# Invocation command line: # /home/HPC2021v1.1.7/bin/harness/runhpc --reportable --config=Intel4S.cfg --tune=base --pmodel=MPI --define model=mpi --define THREADS=1 --define RANKS=480 --size=ref --define NRNK=480 --iterations=3 tiny small # output_root was not used for this run ############################################################################ # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 build_in_build_dir=0 # build in run dir strict_rundir_verify = 1 %ifndef %{label} # IF acctype is not set use mpi % define label icx_I204_IMPI204 %endif %ifndef %{model} # IF acctype is not set use mpi % define model mpi %endif teeout = yes makeflags=-j 40 flagsurl000=http://www.spec.org/hpc2021/flags/Intel_compiler_flags.2022-11-10.xml ###################################################################### # The header section of the config file. Must appear # before any instances of "section markers" (see below) # # ext = how the binaries you generated will be identified # tune = specify "base" or "peak" or "all" label = %{label}_%{model} tune = base output_format = text use_submit_for_speed = 1 default: AR = ar ARFLAGS = cr CC = mpiicc -cc=icx CXX = mpiicpc -cxx=icx FC = mpiifort -fc=ifx system_class = SMP sw_other = None sw_compiler = Intel oneAPI Compiler 2022.1.0 sw_mpi_library = Intel MPI Library for Linux OS, Build 20220227 sw_mpi_other = None test_sponsor = Lenovo Global Technology license_num = 28 showtimer = 0 tester = Lenovo Global Technology hw_avail = Aug-2023 sw_avail = Jun-2023 prepared_by = Jimmy Cheng system_vendor = Lenovo Global Technology system_name = ThinkSystem SR860 V3 (Intel Xeon Platinum 8490H, 1.90 GHz) node_compute_sw_accel_driver = None node_compute_hw_accel_vendor = None node_compute_hw_accel_type = None node_compute_hw_accel_model = None node_compute_hw_accel_ecc = None node_compute_hw_accel_desc = None node_compute_hw_accel_count = None node_compute_hw_accel_connect = None node_compute_syslbl = ThinkSystem SR860 V3 node_compute_sw_state = Multi-user, run level 3 node_compute_sw_sharedfile = None node_compute_sw_other = None node_compute_sw_localfile = xfs node_compute_purpose = Compute node_compute_order = 1 node_compute_hw_vendor = Lenovo Global Technology node_compute_hw_scache = 2 MB I+D on chip per core node_compute_hw_pcache = 32 KB I + 32 KB D on chip per core node_compute_hw_tcache = 112.5 MB I+D on chip per chip node_compute_hw_other = None node_compute_hw_ocache = None node_compute_hw_nthreadspercore = 2 node_compute_hw_ncpuorder = 4 chips node_compute_hw_ncoresperchip = 60 node_compute_hw_ncores = 240 node_compute_hw_nchips = 4 node_compute_hw_model = ThinkSystem SR860 V3 node_compute_hw_memory = 2 TB (32 x 64 GB 2Rx4 PC5-4800V) node_compute_hw_disk = 1x ThinkSystem 2.5" 5300 480GB SSD node_compute_hw_cpu_name = Intel Xeon Platinum 8490H node_compute_hw_cpu_mhz = 1900 node_compute_hw_cpu_char = Intel Turbo Boost Technology up to 3.5 GHz node_compute_hw_adapter_fs_slot_type = None node_compute_hw_adapter_fs_ports_used = 0 node_compute_hw_adapter_fs_model = None node_compute_hw_adapter_fs_interconnect = None node_compute_hw_adapter_fs_firmware = None node_compute_hw_adapter_fs_driver = None node_compute_hw_adapter_fs_data_rate = None node_compute_hw_adapter_fs_count = 0 node_compute_count = 1 CC_VERSION_OPTION = -V -c CXX_VERSION_OPTION = -V -c FC_VERSION_OPTION = -V -c %if %{VEC} eq 'novec' vec=-no-vec %elif %{VEC} eq 'avx2' vec=-xCORE-AVX2 %elif %{VEC} eq 'avx512' vec=-xCORE-AVX512 %elif %{VEC} eq 'avx512_high' vec=-xCORE-AVX512 -qopt-zmm-usage=high %else vec=-xCORE-AVX512 %endif default=base,peak=default: OPTIMIZE = -Ofast -mprefer-vector-width=512 -xCORE-AVX512 -ipo #-no-prec-div COPTIMIZE = -ansi-alias CXXOPTIMIZE = -ansi-alias FOPTIMIZE = -nostandard-realloc-lhs -align array64byte PORTABILITY = -lstdc++ %if %{model} eq 'mpi' submit = mpirun -hostfile $[top]/1node -np $ranks -ppn %{NRNK} $command %else %{model} eq 'omp' # submit = mpiexec --allow-run-as-root -host 192.168.99.15:24,192.168.99.16:24 -np $ranks $command # submit = mpiexec -hosts 192.168.99.15,192.168.99.16,192.168.99.31,192.168.99.32 -np $ranks -genv OMP_NUM_THREADS=$threads -ppn %{NRNK} $command submit = mpiexec -hostfile $[top]/1node -np $ranks -genv OMP_NUM_THREADS=$threads -ppn %{NRNK} $command %endif %if %{model} eq 'omp' pmodel=OMP OPTIMIZE += -fiopenmp %endif default=base=default: ranks = %{RANKS} threads = %{THREADS} ppn = %{NRNK} #default=peak=default: basepeak=0 613.soma_s=default=default: %if %{model} eq 'omp' PORTABILITY += -DSPEC_NO_VAR_ARRAY_REDUCE %endif 513.soma_t=default=default: %if %{model} eq 'omp' PORTABILITY += -DSPEC_NO_VAR_ARRAY_REDUCE %endif 505.lbm_t=peak: basepeak=1 513.soma_t=peak: basepeak=1 518.tealeaf_t=peak: ranks=24 threads=8 pmodel=OMP 519.clvleaf_t=peak: ranks=24 threads=8 pmodel=OMP 521.miniswp_t=peak: ranks=4 threads=96 pmodel=OMP 528.pot3d_t=peak: basepeak=1 532.sph_exa_t=peak: basepeak=1 534.hpgmgfv_t=peak: basepeak=1 535.weather_t=peak: basepeak=1 # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: node_compute_sw_os000 = Red Hat Enterprise Linux Server release 8.6, node_compute_sw_os001 = Kernel 4.18.0-372.9.1.el8.x86_64