This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp_rate95 | 159 |
---|---|
SPECfp_rate_base95 | 136 |
Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|---|
101.tomcatv | 2 | 345 | 193 | 2 | 311 | 214 |
102.swim | 2 | 579 | 267 | 2 | 506 | 306 |
103.su2cor | 2 | 278 | 90.7 | 2 | 268 | 94.0 |
104.hydro2d | 2 | 582 | 74.3 | 2 | 558 | 77.5 |
107.mgrid | 2 | 326 | 138 | 2 | 323 | 139 |
110.applu | 2 | 453 | 87.5 | 2 | 347 | 114 |
125.turb3d | 2 | 580 | 127 | 2 | 559 | 132 |
141.apsi | 2 | 207 | 183 | 2 | 199 | 189 |
145.fpppp | 2 | 1359 | 127 | 2 | 660 | 262 |
146.wave5 | 2 | 300 | 180 | 2 | 260 | 208 |
SPECfp_rate_base95 | 136 | |||||
SPECfp_rate95 | 159 |
Tester Information:
SPEC License #: | 6 |
---|---|
Tested By: | Sun, Palo Alto |
Test Date: | Jun-98 |
Hardware Avail: | Jun-98 |
Software Avail: | Oct-98 |
Hardware Information:
Model Name: | Ultra 10 333MHz |
---|---|
CPU: | 333 MHz UltraSPARC-IIi |
FPU: | Integrated |
Number of CPU(s): | 1 |
Primary Cache: | 16KBI+16KBD on chip |
Secondary Cache: | 2MB(I+D) off chip |
Other Cache: | None |
Memory: | 512MB |
Disk Subsystem: | 2 x 4.01GB |
Other Hardware: | Fast Ethernet |
System clock frequency: 111 MHz |
Software Information:
Operating System: | Solaris 2.6 3/98 |
---|---|
Compiler: | Sun f77 SF775.0 EFT1 (8/98) |
File System: | UFS |
System State: | Single User |
Kernel Extensions: | consistent_coloring=1 |
Notes:
P1= -xprofile=collect:`pwd`/../feedback P2= -xprofile=use:`pwd`/../feedback BCOPY=-Qoption iropt -O4+bcopy; INV=-Qoption iropt -O4+invccexp; BMR=-Qoption iropt -O4+bmerge Baseline: -fast -xarch=v8plusa -fsimple=2 -xprefetch Peak: -fast -xO4 -xarch=v8plusa -xchip=ultra 101.tomcatv: -fast -xarch=v8plusa -xpad=local:23 -xprefetch -Qoption iropt -O4+data_access 102.swim: -fast -xarch=v8plusa -xpad=common:15 -xprefetch -fsimple=2 103.su2cor: -fast -xarch=v8plusa -xvector -Qoption cg -Qms_pipe+nfll=5 -fsimple=2 ${BCOPY} 103.su2cor: PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2} 104.hydro2d: -fast -xarch=v8plusa -xprefetch -Qoption iropt -O4+pde -fsimple=2 104.hydro2d: PASS1= ${P1}; PASS2= ${P2} 107.mgrid: -fast -xarch=v8plusa -xprefetch -fsimple=2 ${BCOPY} 107.mgrid: PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2} 110.applu: -fast -xarch=v8plusa -Qoption iropt -O4+scalarrep+ddint+perfect+loop_dist+pde+algassoc,-Mt6000,-Mr20000,-Ma140,-ldstr -fsimple=2 125.turb3d: -fast -xarch=v8plusa -stackvar -xpad -fsimple=2 -Qoption iropt -O4+bcopy ${INV} -xvector=yes 125.turb3d: PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2} 141.apsi: -fast -xarch=v8plusa -xchip=ultra3 -fsimple=2 -stackvar -Qoption iropt -Si36 ${INV} -Qoption iropt -O4+algassoc 141.apsi: PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2} 145.fpppp: -fast -xarch=v8plusa -xO5 -xsafe=mem -fsimple=2 -nodepend -Qoption iropt -O4+algassoc -Qoption iropt -reroll=1 145.fpppp: PASS1= ${P1}; PASS2= ${P2} 146.wave5: -fast -xarch=v8plusa -stackvar -fsimple=2 -Qoption iropt -O4+unroll ${BCOPY} Shell limits: # ulimit -n 1024 or % limit descriptors 1024 Config file: ultra10_fp.cfg
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Fri Aug 14 17:27:42 1998First published at SPEC.org on 04-Aug-1998