b Filesystem Type Size Used Avail Use% Mounted on /dev/sda4 xfs 372G 19G 354G 5% /home From /sys/devices/virtual/dmi/id Vendor: Lenovo Product: ThinkSystem SR665 V3 MB,Genoa,Kauai,DDR5,Kauai,2U Product Family: ThinkSystem Serial: 1234567890 Additional information from dmidecode 3.3 follows. WARNING: Use caution when you interpret this section. The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. Memory: 24x Micron Technology MTC10F1084S1RC48BA1 16 GB 1 rank 4800, configured at 3600 BIOS: BIOS Vendor: Lenovo BIOS Version: KAE105L-1.20 BIOS Date: 12/29/2022 BIOS Revision: 1.20 Firmware Revision: 1.20 (End of data from sysinfo program)
============================================================================== C | 600.perlbench_s(base, peak) 602.gcc_s(base, peak) 605.mcf_s(base, | peak) 625.x264_s(base, peak) 657.xz_s(base, peak) ------------------------------------------------------------------------------ AMD clang version 14.0.6 (CLANG: AOCC_4.0.0-Build#389 2022_10_07) (based on LLVM Mirror.Version.14.0.6) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /opt/AMD/aocc/aocc-compiler-rel-4.0-3206-389/bin ------------------------------------------------------------------------------ ============================================================================== C++ | 620.omnetpp_s(base, peak) 623.xalancbmk_s(base, peak) | 631.deepsjeng_s(base, peak) 641.leela_s(base, peak) ------------------------------------------------------------------------------ AMD clang version 14.0.6 (CLANG: AOCC_4.0.0-Build#389 2022_10_07) (based on LLVM Mirror.Version.14.0.6) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /opt/AMD/aocc/aocc-compiler-rel-4.0-3206-389/bin ------------------------------------------------------------------------------ ============================================================================== Fortran | 648.exchange2_s(base, peak) ------------------------------------------------------------------------------ AMD clang version 14.0.6 (CLANG: AOCC_4.0.0-Build#389 2022_10_07) (based on LLVM Mirror.Version.14.0.6) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /opt/AMD/aocc/aocc-compiler-rel-4.0-3206-389/bin ------------------------------------------------------------------------------
600.perlbench_s: | -DSPEC_LINUX_X64 -DSPEC_LP64 |
602.gcc_s: | -DSPEC_LP64 |
605.mcf_s: | -DSPEC_LP64 |
620.omnetpp_s: | -DSPEC_LP64 |
623.xalancbmk_s: | -DSPEC_LINUX -DSPEC_LP64 |
625.x264_s: | -DSPEC_LP64 |
631.deepsjeng_s: | -DSPEC_LP64 |
641.leela_s: | -DSPEC_LP64 |
648.exchange2_s: | -DSPEC_LP64 |
657.xz_s: | -DSPEC_LP64 |
-Wno-return-type -Wno-unused-command-line-argument |
-Wno-unused-command-line-argument |
-Wno-unused-command-line-argument |
Same as Base Portability Flags
600.perlbench_s: | -m64 -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 -Wl,-mllvm -Wl,-reduce-array-computations=3 -Wl,-allow-multiple-definition -Ofast -march=znver4 -fveclib=AMDLIBM -ffast-math -fopenmp -flto -fstruct-layout=9 -mllvm -unroll-threshold=50 -fremap-arrays -fstrip-mining -mllvm -inline-threshold=1000 -mllvm -reduce-array-computations=3 -DSPEC_OPENMP -zopt -fopenmp=libomp -lomp -lamdlibm -lamdalloc -lflang |
602.gcc_s: | basepeak = yes |
605.mcf_s: | Same as 600.perlbench_s |
625.x264_s: | basepeak = yes |
657.xz_s: | Same as 600.perlbench_s |
648.exchange2_s: | basepeak = yes |