Dell Inc. PowerEdge R840 (Intel Xeon Platinum 8180 2.50 GHz) | SPECpower_ssj2008 = 11,872 overall ssj_ops/watt | ||||
Test Sponsor: | Dell Inc. | SPEC License #: | 55 | Test Method: | Single Node |
Tested By: | Dell Inc. | Test Location: | Round Rock, TX, USA | Test Date: | Jun 18, 2018 |
Hardware Availability: | Jun-2018 | Software Availability: | Nov-2016 | Publication: | Jul 5, 2018 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.7% | 11,546,450 | 939 | 12,292 |
90% | 89.8% | 10,410,491 | 839 | 12,406 |
80% | 80.0% | 9,269,726 | 710 | 13,055 |
70% | 70.0% | 8,115,275 | 592 | 13,717 |
60% | 60.0% | 6,951,588 | 511 | 13,613 |
50% | 50.0% | 5,789,642 | 442 | 13,108 |
40% | 40.0% | 4,630,544 | 383 | 12,080 |
30% | 30.0% | 3,471,869 | 333 | 10,413 |
20% | 20.0% | 2,315,782 | 286 | 8,090 |
10% | 10.0% | 1,157,942 | 237 | 4,891 |
Active Idle | 0 | 89.8 | 0 | |
∑ssj_ops / ∑power = | 11,872 |
Set Identifier: | sut |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | PowerEdge R840 |
Hardware | |
---|---|
Hardware Vendor: | Dell Inc. |
Model: | PowerEdge R840 (Intel Xeon Platinum 8180 2.50 GHz) |
Form Factor: | 2U |
CPU Name: | Intel Xeon Platinum 8180 2.50 GHz |
CPU Characteristics: | 28 core, 2.50 GHz, 38.5 MB L3 Cache |
CPU Frequency (MHz): | 2500 |
CPU(s) Enabled: | 112 cores, 4 chips, 28 cores/chip |
Hardware Threads: | 224 (2 / core) |
CPU(s) Orderable: | 2,4 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 1 MB I+D on chip per core |
Tertiary Cache: | 39424 KB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 384 |
# and size of DIMM: | 24 x 16 GB |
Memory Details: | 16GB 2Rx8 PC4-2666V; Dell SKU 370-ADND, Slots A1-6,B1-6,C1-6,D1-6 populated. |
Power Supply Quantity and Rating (W): | 1 x 1600 |
Power Supply Details: | Dell SKU 450-AFMR |
Disk Drive: | 1 x 120 GB SATA SSD, Dell SKU 400-ASEG |
Disk Controller: | Native Chipset SATA |
# and type of Network Interface Cards (NICs) Installed: | 1 x quad-port Broadcom 5720, Dell SKU 540-BCEN |
NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Balanced power plan in OS |
Operating System (OS): | Microsoft Windows Server 2012 R2 Datacenter |
OS Version: | Version 6.3.9600.18969 |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Java HotSpot 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 |
JVM Command-line Options: | -server -Xmx1550m -Xms1550m -Xmn1300m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=2 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:+AggressiveOpts |
JVM Affinity: | start /NODE [0,2,4,6] /AFFINITY [0x3,0xC,0x30,0xC0,0xC000,0x30000,0xC0000,0x30000000,0xC0000000,0x300000000,0xC00000000,0xC0000000000,0x300000000000,0xC00000000000]; start /NODE [1,3,5,7] /AFFINITY [0x3,0xC,0x30,0x3000,0xC000,0x30000,0xC0000,0x30000000,0xC0000000,0x300000000,0x30000000000,0xC0000000000,0x300000000000,0xC00000000000] |
JVM Instances: | 112 |
JVM Initial Heap (MB): | 1550 |
JVM Maximum Heap (MB): | 1550 |
JVM Address Bits: | 64 |
Boot Firmware Version: | 1.1.1 |
Management Firmware Version: | 3.19.19.19 A00 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | none |
Hardware | |
---|---|
Hardware Vendor: | Dell Inc |
Model: | PowerEdge R410 |
CPU Description: | Intel Xeon E5620, 2.40 GHz |
Memory amount (GB): | 32.0 |
Software | |
---|---|
Operating System (OS): | Microsoft Windows Server 2008 R2 Enterprise Edition Service Pack 1 |
JVM Vendor: | Oracle Corporation |
JVM Version: | Hotspot(TM) Client VM, version 1.8.0_121 |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa Meters and Instruments Corporation |
Model: | WT210 |
Serial Number: | 91KA21979 |
Connectivity: | RS-232 |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | TesCom |
Calibration Label: | 66762 |
Date of Calibration: | 27-Feb-2018 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.8.1-260d064e-20161220 |
Setup Description: | Connected to power supply |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.10.26.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 25 mm in front of SUT main airflow intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 939 | 23.8 |
90% | 839 | 24.6 |
80% | 710 | 24.9 |
70% | 592 | 24.6 |
60% | 511 | 24.4 |
50% | 442 | 24.1 |
40% | 383 | 23.8 |
30% | 333 | 23.3 |
20% | 286 | 22.9 |
10% | 237 | 22.6 |
Active Idle | 89.8 | 22.3 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
208V / 60 Hz / 1 phase / 2 wires | 22.3 | 255 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 11,617,480 | ||
Calibration 2 | 11,591,616 | ||
Calibration 3 | 11,581,508 | ||
ssj_ops@calibrated=11,586,562 | |||
100% | 99.7% | 11,586,562 | 11,546,450 |
90% | 89.8% | 10,427,906 | 10,410,491 |
80% | 80.0% | 9,269,249 | 9,269,726 |
70% | 70.0% | 8,110,593 | 8,115,275 |
60% | 60.0% | 6,951,937 | 6,951,588 |
50% | 50.0% | 5,793,281 | 5,789,642 |
40% | 40.0% | 4,634,625 | 4,630,544 |
30% | 30.0% | 3,475,969 | 3,471,869 |
20% | 20.0% | 2,317,312 | 2,315,782 |
10% | 10.0% | 1,158,656 | 1,157,942 |
Active Idle | 0 | 0 |