Fujitsu FUJITSU Server PRIMERGY TX1320 M6 | SPECpower_ssj2008 = 10,980 overall ssj_ops/watt | ||||
Test Sponsor: | Fujitsu | SPEC License #: | 19 | Test Method: | Single Node |
Tested By: | Fujitsu | Test Location: | Kawasaki, Kanagawa, Japan | Test Date: | Mar 22, 2024 |
Hardware Availability: | Apr-2024 | Software Availability: | Aug-2022 | Publication: | Apr 23, 2024 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.9% | 1,188,203 | 85.6 | 13,876 |
90% | 90.1% | 1,071,548 | 79.9 | 13,419 |
80% | 80.1% | 952,747 | 73.8 | 12,912 |
70% | 70.0% | 832,889 | 67.6 | 12,319 |
60% | 59.9% | 712,301 | 61.4 | 11,603 |
50% | 49.8% | 592,276 | 54.8 | 10,806 |
40% | 39.9% | 474,069 | 47.6 | 9,951 |
30% | 30.1% | 357,893 | 40.7 | 8,791 |
20% | 20.1% | 239,231 | 34.7 | 6,887 |
10% | 10.1% | 120,383 | 29.0 | 4,146 |
Active Idle | 0 | 20.6 | 0 | |
∑ssj_ops / ∑power = | 10,980 |
Set Identifier: | TX1320M6 |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | Single Node |
Hardware | |
---|---|
Hardware Vendor: | Fujitsu |
Model: | FUJITSU Server PRIMERGY TX1320 M6 |
Form Factor: | Tower |
CPU Name: | Intel Xeon E-2488 |
CPU Characteristics: | 8-Core, 3.20 GHz, 24 MB L3 Cache |
CPU Frequency (MHz): | 3200 |
CPU(s) Enabled: | 8 cores, 1 chip, 8 cores/chip |
Hardware Threads: | 16 (2 / core) |
CPU(s) Orderable: | 1 chip |
Primary Cache: | 32 KB I + 48 KB D on chip per core |
Secondary Cache: | 2 MB I+D on chip per core |
Tertiary Cache: | 24 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 32 |
# and size of DIMM: | 2 x 16384 MB |
Memory Details: | 2 x 16 GB 1Rx8 PC5-4800B; slots 1A, 1B populated |
Power Supply Quantity and Rating (W): | 1 x 280 |
Power Supply Details: | Standard 280W Platinum PSU, S26113-E665-V71-1 |
Disk Drive: | 1 x SSD M.2 240GB, PYBMF24YN5 |
Disk Controller: | Integrated SATA Controller |
# and type of Network Interface Cards (NICs) Installed: | 2 x RJ45 with integrated LEDs for fixed onboard 1Gb LAN |
NICs Enabled in Firmware / OS / Connected: | 1/2/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Power saver |
Operating System (OS): | Windows Server 2022 Standard |
OS Version: | Version 21H2, OS build 20348.587 |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.16.1+1-LTS, mixed mode) |
JVM Command-line Options: | -server -Xmn11500m -Xms13000m -Xmx13000m -XX:+UseLargePages -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=2 -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:-UseAdaptiveSizePolicy -XX:+UseParallelOldGC -XX:FreqInlineSize=2500 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:-ThreadLocalHandshakes -XX:UseAVX=0 |
JVM Affinity: | START /AFFINITY [0xffff] |
JVM Instances: | 1 |
JVM Initial Heap (MB): | 13000 |
JVM Maximum Heap (MB): | 13000 |
JVM Address Bits: | 64 |
Boot Firmware Version: | R1.0.0 |
Management Firmware Version: | 2.50f |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | None |
Set the following options in BIOS.
Set the following options in OS.
Hardware | |
---|---|
Hardware Vendor: | Fujitsu |
Model: | PRIMERGY RX2530 M2 |
CPU Description: | 2 x Intel Xeon E5-2643 v4 |
Memory amount (GB): | 64 |
Software | |
---|---|
Operating System (OS): | Windows Server 2019 Standard |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 25.211-b12, mixed mode), version 1.8.0_211 |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Hioki |
Model: | PW3336 |
Serial Number: | 170213562 |
Connectivity: | RS-232 |
Input Connection: | Default |
Metrology Institute: | AIST (National Institute of Advanced Science and Technology) |
Accredited by: | Kyosai Technos Co.,Ltd. |
Calibration Label: | RY236003993 |
Date of Calibration: | 21-Jun-2023 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.11.0-a4047d62-20231205 |
Setup Description: | Connected to PSU 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | Watchport Virtual Port 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main air intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 85.6 | 23.2 |
90% | 79.9 | 23.2 |
80% | 73.8 | 23.2 |
70% | 67.6 | 23.3 |
60% | 61.4 | 23.3 |
50% | 54.8 | 23.3 |
40% | 47.6 | 23.3 |
30% | 40.7 | 23.3 |
20% | 34.7 | 23.3 |
10% | 29.0 | 23.3 |
Active Idle | 20.6 | 23.3 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
200V / 50 Hz / 1 phase / 2 wires | 23.2 | 11 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 1,192,442 | ||
Calibration 2 | 1,189,887 | ||
Calibration 3 | 1,188,816 | ||
ssj_ops@calibrated=1,189,352 | |||
100% | 99.9% | 1,189,352 | 1,188,203 |
90% | 90.1% | 1,070,416 | 1,071,548 |
80% | 80.1% | 951,481 | 952,747 |
70% | 70.0% | 832,546 | 832,889 |
60% | 59.9% | 713,611 | 712,301 |
50% | 49.8% | 594,676 | 592,276 |
40% | 39.9% | 475,741 | 474,069 |
30% | 30.1% | 356,805 | 357,893 |
20% | 20.1% | 237,870 | 239,231 |
10% | 10.1% | 118,935 | 120,383 |
Active Idle | 0 | 0 |