Hewlett Packard Enterprise ProLiant DL380a Gen11 | SPECpower_ssj2008 = 15,365 overall ssj_ops/watt | ||||
Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Mar 30, 2024 |
Hardware Availability: | Feb-2024 | Software Availability: | Jan-2024 | Publication: | May 2, 2024 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.7% | 13,424,462 | 648 | 20,712 |
90% | 90.0% | 12,126,235 | 609 | 19,901 |
80% | 80.0% | 10,778,597 | 565 | 19,092 |
70% | 70.0% | 9,430,417 | 521 | 18,091 |
60% | 60.0% | 8,079,008 | 478 | 16,909 |
50% | 50.0% | 6,732,893 | 438 | 15,388 |
40% | 40.0% | 5,390,219 | 401 | 13,432 |
30% | 30.0% | 4,042,241 | 365 | 11,086 |
20% | 20.0% | 2,692,023 | 330 | 8,150 |
10% | 10.0% | 1,349,575 | 296 | 4,567 |
Active Idle | 0 | 169 | 0 | |
∑ssj_ops / ∑power = | 15,365 |
Set Identifier: | SUT |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | SUT |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL380a Gen11 |
Form Factor: | 2U |
CPU Name: | Intel Xeon Platinum 8592+ 1.90 GHz (Intel Turbo Boost Technology up to 3.90 GHz) |
CPU Characteristics: | 64-Core, 1.90 GHz, 320 MB L3 Cache |
CPU Frequency (MHz): | 1900 |
CPU(s) Enabled: | 128 cores, 2 chips, 64 cores/chip |
Hardware Threads: | 256 (2 / core) |
CPU(s) Orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 48 KB D on chip per core |
Secondary Cache: | 2 MB I+D on chip per core |
Tertiary Cache: | 320 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 256 |
# and size of DIMM: | 16 x 16384 MB |
Memory Details: | 16 GB 1Rx8 PC5-5600; slots 1, 2, 4, 5, 8, 9, 11 and 12 populated on each socket |
Power Supply Quantity and Rating (W): | 1 x 1600 |
Power Supply Details: | HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit (P38997-B21) |
Disk Drive: | 1 x HPE 3.2tb NVMe Mixed Use sff BC U.3 tlc SSD (P50230-B21) |
Disk Controller: | embedded SATA |
# and type of Network Interface Cards (NICs) Installed: | 1 x Intel Eth Adptr I350T4 OCPv3 (P08449-B21) |
NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | Microsoft Windows Server Datacenter 2022 |
OS Version: | Version 21H2 (OS Build 20348.1129) |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Java HotSpot(TM) 64-Bit Server VM (build 17.0.10+11-LTS-240, mixed mode, sharing) |
JVM Command-line Options: | -server -Xms1600m -Xmx1600m -Xmn1400m -XX:+UseParallelGC -XX:ParallelGCThreads=2 -XX:+UseLargePages -XX:LargePageSizeInBytes=2m -XX:+UseBiasedLocking -XX:InlineSmallCode=1500 -XX:UseAVX=1 -XX:AutoBoxCacheMax=20000 -XX:+OptimizeFill -XX:+AggressiveHeap |
JVM Affinity: | start /NODE [0,1,2,3] /AFFINITY [0x3-0xC0000000] |
JVM Instances: | 128 |
JVM Initial Heap (MB): | 1600 |
JVM Maximum Heap (MB): | 1600 |
JVM Address Bits: | 64 |
Boot Firmware Version: | U58 v2.20 (03/01/2024) |
Management Firmware Version: | 1.56 Jan 27 2024 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | HPE ProLiant Agentless Management Service for Windows x64 |
Hardware | |
---|---|
Hardware Vendor: | Hewlett-Packard Company |
Model: | ProLiant DL360p Gen8 |
CPU Description: | Intel Xeon E5-2660 v3 |
Memory amount (GB): | 128 |
Software | |
---|---|
Operating System (OS): | Windows Server 2019 |
JVM Vendor: | Oracle Corporation |
JVM Version: | 1.8.0_251-b08 |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa |
Model: | WT210 |
Serial Number: | 91GB45372 |
Connectivity: | GPIB vi NI GPIB-USB-HS |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | TRANSCAT |
Calibration Label: | 5-HC75N-60-1 |
Date of Calibration: | 16-May-2023 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.10.0-82175bac-20220817 |
Setup Description: | SUT Power Supply 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 648 | 21.6 |
90% | 609 | 21.4 |
80% | 565 | 21.2 |
70% | 521 | 21.9 |
60% | 478 | 21.4 |
50% | 438 | 21.4 |
40% | 401 | 22.1 |
30% | 365 | 21.4 |
20% | 330 | 21.5 |
10% | 296 | 21.9 |
Active Idle | 169 | 21.4 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
208V / 60 Hz / 1 phase / 2 wires | 21.2 | 132 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 13,630,533 | ||
Calibration 2 | 13,466,182 | ||
Calibration 3 | 13,467,973 | ||
ssj_ops@calibrated=13,467,077 | |||
100% | 99.7% | 13,467,077 | 13,424,462 |
90% | 90.0% | 12,120,370 | 12,126,235 |
80% | 80.0% | 10,773,662 | 10,778,597 |
70% | 70.0% | 9,426,954 | 9,430,417 |
60% | 60.0% | 8,080,246 | 8,079,008 |
50% | 50.0% | 6,733,539 | 6,732,893 |
40% | 40.0% | 5,386,831 | 5,390,219 |
30% | 30.0% | 4,040,123 | 4,042,241 |
20% | 20.0% | 2,693,415 | 2,692,023 |
10% | 10.0% | 1,346,708 | 1,349,575 |
Active Idle | 0 | 0 |