This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp_rate95 | 36.3 |
---|---|
SPECfp_rate_base95 | 35.7 |
Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|---|
101.tomcatv | 1 | 583 | 57.1 | 1 | 577 | 57.7 |
102.swim | 1 | 805 | 96.1 | 1 | 841 | 92.1 |
103.su2cor | 1 | 722 | 17.4 | 1 | 738 | 17.1 |
104.hydro2d | 1 | 1081 | 20.0 | 1 | 1075 | 20.1 |
107.mgrid | 1 | 737 | 30.5 | 1 | 638 | 35.3 |
110.applu | 1 | 769 | 25.7 | 1 | 766 | 25.8 |
125.turb3d | 1 | 1195 | 30.9 | 1 | 1159 | 31.8 |
141.apsi | 1 | 662 | 28.6 | 1 | 655 | 28.9 |
145.fpppp | 1 | 1722 | 50.2 | 1 | 1718 | 50.3 |
146.wave5 | 1 | 541 | 49.9 | 1 | 524 | 51.5 |
SPECfp_rate_base95 | 35.7 | |||||
SPECfp_rate95 | 36.3 |
Tester Information:
SPEC License #: | 3 |
---|---|
Tested By: | HP Cupertino, CA |
Test Date: | Aug-96 |
Hardware Avail: | Jan-94 |
Software Avail: | Sep-96 |
Hardware Information:
Model Name: | HP 9000 Series 700 Model 712/100 |
---|---|
CPU: | 100 MHz PA-RISC 7100LC |
FPU: | Integrated |
Number of CPU(s): | 1 |
Primary Cache: | 256KB(I+D) off-chip |
Secondary Cache: | None |
Other Cache: | None |
Memory: | 64MB |
Disk Subsystem: | 1 Fast/Wide SCSI-2 1.0 GB |
Other Hardware: | None |
Software Information:
Operating System: | HP-UX B.10.20 |
---|---|
Compiler: | HP FORTRAN B3906AA B.10.20.01 |
File System: | HP-UX |
System State: | Multi-user |
Notes:
Base Flags: All: +Oall Linker Flag: All: -Wl, -aarchive Peak Flags: 101: +Oall +Oloop_unroll +Onolimit +Oregionsched +Ovectorize +I/+P 102: +Oall +Ocache_pad_common +Ofltacc +Oinline_budget=256000 +Olibcalls +Oloop_transform +I/+P +Onofastaccess +Onoinitcheck +Onoloop_unroll +Onosize +Oregionsched +I/+P 103: +Oall +Ofastaccess +Olibcalls +Oloop_unroll +Onofltacc +Onolimit +I/+P 104: +Oall +Oloop_unroll +Owhole_program_mode +I/+P 107: +O3 +Oinline_budget=256000 +Oloop_unroll +Onofltacc +Onolimit 110: +Oall +Onofastaccess 125: +O3 +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll 141: +Oall +Onofastaccess 145: +Oall 146: +O3 +Olibcalls +Oloop_unroll +Onofltacc +Onolimit Linker Flag: All: -Wl, -aarchive Note: The +I/+P indicates the use of profile based optimization.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Tue Oct 1 14:42:00 PDT 1996First published at SPEC.org on 01-Oct-1996