This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp95 | 3.55 |
---|---|
SPECfp_base95 | 3.49 |
Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|
101.tomcatv | 3700 | 643 | 5.75 | 638 | 5.80 |
102.swim | 8600 | 893 | 9.63 | 927 | 9.28 |
103.su2cor | 1400 | 790 | 1.77 | 813 | 1.72 |
104.hydro2d | 2400 | 1180 | 2.03 | 1175 | 2.04 |
107.mgrid | 2500 | 838 | 2.98 | 713 | 3.51 |
110.applu | 2200 | 890 | 2.47 | 885 | 2.49 |
125.turb3d | 4100 | 1412 | 2.90 | 1362 | 3.01 |
141.apsi | 2100 | 731 | 2.87 | 733 | 2.86 |
145.fpppp | 9600 | 2154 | 4.46 | 2151 | 4.46 |
146.wave5 | 3000 | 618 | 4.85 | 597 | 5.03 |
SPECfp_base95 | 3.49 | ||||
SPECfp95 | 3.55 |
Tester Information:
SPEC License #: | 3 |
---|---|
Tested By: | HP Cupertino, CA |
Test Date: | Aug-96 |
Hardware Avail: | Jan-94 |
Software Avail: | Sep-96 |
Hardware Information:
Model Name: | HP 9000 Series 700 Model 712/80 |
---|---|
CPU: | 80 MHz PA-RISC 7100LC |
FPU: | Integrated |
Number of CPU(s): | 1 |
Primary Cache: | 256KB(I+D) off-chip |
Secondary Cache: | None |
Other Cache: | None |
Memory: | 64MB |
Disk Subsystem: | 1 Fast/Wide SCSI-2 1.0 GB |
Other Hardware: | None |
Software Information:
Operating System: | HP-UX B.10.20 |
---|---|
Compiler: | HP FORTRAN B3906AA B.10.20.01 |
File System: | HP-UX |
System State: | Multi-user |
Notes:
Base Flags: All: +Oall Linker Flag: All: -Wl, -aarchive Peak Flags: 101: +Oall +Oloop_unroll +Onolimit +Oregionsched +Ovectorize +I/+P 102: +Oall +Ocache_pad_common +Ofltacc +Oinline_budget=256000 +Olibcalls +Oloop_transform +I/+P +Onofastaccess +Onoinitcheck +Onoloop_unroll +Onosize +Oregionsched +I/+P 103: +Oall +Ofastaccess +Olibcalls +Oloop_unroll +Onofltacc +Onolimit +I/+P 104: +Oall +Oloop_unroll +Owhole_program_mode +I/+P 107: +O3 +Oinline_budget=256000 +Oloop_unroll +Onofltacc +Onolimit 110: +Oall +Onofastaccess 125: +O3 +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll 141: +Oall +Onofastaccess 145: +Oall 146: +O3 +Olibcalls +Oloop_unroll +Onofltacc +Onolimit Linker Flag: All: -Wl, -aarchive Note: The +I/+P indicates the use of profile based optimization.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Tue Oct 1 14:41:47 PDT 1996First published at SPEC.org on 01-Oct-1996