Hewlett Packard Enterprise ProLiant ML350 Gen10 | SPECpower_ssj2008 = 11,611 overall ssj_ops/watt | ||||
Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Mar 11, 2019 |
Hardware Availability: | Apr-2019 | Software Availability: | Mar-2018 | Publication: | Apr 2, 2019 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.7% | 5,937,591 | 474 | 12,525 |
90% | 89.8% | 5,351,933 | 428 | 12,513 |
80% | 80.0% | 4,768,287 | 373 | 12,770 |
70% | 70.0% | 4,170,981 | 318 | 13,131 |
60% | 60.1% | 3,581,021 | 278 | 12,882 |
50% | 50.0% | 2,976,897 | 241 | 12,348 |
40% | 40.0% | 2,383,796 | 207 | 11,500 |
30% | 29.9% | 1,783,847 | 175 | 10,168 |
20% | 20.0% | 1,191,308 | 147 | 8,099 |
10% | 10.0% | 596,719 | 122 | 4,910 |
Active Idle | 0 | 56.8 | 0 | |
∑ssj_ops / ∑power = | 11,611 |
Set Identifier: | SUT |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | SUT |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant ML350 Gen10 |
Form Factor: | Tower |
CPU Name: | Intel Xeon Platinum 8280 @ 2.70GHz |
CPU Characteristics: | 28-Core, 2.70 GHz, 38.5MB L3 Cache |
CPU Frequency (MHz): | 2700 |
CPU(s) Enabled: | 56 cores, 2 chips, 28 cores/chip |
Hardware Threads: | 112 (2 / core) |
CPU(s) Orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 1 MB I+D on chip per core |
Tertiary Cache: | 39424 KB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 192 |
# and size of DIMM: | 12 x 16384 MB |
Memory Details: | 12 x 16GB 2Rx8 PC4-2933Y-R ECC; slots 1, 3, 5, 8, 10 and 12 populated on each CPU socket |
Power Supply Quantity and Rating (W): | 1 x 800 |
Power Supply Details: | HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit 96% (865438-B21) |
Disk Drive: | 1 x HPE 240GB 6G SATA M.2 SSD (875488-B21) |
Disk Controller: | HPE Smart Array S100i SR Gen10 |
# and type of Network Interface Cards (NICs) Installed: | 1 x HPE Ethernet 1Gb 4-port 369i Adapter |
NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | Performance Heatsinks, M.2 Universal Enablement Card Kit (878783-B21), HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | SUSE Linux Enterprise Server 12 SP4 |
OS Version: | 4.12.14-94.41-default |
Filesystem: | XFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 |
JVM Command-line Options: | -server -Xmn19g -Xms21g -Xmx21g -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:AllocatePrefetchDistance=384 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=37 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=28 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC |
JVM Affinity: | numactl --cpunodebind=[0-3] --localalloc |
JVM Instances: | 4 |
JVM Initial Heap (MB): | 21000 |
JVM Maximum Heap (MB): | 21000 |
JVM Address Bits: | 64 |
Boot Firmware Version: | U41 v2.00 (02/02/2019) |
Management Firmware Version: | 1.40 Feb 05 2019 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | HPE Service Pack for ProLiant (SPP) - Version 2019.03.0 (Mar 2019) |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL360 G9 |
CPU Description: | 2x Intel Xeon E5-2660 v3 |
Memory amount (GB): | 128 |
Software | |
---|---|
Operating System (OS): | Windows Server 2012 R2 Standard |
JVM Vendor: | Oracle Corporation |
JVM Version: | 1.8.0_181-b13 (build 25.181-b13, mixed mode) |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa |
Model: | WT210 |
Serial Number: | 91GB47167 |
Connectivity: | GPIB vi NI GPIB-USB-HS |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | TRANSCAT |
Calibration Label: | 5-EL6R4-80-1 |
Date of Calibration: | 05-Jun-2018 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.8.1-260d064e-20161220 |
Setup Description: | SUT Power Supply 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 474 | 22.2 |
90% | 428 | 22.1 |
80% | 373 | 22.1 |
70% | 318 | 22.1 |
60% | 278 | 22.1 |
50% | 241 | 22.1 |
40% | 207 | 22.2 |
30% | 175 | 22.2 |
20% | 147 | 22.2 |
10% | 122 | 22.2 |
Active Idle | 56.8 | 22.2 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
220V / 60 Hz / 1 phase / 2 wires | 22.1 | 132 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 5,966,092 | ||
Calibration 2 | 5,959,869 | ||
Calibration 3 | 5,956,101 | ||
ssj_ops@calibrated=5,957,985 | |||
100% | 99.7% | 5,957,985 | 5,937,591 |
90% | 89.8% | 5,362,187 | 5,351,933 |
80% | 80.0% | 4,766,388 | 4,768,287 |
70% | 70.0% | 4,170,590 | 4,170,981 |
60% | 60.1% | 3,574,791 | 3,581,021 |
50% | 50.0% | 2,978,993 | 2,976,897 |
40% | 40.0% | 2,383,194 | 2,383,796 |
30% | 29.9% | 1,787,396 | 1,783,847 |
20% | 20.0% | 1,191,597 | 1,191,308 |
10% | 10.0% | 595,799 | 596,719 |
Active Idle | 0 | 0 |